journal article·2023-04Open access

Effect of a compressed separator on the electrochemical performance of Li-ion battery

Wei Sun, Q.M. Li, Ping Xiao, Paola Carbone

Abstract

This work investigates the effects of compressed separators on the electrochemical performance of Li-ion batteries (LIBs) and the underpinning mechanisms. Two typical commercial separators (polypropylene (PP) and polyethylene (PE)) with different compressive behaviours were used in this study. The tortuosity values of compressed PP and PE separators were determined using Electrochemical Impedance Spectrum (EIS) tests, showing that the PP separator has a higher tortuosity than that of the PE separator under given compressive stress. LIBs with the compressed PP and PE separators were tested for their capacity performance. It is found that the onset strain of densifications can be considered as the critical compressive strain for the significant reduction of LIB's capacity. The experimental observations are supported by COMSOL modelling results.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. A review of lithium ion battery failure mechanisms and fire prevention strategies10.1016/j.pecs.2019.03.002 ↗
3. A review of advanced separators for rechargeable batteries10.1016/j.jpowsour.2021.230372 ↗
4. Battery separators10.1021/cr020738u ↗
5. Characterization and performance evaluation of lithium-ion battery separators10.1038/s41560-018-0295-9 ↗
6. Topological and network analysis of lithium ion battery components: the importance of pore space connectivity for cell operation10.1039/C8EE00875B ↗
7. Stress evolution and capacity fade in constrained lithium-ion pouch cells10.1016/j.jpowsour.2013.06.165 ↗
8. Harnessing the actuation potential of solid-state intercalation compounds10.1002/adfm.200500633 ↗
9. Threefold increase in the Young's modulus of graphite negative electrode during lithium intercalation10.1149/1.3327913 ↗
10. Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells10.1016/j.jpowsour.2006.09.084 ↗
11. Designing polyolefin separators to minimize the impact of local compressive stresses on lithium ion battery performance10.1149/2.0041809jes ↗
12. Review of mechanical design and strategic placement technique of a robust battery pack for electric vehicles10.1016/j.rser.2016.03.013 ↗
13. A review of international abuse testing standards and regulations for lithium ion batteries in electric and hybrid electric vehicles10.1016/j.rser.2017.05.195 ↗
14. Mechanical properties of a battery separator under compression and tension10.1149/2.0191411jes ↗
15. A model for the behavior of battery separators in compression at different strain/charge rates10.1149/2.0111411jes ↗
16. Deformation and failure characteristics of four types of lithium-ion battery separators10.1016/j.jpowsour.2016.07.078 ↗
17. Temperature and strain rate dependent behavior of polymer separator for Li-ion batteries10.1016/j.eml.2018.01.006 ↗
18. Influences of compression on the mechanical behavior and electrochemical performances of separators for lithium ion batteries10.1021/acs.iecr.8b03855 ↗
19. The compression behavior, microstructure evolution and properties variation of three kinds of commercial battery separators under compression load10.1016/j.jpowsour.2020.227819 ↗
20. Effect of temperature on compression behavior of polypropylene separator used for Lithium-ion battery10.1016/j.jpowsour.2020.228300 ↗
21. Separator impregnated with polyvinyl alcohol to simultaneously improve electrochemical performances and compression resistance10.1016/j.electacta.2021.139568 ↗
22. Mechanical behaviors and ion transport variation of lithium-ion battery separators under various compression conditions10.1016/j.jpowsour.2022.231838 ↗
23. The effects of defects on localized plating in lithium-ion batteries10.1149/2.1051507jes ↗
24. Size dependence of transport non-uniformities on localized plating in lithium-ion batteries10.1149/2.1181805jes ↗
25. Effects of current density on defect-induced capacity fade through localized plating in lithium-ion batteries10.1149/1945-7111/abb838 ↗
26. In situ detection method for Li-ion battery of separator pore closure defects based on abnormal voltage in rest condition10.1016/j.jpowsour.2022.231785 ↗
27. Separators for lithium-ion batteries: a review on the production processes and recent developments10.1002/ente.201402215 ↗
28. Ball · 1965
29. Preparation of polyvinylidene fluoride membrane via a thermally induced phase separation using a mixed diluent10.1002/app.30184 ↗
30. 2008
31. Porosity measurements by a gas penetration method and other techniques applied to membrane characterization10.1016/S0040-6090(99)00197-2 ↗
32. Characterization and analysis of porosity and pore structures10.2138/rmg.2015.80.04 ↗
33. A study on the relationship between microstructure and mechanical properties of porous polymer films10.1016/j.polymer.2020.122784 ↗
34. Characterising the structural properties of polymer separators for lithium-ion batteries in 3D using phase contrast X-ray microscopy10.1016/j.jpowsour.2016.09.132 ↗
35. Understanding the microstructure behaviour of the Li-ion battery separator under compression using 3D image-based modelling10.1016/j.ijmecsci.2021.106976 ↗
36. Tortuosity: a guide through the maze10.1144/GSL.SP.1997.122.01.18 ↗
37. Tortuosity in porous media: a critical review10.2136/sssaj2012.0435 ↗
38. Tortuosity in electrochemical devices: a review of calculation approaches10.1080/09506608.2016.1249995 ↗
39. Change of conductivity with salt content, solvent composition, and temperature for electrolytes of LiPF6 in ethylene carbonate-ethyl methyl carbonate10.1149/1.1403730 ↗
40. Characteristics of porous beds and structures10.1002/aic.690020320 ↗
41. W. Sun, Q.M. Li, P. Xiao, C. Paola, Evaluation of methods for the determination of tortuosity of Li-ion battery separators, submitted to J. Energy Storage (2022), available from doi:10.48550/arXiv.2212.04988.
42. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
43. Gibson · 1999
44. Compressive strain at the onset of densification of cellular solids10.1177/0021955X06063519 ↗
45. Mark · 2009
46. Ion transport restriction in mechanically strained separator membranes10.1016/j.jpowsour.2012.10.093 ↗
47. Kinetics of rapid electrode reactions10.1039/df9470100011 ↗
48. Application of A‐C techniques to the study of lithium diffusion in tungsten trioxide thin films10.1149/1.2129668 ↗
49. Quantifying tortuosity in porous Li-ion battery materials10.1016/j.jpowsour.2008.12.032 ↗
50. On tortuosity and the tortuosity factor in flow and diffusion through porous media10.1016/0009-2509(89)85053-5 ↗
51. Electrochemical characterisation and modelling of the mass transport phenomena in LiPF6–EC–EMC electrolyte10.1016/j.electacta.2008.04.023 ↗
52. Li-ion cell operation at low temperatures10.1149/2.047304jes ↗