journal article·2024-02

Corrosion behavior of selective laser melted 6061 aluminum alloy electrodes for aluminum-air battery

Yiqing Ma, Kunpeng Li, Chenglong Li, Xiaojin Miao, Takuto Araki, Meiping Wu

Publisher page

Abstract

6061 aluminum alloy can be used as an anode for aluminum-air batteries. Compared with cast one, three-dimensional (3D) printed aluminum alloy shows more flexible design and production process. Moreover, the self-corrosion behavior of 3D printed aluminum alloy without grinding its surface layer in alkaline solutions (electrolyte for aluminum-air batteries) is unclear. Here, the comparison between 3D-printed and cast 6061 aluminum alloy is investigated by self-corrosion testing, potentiodynamic polarization, electrochemical impedance spectroscopy, and hydrogen bubble visualization experimentation. The results show that although the corrosion resistance of the 3D-printed 6061 aluminum alloy decreases rapidly with time, it exhibits higher corrosion resistance at the initial stage of corrosion than that of cast 6061 aluminum alloy due to the “fish scale” layer and may be able to improve its discharge performance. The surface microscopy analysis results are in good agreement with those of the self-corrosion test and electrochemical characteristics.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Design and analysis of aluminum/air battery system for electric vehicles[J]10.1016/S0378-7753(02)00370-1 ↗
2. Inhibition effect and mechanism of Na2SnO3‐ethylene glycol hybrid additives on 1060 aluminum in alkaline aluminum‐air batteries[J]10.1002/slct.202004844 ↗
3. Aluminum–air battery based on an ionic liquid electrolyte[J]10.1039/C4TA04721D ↗
4. Solid-state Al-air battery with an ethanol gel electrolyte[J]10.1016/j.gee.2021.05.011 ↗
5. Aluminum-air battery with cotton substrate:Controlling the discharge capacity by electrolyte pre-deposition[J]10.1016/j.gee.2021.05.003 ↗
6. A comprehensive review on recent progress in aluminum–air batteries[J]10.1016/j.gee.2017.06.006 ↗
7. High power density Al-air batteries with commercial three-dimensional aluminum foam anode[J]10.1007/s11581-020-03618-1 ↗
8. Three-dimensional electrodes and battery architectures[J]10.1557/mrs.2011.156 ↗
9. Fabrication of porous metal by selective laser melting as catalyst support for hydrogen production microreactor[J]10.1016/j.ijhydene.2019.10.173 ↗
10. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V[J]10.1016/j.actamat.2010.02.004 ↗
11. Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences[J]10.1021/ac403397r ↗
12. 319G-Master: a novel 3D printed ACL graft preparation system that improves speed and autonomy[J]
13. 3D printing of metal–organic framework composite materials for clean energy and environmental applications[J]10.1039/D1TA08777K ↗
14. Selective laser melting of TiB2/AlSi10Mg composite: processability, microstructure and fracture behavior[J]10.1016/j.jmatprotec.2021.117386 ↗
15. The dependence of hydrogen embrittlement on hydrogen transport in selective laser melted 304L stainless steel[J]10.1016/j.ijhydene.2021.02.035 ↗
16. Machine learning based very-high-cycle fatigue life prediction of Ti-6Al-4V alloy fabricated by selective laser melting[J]10.1016/j.ijfatigue.2022.106764 ↗
17. Microstructural evolution and mechanical properties of Inconel 718 alloy manufactured by selective laser melting after solution and double aging treatments[J]10.1016/j.jallcom.2022.164988 ↗
18. Selective Laser Melting of aluminium alloy using a uniform beam profile: the paper analyzes the results of laser scanning in Selective Laser Melting using a uniform laser beam[J]10.1080/17452759.2013.869608 ↗
19. Numerical investigation and an effective modelling on the Selective Laser Melting (SLM) process with aluminium alloy 6061[J]10.1016/j.ijheatmasstransfer.2014.09.014 ↗
20. Grain refinement of laser remelted Al-7Si and 6061 aluminium alloys with Tibor∼® and scandium additions[J]10.1016/j.jmapro.2018.08.030 ↗
21. A comparative study of corrosion behavior of an additively manufactured Al-6061 RAM2 with extruded Al-6061 T6[J]
22. Influence of heat treatment on corrosion behavior of rare earth element Sc modified Al-Mg alloy processed by selective laser melting[J]10.1016/j.apsusc.2020.145330 ↗
23. Selective laser melting of aluminium components[J]10.1016/j.jmatprotec.2010.09.019 ↗
24. Suppressing corrosion and hydrogen gas evolution in aluminum–air batteries via conductive nanocomposites[J]
25. Evaluation of alloy anodes for aluminum‐air batteries III. Mechanisms of activation, passivation, and hydrogen evolution[J]10.1149/1.2095347 ↗
26. The effect of zinc on the aluminum anode of the aluminum–air battery[J]10.1016/j.jpowsour.2004.06.043 ↗
27. Recent developments in materials for aluminum–air batteries: a review[J]10.1016/j.jiec.2015.08.004 ↗
28. Al–air batteries: fundamental thermodynamic limitations from first-principles theory[J]10.1021/jz502422v ↗
29. Copper-deposited aluminum anode for aluminum-air battery[J]10.1007/s10008-018-4146-1 ↗
30. Evaluation of impurities in aluminum anodes for Al-air batteries[J]10.1021/acssuschemeng.0c08415 ↗
31. Finite element analysis of melt pool thermal characteristics with passing laser in SLM process[J]10.1016/j.ijleo.2019.163068 ↗
32. Experimental analysis of spatter generation and melt-pool behavior during the powder bed laser beam melting process[J]10.1016/j.jmatprotec.2017.08.012 ↗
33. On the formation of "Fish-scale" morphology with curved grain interfacial microstructures during selective laser melting of dissimilar alloys[J]10.1016/j.actamat.2021.117331 ↗