Enhanced lifespan and rate capability of cobalt hexacyanoferrate in aqueous Na-ion batteries owing to particle size reduction
Source abstract
Abstract
Cobalt hexacyanoferrate (CoHCF) suffers from low rate capability and lifespan because of the dissolution and structural instability of Co during cycling. A smaller active material can relieve the stress caused by volume change during cycling and enable shorter transport pathways. Here, particle size reduction is performed by reducing the mixing time or citrate concentration in the coprecipitation reaction to improve the rate capability and lifespan of CoHCF. The reduced mixing time produces smaller particles with enlarged active sites, thus improving the capacity. Upon coprecipitation at a low citrate concentration, particle precipitation at reduced sizes is achieved by preferential nucleation versus growth. Although lowering the citrate concentration enlarges the external surface area, the reduced redox-active Fe degrades the capacity. All CoHCF samples with small sizes achieved enhance rate capability and stability. In particular, the sample synthesized with a short mixing time (0 h) achieve a specific capacity of 122 mAh g −1 with improved rate capability (79.4%) and stability (79.3%) over 500 cycles. Structural distortions are relaxed because of the shortened transport pathways and relieved distortion owing to particle size reduction. This study paves the approach for fast rechargeable and long-lasting aqueous Na-ion batteries using CoHCF electrodes.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced battery technologies research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Prussian blue nanocubes with an open framework structure coated with PEDOT as high‐capacity cathodes for lithium–sulfur batteries10.1002/adma.201700587 ↗
2. PBA composites and their derivatives in energy and environmental applications10.1016/j.ccr.2021.214260 ↗
3. Prussian blue analogs as battery materials10.1016/j.joule.2018.07.017 ↗
4. Chemical properties, structural properties, and energy storage applications of prussian blue analogues
5. Challenges of today for Na-based batteries of the future: from materials to cell metrics10.1016/j.jpowsour.2020.228872 ↗
6. Electrochemically formed 3D hierarchical thin films of cobalt–manganese (Co–Mn) hexacyanoferrate hybrids for electrochemical applications10.1016/j.jpowsour.2015.11.088 ↗
7. Accommodating diverse ions in prussian blue analogs frameworks for rechargeable batteries: the electrochemical redox reactions10.1016/j.nanoen.2020.105632 ↗
8. Prussian blue analogs for rechargeable batteries10.1016/j.isci.2018.04.008 ↗
9. Electrolyte regulation enhances the stability of prussian blue analogues in aqueous Na-ion storage10.1039/C8TA10860A ↗
10. Advanced metal–organic frameworks for aqueous sodium-ion rechargeable batteries10.1016/j.jechem.2020.07.024 ↗
11. Manganese–cobalt hexacyanoferrate cathodes for sodium-ion batteries10.1039/C5TA10571D ↗
12. Non-topotactic reactions enable high rate capability in Li-rich cathode materials10.1038/s41560-021-00817-6 ↗
13. A review of advanced and practical lithium battery materials10.1039/c0jm04225k ↗
14. Low defects potassium cobalt hexacyanoferrate as a superior cathode for aqueous potassium ion batteries10.1039/D0TA06979E ↗
15. Microporous/mesoporous cobalt hexacyanoferrate nanocubes for long-cycle life asymmetric supercapacitors10.1007/s10854-018-9628-5 ↗
16. Improved rate performance of prussian blue cathode materials for sodium ion batteries induced by ion-conductive solid-electrolyte interphase layer10.1016/j.jpowsour.2018.07.071 ↗
17. Surface passivation of NaxFe[Fe(CN)6] cathode to improve its electrochemical kinetics and stability in sodium-ion batteries10.1016/j.jpowsour.2019.227421 ↗
18. A promising cathode material of sodium iron–nickel hexacyanoferrate for sodium ion batteries10.1016/j.jpowsour.2014.10.196 ↗
19. Prussian blue analogue Co3(Co(CN)6)2 cuboids as an electrode material for high-performance supercapacitor
20. Engineering [Fe(CN)6]3− vacancy via free-chelating agents in prussian blue analogues on reduced graphene oxide for efficient oxygen evolution reaction10.1016/j.apsusc.2021.151620 ↗
21. Coprecipitation temperature effects of morphology‐controlled nickel hexacyanoferrate on the electrochemical performance in aqueous sodium‐ion batteries10.1002/cssc.202002339 ↗
22. Ultrafine prussian blue as a high‐rate and long‐life sodium‐ion battery cathode10.1002/ente.201900108 ↗
23. Enhanced stability and rate performance of zinc-doped cobalt hexacyanoferrate (CoZnHCF) by the limited crystal growth and reduced distortion10.1016/j.jechem.2022.01.034 ↗
24. Effect of Li4Ti5O12 particle size on the performance of lithium ion battery electrodes at high C-rates and low temperatures10.1021/jp509428c ↗
25. Lithium ion battery production10.1016/j.jct.2011.09.005 ↗
26. The powder metallurgy of n-type Bi2Te2. 55Se0. 45 thermoelectric material10.1007/BF00585476 ↗
27. Mechanical and microstructural investigations of tungsten and doped tungsten materials produced via powder injection molding10.1016/j.nme.2015.04.002 ↗
28. Effect of particle size on rate capability and cyclic stability of LiNi0.5Mn1.5O4 cathode for high-voltage lithium ion battery10.1007/s10008-014-2635-4 ↗
29. Enhanced high-rate capability and cycling stability of Na-stabilized layered Li1.2[Co0.13Ni0.13Mn0.54]O2 cathode material10.1039/c3ta12296d ↗
30. LiNi0.5Mn1.5O4 nanoparticles: synthesis with synergistic effect of polyvinylpyrrolidone and ethylene glycol and performance as cathode of lithium ion battery10.1016/j.jpowsour.2014.01.089 ↗
31. Nanomaterials for lithium ion batteries10.1016/S1748-0132(06)70114-1 ↗
32. Nanosize effect on high-rate Li-ion intercalation in LiCoO2 electrode10.1021/ja0681927 ↗
33. LiMn2O4 nanorods, nanothorn microspheres, and hollow nanospheres as enhanced cathode materials of lithium ion battery10.1021/jp800915f ↗
34. Monodispersed hierarchical Co3O4 spheres intertwined with carbon nanotubes for use as anode materials in sodium-ion batteries10.1039/C4TA02516D ↗
35. A Bi-doped Li3V2(PO4)3/C cathode material with an enhanced high-rate capacity and long cycle stability for lithium ion batteries10.1039/C5DT03225C ↗
36. Preparation of NiCuZn ferrite nanoparticles from chemical co-precipitation method and the magnetic properties after sintering10.1016/j.mseb.2004.04.009 ↗
37. Size-controlled fabrication of zein nano/microparticles by modified anti-solvent precipitation with/without sodium caseinate10.2147/IJN.S143733 ↗
38. Citrate-mediated synthesis of highly crystalline transition metal hexacyanoferrates and their Na ion storage properties10.1016/j.apsusc.2020.147336 ↗
39. High crystalline prussian white nanocubes as a promising cathode for sodium‐ion batteries10.1002/asia.201701715 ↗
40. Highly crystallized Na2CoFe(CN)6 with suppressed lattice defects as superior cathode material for sodium-ion batteries10.1021/acsami.5b12620 ↗
41. Kinetically controlled crystallization for synthesis of monodispersed coordination polymer nanocubes and their self‐assembly to periodic arrangements10.1002/chem.201203138 ↗
42. Prussian blue cathode materials for sodium‐ion batteries and other ion batteries
43. Paving the way toward highly efficient, high-energy potassium-ion batteries with ionic liquid electrolytes10.1021/acs.chemmater.0c01347 ↗
44. Air plasma activation of catalytic sites in a metal‐cyanide framework for efficient oxygen evolution reaction10.1002/aenm.201800085 ↗
45. Crystallite size control of prussian white analogues for nonaqueous potassium-ion batteries10.1021/acsenergylett.7b00179 ↗
46. Nanoarchitectonics: a new materials horizon for prussian blue and its analogues10.1246/bcsj.20180368 ↗
47. Thermal decomposition of prussian blue: isotopic labeling with Mössbauer-inactive Fe-5610.1016/0022-1902(74)80205-8 ↗
48. Microstructure and magnetic properties of Al-doped barium ferrite with sodium citrate as chelate agent10.1016/j.jmmm.2013.02.036 ↗
49. Truncated cobalt hexacyanoferrate nanocubes threaded by carbon nanotubes as a high-capacity and high-rate cathode material for dual-ion rechargeable aqueous batteries10.1016/j.jpowsour.2018.07.084 ↗
50. Opportunities in Na/K [hexacyanoferrate] frameworks for sustainable non-aqueous Na+/K+ batteries10.1039/D1SE01653A ↗
51. Synthesis of cobalt hexacyanoferrate nanoparticles and its hydrogen storage properties10.1016/j.ijhydene.2018.03.011 ↗
52. A superior low‐cost cathode for a Na‐ion battery10.1002/ange.201206854 ↗
53. The role of potassium ions in iron hexacyanoferrate as a cathode material for hybrid ion batteries10.1016/j.electacta.2016.10.062 ↗
54. The cathode choice for commercialization of sodium‐ion batteries: layered transition metal oxides versus prussian blue analogs
55. Selective control of composition in prussian white for enhanced material properties10.1021/acs.chemmater.9b01494 ↗
56. Pseudocapacitive contributions to electrochemical energy storage in TiO2 (anatase) nanoparticles10.1021/jp074464w ↗
57. Applications of voltammetry in lithium ion battery research10.33961/jecst.2019.00619 ↗
58. Particle size effects on temperature-dependent performance of LiCoO2 in lithium batteries10.1016/j.jpowsour.2005.10.076 ↗
59. Ionic-liquid-bifunctional wrapping of ultrafine SnO2 nanocrystals into N-doped graphene networks: high pseudocapacitive sodium storage and high-performance sodium-ion full cells10.1039/C9NR02542A ↗
60. Where do batteries end and supercapacitors begin?10.1126/science.1249625 ↗
61. Redox-electrolytes for non-flow electrochemical energy storage: a critical review and best practice10.1016/j.pmatsci.2018.10.005 ↗
62. The influence of the TiO2 particle size on the properties of Li4Ti5O12 anode material for lithium-ion battery10.1016/j.ceramint.2013.09.038 ↗
63. An advanced cathode for Na-ion batteries with high rate and excellent structural stability10.1039/c2cp44467d ↗
64. Impact of particle size of lithium manganese oxide on charge transfer resistance and contact resistance evaluated by electrochemical impedance analysis10.1016/j.electacta.2020.137292 ↗
65. A P2-Na0.67Co0.5Mn0.5O2 cathode material with excellent rate capability and cycling stability for sodium ion batteries10.1039/C6TA02845D ↗