journal article·2024-04

ETFE-grafting ionomers for anion exchange membrane water electrolyzers with a current density of 11.2 A cm−2

Chuan Hu, Young Jun Lee, Joon Yong Sohn, Hyewon Hwang, Seung Won Jung, Young Moo Lee

Publisher page

Abstract

In the quest for efficient and sustainable hydrogen production, anion exchange membrane (AEM) water electrolyzers (AEMWEs) have gained significant attention. Development of AEMs has accelerated in the past few decades while the significance of the ionomer on AEMWE performance and durability is always unrecognized. In this study, we proposed a class of electrochemically durable ionomers by introducing the piperidinium group onto the ethylene tetrafluoroethylene (ETFE) backbone using a radiation grafting technology. To avoid disruption of the conformation of the piperidinium group during the functionalization process, we grafted the piperidinium group onto the polymer backbone at the gamma position of the N-piperidinium group using trifluoromethanesulfonic acid as a catalyst. The prepared ETFE-g-poly(styryl propyl piperidinium) ionomers exhibited outstanding electrochemical properties and enhanced alkaline stability. Most notably, the corresponding AEMWEs demonstrated an impressive current density of 11.2 A cm −2 at 2.0 V under 80 °C in 1 M KOH solution. Furthermore, they were continuously operated at a current density of 0.5 A cm −2 for over 300 h with a low voltage decay rate of 0.12 mV h −1. This study offers valuable insights into the development of robust solid-state ionomers through radiation grafting, paving the way for high-performance AEMWEs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Hybrid Renewable Energy Systems · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. High-performance anion exchange membrane water electrolyzers with a current density of 7.68 A cm−2 and a durability of 1000 hours10.1039/D1EE02642A ↗
2. Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments10.1039/D0CS01079K ↗
3. Anion-exchange membrane water electrolyzers10.1021/acs.chemrev.1c00854 ↗
4. Challenges of industrial-scale testing infrastructure for green hydrogen technologies10.3390/en16083604 ↗
5. A review of water electrolysis-based systems for hydrogen production using hybrid/solar/wind energy systems10.1007/s11356-022-23323-y ↗
6. Reinforced poly(dibenzyl-co-terphenyl piperidinium) membranes for highly durable anion-exchange membrane water electrolysis at 2 A cm−2 for 1000 h10.1016/j.nxener.2023.100044 ↗
7. Highly quaternized polystyrene ionomers for high performance anion exchange membrane water electrolysers10.1038/s41560-020-0577-x ↗
8. Dual regulation both intrinsic activity and mass transport for self-supported electrodes using in anion exchange membrane water electrolysis10.1016/j.cej.2021.133942 ↗
9. Hydrogen production by PEM water electrolysis – a review
10. A novel ion-solvating polymer electrolyte based on imidazole-containing polymers for alkaline water electrolysis10.1016/j.memsci.2022.121186 ↗
11. Low cost hydrogen production by anion exchange membrane electrolysis: a review10.1016/j.rser.2017.05.258 ↗
12. Chemically durable polymer electrolytes for solid-state alkaline water electrolysis10.1016/j.jpowsour.2017.07.090 ↗
13. Effect of anion exchange ionomer content on electrode performance in AEM water electrolysis10.1016/j.ijhydene.2020.07.202 ↗
14. Poly(Alkyl-Terphenyl piperidinium) ionomers and membranes with an outstanding alkaline-membrane fuel-cell performance of 2.58 W cm(-2)10.1002/anie.202013395 ↗
15. Poly(fluorenyl aryl piperidinium) membranes and ionomers for anion exchange membrane fuel cells10.1038/s41467-021-22612-3 ↗
16. Poly(aryl piperidinium) membranes and ionomers for hydroxide exchange membrane fuel cells10.1038/s41560-019-0372-8 ↗
17. A high conductivity ultrathin anion-exchange membrane with 500+ h alkali stability for use in alkaline membrane fuel cells that can achieve 2 W cm− 2 at 80 C10.1039/C8TA04783A ↗
18. The importance of water transport in high conductivity and high-power alkaline fuel cells
19. Achieving high‐performance and 2000 h stability in anion exchange membrane fuel cells by manipulating ionomer properties and electrode optimization10.1002/aenm.202001986 ↗
20. Opportunities of ionomer development for anion-exchange membrane water electrolysis10.1021/acsenergylett.3c01040 ↗
21. Sulfonated phenylene/quinquephenylene/perfluoroalkylene terpolymers as proton exchange membranes for fuel cells10.1021/acsaem.7b00162 ↗
22. Adsorption of polyaromatic backbone impacts the performance of anion exchange membrane fuel cells10.1021/acs.chemmater.9b01092 ↗
23. Impact of ionomer adsorption on alkaline hydrogen oxidation activity and fuel cell performance10.1016/j.coelec.2018.11.012 ↗
24. How does a small structural change of anode ionomer make a big difference in alkaline membrane fuel cell performance?10.1039/C9TA10157H ↗
25. Cationic metallo-polyelectrolytes for robust alkaline anion-exchange membranes10.1002/anie.201712387 ↗
26. Highly conductive and chemically stable alkaline anion exchange membranes via ROMP of trans-cyclooctene derivatives10.1073/pnas.1900988116 ↗
27. Polymerization reactions and modifications of polymers by ionizing radiation10.3390/polym12122877 ↗
28. High performance aliphatic-heterocyclic benzyl-quaternary ammonium radiation-grafted anion-exchange membranes10.1039/C6EE01958G ↗
29. Radiation-grafted anion-exchange membranes: the switch from low- to high-density polyethylene leads to remarkably enhanced fuel cell performance10.1039/C9EE00331B ↗
30. Insight into the alkaline stability of N-heterocyclic ammonium groups for anion-exchange polyelectrolytes10.1002/anie.202105231 ↗
31. Alkaline stability of quaternary ammonium cations for alkaline fuel cell membranes and ionic liquids10.1002/cssc.201403022 ↗
32. Functionalizing polystyrene with N-alicyclic piperidine-based cations via friedel-crafts alkylation for highly alkali-stable anion-exchange membranes10.1021/acs.macromol.0c00201 ↗
33. Elucidating the role of alkyl chain in poly(aryl piperidinium) copolymers for anion exchange membrane fuel cells10.1016/j.memsci.2022.120341 ↗
34. New anion conducting membranes based on functionalized styrene-butadiene-styrene triblock copolymer for fuel cells applications10.1002/pola.24781 ↗
35. Poly(arylene piperidine)s with phosphoric acid doping as high temperature polymer electrolyte membrane for durable, high-performance fuel cells10.1016/j.jpowsour.2019.227219 ↗
36. Radiation-induced grafting of a butyl-spacer styrenic monomer onto ETFE: the synthesis of the most alkali stable radiation-grafted anion-exchange membrane to date10.1039/C7TA10222D ↗