journal article·2023-03Open access

Constructing stable interface layer for boosting high-voltage cycling performance of single-crystal Ni-rich cathodes

Jixue Shen, Bao Zhang, Alvin Dai, Xinyou He, Zhiming Xiao, Lei Yu, Tianyi Li, Jianguo Wen, Xiao Li, Tongchao Liu, Xing Ou, Khalil Amine

Abstract

Increasing demand for electric vehicles (EVs) worldwide and the requirements for environmental protection have greatly promoted the development of low-Co, Ni-rich layered cathodes due to their high energy density, reasonable cost, and less environmental pollution. Nevertheless, serious performance degradation and safety concerns resulting from structural/interfacial instability under high operating voltages (≥4.3 V) have greatly hindered its commercialization. Herein, we propose a feasible surface modification strategy by introducing a multifunctional Li 2SiO 3 (LSO) coating layer onto the surface of Co less single-crystalline LiNi 0·63Co 0·07Mn 0·3O 2 (NCM) to solve the above challenges. The uniform Li 2SiO 3 coating layer has a unique three-dimensional (3D) ion diffusion channel, which greatly promotes the transmission of Li + and alleviates interfacial stress accumulation. Equally important, the electrochemically inert Li 2SiO 3 coating layer has a stable structure framework with strong Si–O bonds, which inhibit anisotropic particle volume expansion and the occurrence of side reactions during long-term cycling. As a consequence, LSO modified NCM exhibits greatly improved electrochemical properties even at harsh testing conditions and achieves capacity retention of 79.1% after 200 cycles at 25 °C within 2.95–4.5 V in half cells. Furthermore, it provides an outstanding capacity retention of 94.7% after 300 cycles at 25 °C within 2.95–4.4 V when tested in pouch full cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
2. Batteries and fuel cells for emerging electric vehicle markets10.1038/s41560-018-0108-1 ↗
3. An advanced high-entropy fluorophosphate cathode for sodium-ion batteries with increased working voltage and energy density
4. Boosting reaction homogeneity in high-energy lithium-ion battery cathode materials10.1002/adma.202003040 ↗
5. Cathode materials for future electric vehicles and energy storage systems10.1021/acsenergylett.7b00130 ↗
6. Beyond doping and coating: prospective strategies for stable high-capacity layered Ni-rich cathodes10.1021/acsenergylett.0c00191 ↗
7. Dopant distribution in Co-free high-energy layered cathode materials10.1021/acs.chemmater.9b03603 ↗
8. Prospect and reality of Ni-rich cathode for commercialization
9. Assessing long-term cycling stability of single-crystal versus polycrystalline nickel-rich NCM in pouch cells with 6 mAh cm-2 electrodes
10. Enabling high energy lithium metal batteries via single-crystal Ni-rich cathode material co-doping strategy10.1038/s41467-022-30020-4 ↗
11. Unravelling the influence of quasi single-crystalline architecture on high-voltage and thermal stability of LiNi0.5Co0.2Mn0.3O2 cathode for lithium-ion batteries10.1016/j.cej.2020.124709 ↗
12. Crack-free single-crystalline Ni-rich layered NCM cathode enable superior cycling performance of lithium-ion batteries10.1016/j.nanoen.2020.104450 ↗
13. Kinetic limitations in single-crystal high-nickel cathodes10.1002/anie.202012773 ↗
14. Boosting high‐voltage and ultralong‐cycling performance of single‐crystal LiNi0.5Co0.2Mn0.3O2 cathode materials via three‐in‐one modification
15. Valuation of surface coatings in high-energy density lithium-ion battery cathode materials10.1016/j.ensm.2021.03.015 ↗
16. In situ inorganic conductive network formation in high-voltage single-crystal Ni-rich cathodes10.1038/s41467-021-25611-6 ↗
17. Realizing ultrahigh-voltage performance of single-crystalline LiNi0.55Co0.15Mn0.3O2 cathode materials by simultaneous Zr-doping and B2O3-coating10.1016/j.jallcom.2022.163999 ↗
18. Reinforcing cycling stability and rate capability of LiNi0.5Mn1.5O4 cathode by dual-modification of coating and doping of a fast-ion conductor10.1016/j.materresbull.2017.12.050 ↗
19. A superior Li2SiO3-composited LiNi0.5Mn1.5O4 cathode for high-voltage and high-performance lithium-ion batteries10.1016/j.electacta.2017.03.066 ↗
20. Enhanced surface chemical and structural stability of Ni-rich cathode materials by synchronous lithium-ion conductor coating for lithium-ion batteries10.1021/acsami.9b21264 ↗
21. Ionic conductor of Li2SiO3 as an effective dual-functional modifier to optimize the electrochemical performance of Li4Ti5O12 for high-performance Li-ion batteries10.1021/acsami.6b10795 ↗
22. Insight of a phase compatible surface coating for long‐durable Li‐rich layered oxide cathode10.1002/aenm.201901795 ↗
23. Interplay between cation and anion redox in Ni-based disordered rock-salt cathodes10.1021/acsnano.1c03289 ↗
24. Lithium Nickel Cobalt Manganese Oxide synthesized using alkali chloride flux: morphology and performance as a cathode material for lithium ion batteries10.1021/am300386j ↗
25. Synthesis of complex nanomaterials via Ostwald ripening10.1039/C3TA14203E ↗
26. Nano-TiO2 coated single-crystal LiNi0.65Co0.15Mn0.2O2 for lithium-ion batteries with a stable structure and excellent cycling performance at a high cut-off voltage10.1039/D2TA00135G ↗
27. Synthesis of single crystal LiNi0.6Mn0.2Co0.2O2 with enhanced electrochemical performance for lithium ion batteries10.1149/2.0951805jes ↗
28. Surface modification of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material by tungsten oxide coating for improved electrochemical performance in lithium-ion batteries10.1021/acsami.9b02889 ↗
29. In situ formed LiNi0.8Co0.15Al0.05O2@Li4SiO4 composite cathode material with high rate capability and long cycling stability for lithium-ion batteries10.1016/j.nanoen.2018.09.014 ↗
30. Ultralow‐strain Zn‐substituted layered oxide cathode with suppressed P2–O2 transition for stable sodium ion storage
31. Dual conductive surface engineering of Li-rich oxides cathode for superior high-energy-density Li-ion batteries10.1016/j.nanoen.2019.03.012 ↗
32. Construction of Li3PO4 nanoshells for the improved electrochemical performance of a Ni-rich cathode material10.1039/D1CC06131C ↗
33. Microstructure boosting the cycling stability of LiNi0.6Co0.2Mn0.2O2 cathode through Zr-based dual modification10.1016/j.ensm.2020.12.026 ↗
34. A Molten-salt method to synthesize ultrahigh-nickel single-crystalline LiNi0.92Co0.06Mn0.02O2 with superior electrochemical performance as cathode material for lithium-ion batteries10.1002/smll.202201946 ↗
35. Optimization of Ni2+/Ni3+ ratio in layered Li(Ni,Mn,Co)O2 cathodes for better electrochemistry10.1016/j.jpowsour.2007.06.051 ↗
36. The effect of B2O3/Li3BO3 coating and B3+ doping on electrochemical properties in nickel-rich single-crystal LiNi0.7Co0.2Mn0.1O2 cathodes10.1016/j.jallcom.2022.164489 ↗
37. Ultrathin Li-Si-O coating layer to stabilize the surface structure and prolong the cycling life of single-crystal LiNi0.6Co0.2Mn0.2O2 cathode materials at 4.5 V10.1021/acsami.0c22356 ↗
38. The role of Zr doping in stabilizing LiNi0.6Co0.2Mn0.2O2 as a cathode material for lithium-ion batteries10.1002/cssc.201900500 ↗
39. Simultaneously dual modification of Ni-rich layered oxide cathode for high-energy lithium-ion batteries
40. Cobalt-free nickel rich layered oxide cathodes for lithium-ion batteries10.1021/am403684z ↗
41. Cobalt-free, high-nickel layered oxide cathodes for lithium-ion batteries: progress, challenges, and perspectives10.1016/j.ensm.2020.09.020 ↗
42. MnPO4-coated Li(Ni0.4Co0.2Mn0.4)O2 for lithium(-ion) batteries with outstanding cycling stability and enhanced lithiation kinetics
43. Dynamic behaviour of interphases and its implication on high-energy-density cathode materials in lithium-ion batteries
44. Mitigating interfacial potential drop of cathode-solid electrolyte via ionic conductor layer to enhance interface dynamics for solid batteries10.1021/jacs.8b03319 ↗
45. Designed graphite with an activated edge for fast-charging lithium-ion storage properties10.1039/D2CC01927B ↗
46. Stabilizing intermediate phases via efficient entrapment effects of layered VS4/SnS@C heterostructure for ultralong lifespan potassium‐ion batteries10.1002/adfm.202103802 ↗
47. L. Liu, L. Chen, X. Huang, X. Yang, W.S. Yoon, H.S. Lee, J. McBreen, Electrochemical and in situ synchrotron XRD studies on Al2O3-coated LiCoO2 cathode material, J. Electrochem. Soc. 151(9) A1344-A1351.10.1149/1.1772781 ↗
48. Understanding Co roles towards developing Co-free Ni-rich cathodes for rechargeable batteries10.1038/s41560-021-00776-y ↗
49. Mg-pillared LiCoO2: towards stable cycling at 4.6 V10.1002/anie.202014226 ↗
50. A Mg-doped high-nickel layered oxide cathode enabling safer, high-energy-density Li-ion batteries10.1021/acs.chemmater.8b03900 ↗
51. Li+-ion extraction/insertion of Ni-rich Li1+x(NiyCozMnz)wO2 (0.005<x<0.03;y:z=8:1,w≈1) electrodes: in situ XRD and Raman spectroscopy study10.1002/celc.201500160 ↗
52. Lattice strain estimation for CoAl2O4 nano particles using Williamson-Hall analysis10.1016/j.jallcom.2016.03.213 ↗
53. X-ray analysis of ZnO nanoparticles by Williamson–Hall and size–strain plot methods10.1016/j.solidstatesciences.2010.11.024 ↗
54. Phase transformation behavior and stability of LiNiO2 cathode material for Li-ion batteries obtained from in situ gas analysis and operando X-ray diffraction10.1002/cssc.201900032 ↗
55. Construction of homogeneously Al3+ doped Ni rich Ni-Co-Mn cathode with high stable cycling performance and storage stability via scalable continuous precipitation10.1016/j.electacta.2018.08.124 ↗
56. Sufficient utilization of zirconium ions to improve the structure and surface properties of nickel-rich cathode materials for lithium-ion batteries10.1002/cssc.201702451 ↗