journal article·2022-09

Microwave selective heating ultrafast construction of coral-like TiO2-MXene /graphene hybrid architectures for high-performance lithium-ion battery

Richao Niu, Rubing Han, Shaochun Tang, Junwu Zhu

Publisher page

Abstract

Graphene and MXenes, both as an emerging two-dimensional (2D) material, have become the predominant choice of electrochemical energy electrode materials owing to large surface-area-to-volume ratio and high electrical conductivity. However, severe restacking of such 2D ultrathin nanostructures largely lowers active surfaces and thus constrains their applications. Herein, we develop a microwave selective heating strategy that is highly efficient for ultrafast and scalable fabrication of novel coral-like porous MXene/graphene composite with high-quality graphene and well-dispersed TiO 2 nanocrystals. The MXene not only works as a source material but also serves as an excellent microwave absorbent, which leads to that reduction of graphene oxides can be completed within only 10 s under microwave irradiation at a much lower applied power of 200 W than the reported value of 1000 W. Especially the coral-like TiO 2-MXene/graphene material with large porosity delivers much higher capacity (356 mAh g −1 at 50 mA g −1) and much better rate capability than those for pure graphene, MXene and other MXene/graphene composites. That is attributed to the composites avoids restacking, assures structural stability, and provides high specific surface area and excellent electrons/ions conductivity. This work provides a new route to large-scale and low-cost production of high-performance electrode materials for lithium-ion battery.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Graphene research and applications · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Graphene-based composites for electrochemical energy storage10.1149/2.F08111if ↗
2. Graphene-based nanomaterials for energy storage10.1039/C0EE00295J ↗
3. A curved graphene nanoribbon with multi-edge structure and high intrinsic charge carrier mobility10.1021/jacs.0c07013 ↗
4. The role of graphene for electrochemical energy storage10.1038/nmat4170 ↗
5. Tuning the interlayer spacing of graphene laminate films for efficient pore utilization towards compact capacitive energy storage
6. Investigation of structural and electronic properties of graphene oxide10.1063/1.3607305 ↗
7. Charge transfer in ultrafine LDH nanosheets/graphene interface with superior capacitive energy storage performance10.1021/acsami.7b09373 ↗
8. Rapid amorphization in metastable CoSeO3·H2O nanosheets for ultrafast lithiation kinetics10.1021/acsnano.8b02352 ↗
9. Simultaneous incorporation of V and Mn element into polyanionic NASICON for high energy-density and long-lifespan Zn-ion storage
10. Chemistry with graphene and graphene oxide-challenges for synthetic chemists10.1002/anie.201402780 ↗
11. Microwave energy drives "On-Off-On" spin-switch behavior in nitrogen-doped graphene10.1002/adma.201902587 ↗
12. Microwave combustion for rapidly synthesizing pore-size-controllable porous graphene
13. Preparation of graphene by the rapid and mild thermal reduction of graphene oxide induced by microwaves10.1016/j.carbon.2009.11.037 ↗
14. Conductive graphene-melamine sponge prepared via microwave irradiation10.1021/acsami.8b06070 ↗
15. High-quality graphene via microwave reduction of solution-exfoliated graphene oxide10.1126/science.aah3398 ↗
16. Nitrogen-doped graphene nanosheets from bulk graphite using microwave irradiation10.1021/am405735c ↗
17. "Snowing" graphene using microwave ovens10.1002/adma.201803189 ↗
18. Scalable production of large single-layered graphenes by microwave exfoliation ‘in deionized water’10.1016/j.carbon.2018.04.014 ↗
19. Novel template-assisted microwave conversion of graphene oxide to graphene patterns: a reduction transfer mechanism10.1016/j.carbon.2019.03.081 ↗
20. Fabrication of porous SiCy (core)/C (shell) fibres using a hybrid precursor of polycarbosilane and pitch
21. The role of microwave absorption on formation of graphene from graphite oxide10.1016/j.carbon.2011.12.005 ↗
22. Metal-free catalytic ozonation on surface-engineered graphene: microwave reduction and heteroatom doping10.1016/j.cej.2018.08.134 ↗
23. Surface and heterointerface engineering of 2D MXenes and their nanocomposites: insights into electro- and photocatalysis10.1016/j.chempr.2018.08.037 ↗
24. 2D metal carbides and nitrides (MXenes) for energy storage10.1038/natrevmats.2016.98 ↗
25. 2D metal carbides and nitrides (MXenes) as high-performance electrode materials for lithium-based batteries10.1002/aenm.201801897 ↗
26. MXene-based porous and robust 2D/2D hybrid architectures with dispersed Li3Ti2(PO4)3 as superior anodes for lithium-ion battery10.1016/j.cej.2020.127049 ↗
27. Thickness-independent capacitance of vertically aligned liquid-crystalline MXenes10.1038/s41586-018-0109-z ↗
28. Two-dimensional nanocrystals produced by exfoliation of Ti3AlC210.1002/adma.201102306 ↗
29. Effect of synthesis on quality, electronic properties and environmental stability of individual monolayer Ti3C2 MXene flakes10.1002/aelm.201600255 ↗
30. 2D MXenes: electromagnetic property for microwave absorption and electromagnetic interference shielding10.1016/j.cej.2018.11.051 ↗
31. Hollow MXene spheres and 3D macroporous MXene frameworks for Na-ion storage10.1002/adma.201702410 ↗
32. Porous two-dimensional transition metal carbide (MXene) flakes for high-performance Li-ion storage10.1002/celc.201600059 ↗
33. Creating sandwich-like Ti3C2/TiO2/rGO as anode materials with high energy and power density for Li-ion hybrid capacitors10.1021/acssuschemeng.9b02849 ↗
34. 3D porous MXene (Ti3C2)/reduced graphene oxide hybrid films for advanced lithium storage10.1021/acsami.7b17386 ↗
35. Flexible MXene/graphene films for ultrafast supercapacitors with outstanding volumetric capacitance10.1002/adfm.201701264 ↗
36. Wasp nest-imitated assembly of elastic rGO/p-Ti3C2Tx MXene-cellulose nanofibers for high-performance sodium-ion batteries10.1016/j.carbon.2019.07.040 ↗
37. Ti3C2Tx MXene/graphene nanocomposites: synthesis and application in electrochemical energy storage10.1016/j.jallcom.2019.152403 ↗
38. Rapid and direct growth of bipyramid TiO2 from Ti3C2Tx MXene to prepare Ni/TiO2/C heterogeneous composites for high-performance microwave absorption10.1016/j.cej.2019.123095 ↗
39. HRTEM contrast analysis for structure characterization of graphene films grown by CVD10.1017/S1431927611008051 ↗
40. Measurement of the intrinsic strength of crystalline and polycrystalline graphene10.1038/ncomms3811 ↗
41. Anatase TiO2 single crystals with a large percentage of reactive facets10.1038/nature06964 ↗
42. Mesoporous TiO2 single crystals delivering enhanced mobility and optoelectronic device performance10.1038/nature11936 ↗
43. Photocatalytic and degradation mechanisms of anatase TiO2: a HRTEM study10.1039/c0cy00051e ↗
44. An overview of the applications of graphene-based materials in supercapacitors10.1002/smll.201102635 ↗
45. Large-scale production of graphene by microwave synthesis and rapid cooling10.1039/C0CC03520C ↗
46. Controllable nitrogen doping and specific surface from freestanding TiO2@carbon nanofibers as anodes for lithium ion battery10.1016/j.electacta.2018.12.012 ↗
47. In-situ construction of hierarchical accordion-like TiO2/Ti3C2 nanohybrid as anode material for lithium and sodium ion batteries10.1016/j.electacta.2018.03.118 ↗
48. Synergistic storage of lithium ions in defective anatase/rutile TiO2 for high-rate batteries10.1016/j.ensm.2019.07.025 ↗
49. N-doped TiO2/rGO hybrids as superior Li-ion battery anodes with enhanced Li-ions storage capacity10.1016/j.jallcom.2019.01.061 ↗