journal article·2023-11

Impacts of cathode catalyst layer defects on performance and durability in PEM fuel cells

Jonas Stoll, Nana Zhao, Xiao-Zi Yuan, Francois Girard, Erik Kjeang, Zhiqing Shi

Publisher page

Abstract

During the manufacturing of proton exchange membrane fuel cells (PEMFCs), the cathode catalyst layer (CCL) may contain regions of partially missing material due to deficient deposition or unintentional removal. The present research objective is to understand how larger (4.0, 5.9, and 8.5%) CCL missing areas may affect the performance and durability of PEMFCs. Three different CCL missing area samples are prepared and compared to defect-free CCL baselines in this work. The results show that such CCL missing areas reduce the performance of the defective fuel cell in all regions of the polarization curve, compared to defect-free cells. At low current densities, these performance voltage reductions are linear with the current density rise, followed by an exponential reduction at high current densities. The linear slope and onset of exponential voltage reduction are related to the investigated CCL missing area. However, no significant difference in the electrochemical surface area is observed. Additionally, chemical/mechanical and electrochemical cycling tests show no significant variance in the degradation between the baseline and CCL missing area samples, indicating that CCL missing areas do not significantly influence membrane or cathode durability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. O'Hayre · 2016
2. Rand · 2018
3. Mench · 2008
4. Anode aging in polymer electrolyte membrane fuel Cells I: anode monitoring by ElectroChemical impedance spectroscopy10.1016/j.jpowsour.2020.228908 ↗
5. Fabrication method for laboratory-scale high-performance membrane electrode assemblies for fuel cells10.1021/acs.analchem.6b03005 ↗
6. Slot-die-coating operability windows for polymer electrolyte membrane fuel cell cathode catalyst layers10.1016/j.jcis.2021.11.047 ↗
7. Gravure coating for roll-to-roll manufacturing of proton-exchange-membrane fuel cell catalyst layers10.1149/2.0091813jes ↗
8. Catalyst layer optimization by surface tension control during ink formulation of membrane electrode assemblies in proton exchange membrane fuel cell10.1016/j.jpowsour.2011.01.010 ↗
9. Roll-to-roll stack and lamination of gas diffusion layer in multilayer structured membrane electrode assembly10.1177/0954405419862090 ↗
10. A novel approach to fabricate membrane electrode assembly by directly coating the nafion ionomer on catalyst layers for proton-exchange membrane fuel cells10.1021/acssuschemeng.0c02386 ↗
11. 4D in situ visualization of electrode morphology changes during accelerated degradation in fuel cells by X-ray computed tomography10.1016/j.jpowsour.2017.03.058 ↗
12. Four-dimensional identical-location X-ray imaging of fuel cell degradation during start-up/shut-down cycling10.1149/1945-7111/abe56b ↗
13. Tracking the evolution of mechanical degradation in fuel cell membranes using 4D in situ visualization10.1016/j.jpowsour.2018.11.049 ↗
14. Effect of catalyst layer defects on local membrane degradation in polymer electrolyte fuel cells10.1016/j.jpowsour.2016.05.016 ↗
15. 4D in situ visualization of mechanical degradation evolution in reinforced fuel cell membranes10.1016/j.ijhydene.2020.02.013 ↗
16. High-performance fuel cell with stretched catalyst-coated membrane: one-step formation of cracked electrode
17. Investigation of catalyst layer defects in catalyst-coated membrane for PEMFC application: non-destructive method10.1002/er.4107 ↗
18. Utilizing a segmented fuel cell to study the effects of electrode coating irregularities on PEM fuel cell initial performance10.1002/fuce.201600214 ↗
19. Impacts of electrode coating irregularities on polymer electrolyte membrane fuel cell lifetime using quasi in-situ infrared thermography and accelerated stress testing10.1016/j.ijhydene.2018.02.050 ↗
20. “Fuel Cell Technologies Office Multi-Year Research, Development, and Demonstration Plan,” p. 378, 2012.
21. In situ diagnostic of liquid water distribution in cathode catalyst layer in an operating PEMFC by high-resolution soft X-ray radiography10.1016/j.elecom.2012.05.028 ↗
22. A review of PEM fuel cell durability: materials degradation, local heterogeneities of aging and possible mitigation strategies10.1002/wene.113 ↗