High-performance and low-cost coin-cell supercapacitors based on waste graphite from spent dry-cell batteries
Source abstract
Abstract
Graphite rods extracted from spent dry-cell batteries were ground into powder and subjected to chemical activation using potassium hydroxide. The activated carbon (AC) powder showed no visible pore formation but instead appeared to have been exfoliated into thin flakes. The elemental and chemical compositions of the AC are observed to be similar to those of graphene oxide, in agreement with its surface morphology. The AC was then modified with nickel oxide (NiO) and reduced graphene oxide (rGO) and was utilized for the fabrication of supercapacitor electrodes and coin-cell supercapacitors. Increased potential window and higher overall current readings were observed in the sample with a 2:1 NiO-rGO ratio due to the redox reaction capability of NiO and fast ion transport of rGO. The electrochemical performance of the supercapacitor electrode and the coin-cell supercapacitor displayed excellent electric-double layer capacitance behavior and fast ion transfer kinetics between the electrode and electrolyte surface. The specific capacitances of the supercapacitor electrode and the coin-cell supercapacitor were determined to be 27.84 F g −1 and 20.10 F g −1, respectively, at a current density of 0.1 A g −1 . The highest energy density was found to be 40.20 Wh kg −1 at a power density of 1440 W kg −1.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Experimental investigation into the effectiveness of a super-capacitor based hybrid energy storage system for urban commercial vehicles10.1016/j.apenergy.2017.08.086 ↗
2. Lithium‐ion battery and supercapacitor‐based hybrid energy storage system for electric vehicle applications: a review10.1002/er.8439 ↗
3. Castaignet · 2020
4. Supercapacitors: properties and applications10.1016/j.est.2018.03.012 ↗
5. Three‐dimensional printing of graphene‐based materials for Energy Storage and conversion10.1002/sus2.27 ↗
6. Stamping fabrication of flexible planar micro‐supercapacitors using porous graphene inks
7. Recent advances in micro-supercapacitors for AC line-filtering performance: from fundamental models to emerging applications10.1016/j.esci.2021.11.005 ↗
8. Electrochemically induced surface reconstruction of ni‐co oxide nanosheet arrays for hybrid supercapacitors
9. Pinecone biomass-derived activated carbon: the potential electrode material for the development of symmetric and asymmetric supercapacitors
10. Sweet-lime-peels-derived activated-carbon-based electrode for highly efficient supercapacitor and flow-through water
11. Orange peel derived activated carbon for fabrication of high-energy and high-rate supercapacitors10.1002/slct.201701857 ↗
12. Activated carbon prepared from coconut shell powder with low activation time as supercapacitor electrodes10.29303/ipr.v6i1.205 ↗
13. Methylene blue enhanced bamboo activated carbon as high performance supercapacitor Electrode Materials10.1016/j.indcrop.2022.114786 ↗
14. The synthesis of activated carbon made from banana stem fibers as the supercapacitor electrodes
15. Sulfonated RGO from waste dry cell graphite rod and its hybrid with pani as electrode for Supercapacitor10.1007/s10008-021-04988-w ↗
16. Synthesizing graphene from waste mosquito repellent graphite rod by using electrochemical exfoliation for battery/supercapacitor applications
17. Multifunctional applications for waste zinc–carbon battery to synthesize carbon dots and symmetrical solid-state supercapacitors10.1039/D2RA00978A ↗
18. Hybrid two-dimensional nickel oxide-reduced graphene oxide nanosheets for supercapacitor electrodes10.1016/j.microc.2021.105979 ↗
19. Microwave-irradiated novel mesoporous nickel oxide carbon nanocomposite electrodes for supercapacitor application10.1007/s10854-021-06547-5 ↗
20. Applications of supercapacitor
21. Fabrication of Ag nanoparticles adhered on RGO based on both electrodes in dye-sensitized solar cells (dsscs)
22. Microwave-irradiated novel mesoporous nickel oxide carbon nanocomposite electrodes for supercapacitor application10.1007/s10854-021-06547-5 ↗
23. Nio-RGO composite for supercapacitor electrode
24. Facile one-pot synthesis of graphene oxide by sonication assisted mechanochemical approach and its surface chemistry10.1166/jnn.2018.14306 ↗
25. Production and utilization of biochar: a Review10.1016/j.jiec.2016.06.002 ↗
26. An overview of industrial scalable production of graphene oxide and analytical approaches for synthesis and characterization10.1016/j.jmrt.2020.08.050 ↗
27. XIII. On the atomic weight of graphite
28. Methods of graphite exfoliation10.1039/c2jm34517j ↗
29. Optimization of microwave preparation conditions for activated carbon from Albizia lebbeck seed pods for methylene blue dye adsorption10.1016/j.jaap.2013.11.005 ↗
30. Coconut husk derived activated carbon via microwave induced activation: effects of activation agents, preparation parameters and adsorption performance10.1016/j.cej.2011.12.084 ↗
31. Microwave-assisted preparation of pumpkin seed hull activated carbon and its application for the adsorptive removal of 2,4-dichlorophenoxyacetic acid10.1016/j.cej.2012.10.068 ↗
32. Emerged carbon nanomaterials from metal-organic precursors for electrochemical catalysis in energy conversion10.1016/B978-0-12-814558-6.00012-5 ↗
33. Impact of surface area in evaluation of catalyst activity10.1016/j.joule.2018.05.003 ↗
34. Optimization of highly microporous activated carbon preparation from moso bamboo using central composite design approach10.1016/j.jtice.2014.12.019 ↗
35. One-step, low temperature synthesis of reduced graphene oxide decorated with zno nanocrystals using Galvanized Iron Steel Scrap10.1088/2053-1591/ac0c9c ↗
36. Energy storage data reporting in perspective—guidelines for interpreting the performance of Electrochemical Energy Storage Systems10.1002/aenm.201902007 ↗
37. Best practice methods for determining an electrode material's performance for ultracapacitors10.1039/c0ee00074d ↗
38. Nickel hydroxide and lignocelluloses fibers based flexible paper electrodes for energy storage applications10.1007/s10854-019-01850-8 ↗
39. CuNPs/RGO/cotton fabric electrode for flexible high-performance supercapacitors10.1007/s10854-023-10334-9 ↗
40. A structurable gel-polymer electrolyte for sodium ion batteries10.1002/adfm.201701768 ↗
41. Superior Ionic transferring polymer with silicon dioxide composite membrane via phase inversion method designed for high performance sodium-ion battery10.3390/polym12020405 ↗
42. Comparative study of degradation mechanisms of commercial supercapacitors at high temperatures depending on storage conditions10.1149/1945-7111/acad36 ↗
43. High-performance flexible supercapacitors based on electrochemically tailored three-dimensional reduced graphene oxide networks10.1038/s41598-017-18593-3 ↗
44. Reducing the resistance for the use of electrochemical impedance spectroscopy analysis in materials chemistry10.1039/D1RA03785D ↗
45. Comparison of laser-synthetized nanographene-based electrodes for flexible supercapacitors10.3390/mi11060555 ↗
46. Preparation of porous nitrogen-doped activated carbon derived from rice straw for high-performance supercapacitor application10.1016/j.jtice.2021.02.021 ↗