Design of Bi2Te3-based thermoelectric generator in a widely applicable system
Source abstract
Abstract
A Bi 2Te 3 -based thermoelectric generator (TEG) system cooled by heat radiation fin (HRF) applies to most scenarios of low-temperature power generation and waste heat recovery, while the high performance of the TEG system requires the precise design of the structure. Here we developed a theoretical model to simulate the thermal-electric coupling of the TEG system and analyzed the Bi 2Te 3 -based TEG system with the aid of numerical and experimental methods. Results show that the increase in height of TEG not only improves the conversion efficiency but leads to a peak value of output power, which is much different from the traditional view that the output power solely decreases with the increase of height of TEG. Compared to the thickness of the fin, the height of the fin plays an essential role in optimizing the performance of TEG. By adding an electrical fan to improve the heat exchange coefficient, the net output power is doubled and the net conversion efficiency is improved by more than 80%. Besides, the structure of the TEG system is designed for different material parameters via the theoretical method. We anticipate that our results will guide the design and optimization of the TEG system.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. 2021
2. FeSb2 nanoparticles embedded in 3D porous carbon framework: an robust anode material for potassium storage with long activation process
3. Potassium storage in bismuth nanoparticles embedded in N-doped porous carbon facilitated by ether-based electrolyte10.1016/j.cej.2022.137329 ↗
4. Unique spindle-like bismuth-based composite toward ultrafast potassium storage
5. Thermoelectric cooling and power generation10.1126/science.285.5428.703 ↗
6. Thermoelectric materials step up10.1038/nmat4643 ↗
7. High thermoelectric performance in low-cost SnS0.91Se0.09 crystals10.1126/science.aax5123 ↗
8. Bennett · 1995 · 515
9. Recent advances in high-performance bulk thermoelectric materials10.1080/09506608.2016.1183075 ↗
10. Skutterudites: a Phonon-Glass-Electron crystal approach to advanced thermoelectric energy conversion applications10.1146/annurev.matsci.29.1.89 ↗
11. Thermoelectric devices for power generation: recent progress and future challenges10.1002/adem.201500333 ↗
12. Advances in thermoelectrics10.1080/00018732.2018.1551715 ↗
13. Low-symmetry rhombohedral GeTe thermoelectrics10.1016/j.joule.2018.02.016 ↗
14. Significant enhancement of figure-of-merit in carbon-reinforced Cu2Se nanocrystalline solids10.1016/j.nanoen.2017.09.020 ↗
15. Superparamagnetic enhancement of thermoelectric performance10.1038/nature23667 ↗
16. Discovery of TaFeSb-based half-Heuslers with high thermoelectric performance10.1038/s41467-018-08223-5 ↗
17. Phase boundary mapping to obtain n-type Mg3Sb2-based thermoelectrics10.1016/j.joule.2017.11.005 ↗
18. Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal10.1038/s41563-021-01064-6 ↗
19. Compositional fluctuations locked by a thermal transformation yielding high thermoelectric performance in GeTe
20. Solubility design leading to high figure of merit in low-cost Ce-CoSb3 skutterudites10.1038/ncomms8584 ↗
21. Optimization of cross flow heat exchangers for thermoelectric waste heat recovery10.1016/j.enconman.2003.09.003 ↗
22. A review on bismuth telluride (Bi2Te3) nanostructure for thermoelectric applications10.1016/j.rser.2017.10.112 ↗
23. Ultra-high thermoelectric performance in bulk BiSbTe/amorphous boron composites with nano-defect architectures
24. Realizing record high performance in n-type Bi2Te3-based thermoelectric materials10.1039/D0EE01349H ↗
25. High ZT in p-type thermoelectric (Bi,Sb)2Te3 with built-in nanopores10.1039/D2EE00119E ↗
26. Experimental study on stress monitoring of sand-filled steel tube during impact using piezoceramic smart aggregates10.3390/s17081930 ↗
27. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
28. NASA's program for radioisotope power system research and development10.1063/1.1867159 ↗
29. Thermal analysis of step 2 GPHS for next generation radioisotope power source missions10.1063/1.1867204 ↗
30. Effective properties of a thermoelectric composite containing an elliptic inhomogeneity10.1016/j.ijheatmasstransfer.2019.02.088 ↗
31. Asymptotic homogenization of three-dimensional thermoelectric composites10.1016/j.jmps.2014.12.006 ↗
32. Seeking high energy conversion efficiency in a fully temperature-dependent thermoelectric medium10.1016/j.energy.2021.122440 ↗
33. Parametric study of a thermoelectric module used for both power generation and cooling10.1016/j.renene.2020.03.045 ↗
34. Power generation and thermoelectric cooling enabled by momentum and energy multiband alignments10.1126/science.abi8668 ↗
35. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗