Accelerated ion conduction by co-grafting of poly(ethylene glycol) and nitrile-terminated ionic liquid on poly(arylene ether sulfone) for solid electrolyte membranes for lithium ion battery
Source abstract
Abstract
Solid polymeric electrolytes (SPE) are fabricated from poly(arylene ether sulfone)-co-poly(ethylene glycol)/nitrile terminated ionic liquid (PAES- co -PEG/ILCN) for lithium ion battery. Ionic liquid (IL) based on 1-butyl-1-methylpyrrollidum bis(fluoromethanesulfonyl) imide (Pyr-TFSI) is prepared and blended with 0.5 M lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) for promotion of the lithium (Li) ion transport in the membrane. Because of the compatibility difference, the synthesized membranes show the phase separation between PAES and PEG/IL components where PAES plays a role as mechanically robust matrix and PEG/IL acts as ion transport pathways. The PAES- co-(PEG70/ILCN30) membrane containing 70 wt% of 0.5 M LiTFSI/Pyr-TFSI illustrates high Li ion conductivity (0.72 × 10 −3 S cm −1 ) with the Li transport number value of 0.38 at room temperature. No thermal de-composition is observed up to 200 °C, maintaining the mechanical flexibility and rigidity with 1.25 MPa of tensile strength and 108% of elongation at fracture. The lithium ion phosphate (LiFePO 4/SPE/Li) cell test exhibits the discharge capacity value of 139.7 mAh g −1 and high stable cyclic performance up to 100th cycle at 0.1 C-rate.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (97)
Show source-provided references
1. Lithium-ion batteries. A look into the future10.1039/c1ee01388b ↗
2. Lithium-ion batteries: outlook on present, future, and hybridized technologies10.1039/C8TA10513H ↗
3. The lithium-ion battery: state of the art and future perspectives10.1016/j.rser.2018.03.002 ↗
4. The recycling of spent lithium-ion batteries: a review of current processes and technologies10.1007/s41918-018-0012-1 ↗
5. Electrolytes for Li-ion transport – review10.1016/j.ssi.2015.02.006 ↗
6. Tailor-made pore controlled poly (arylene ether ketone) membranes as a lithium-ion battery separator10.1016/j.jpowsour.2015.11.051 ↗
7. Progress of enhancing the safety of lithium ion battery from the electrolyte aspect10.1016/j.nanoen.2018.10.035 ↗
8. Rational design on separators and liquid electrolytes for safer lithium-ion batteries10.1016/j.jechem.2019.08.008 ↗
9. Dendrite-separator interactions in lithium-based batteries10.1016/j.jpowsour.2014.11.056 ↗
10. Solid polymer electrolytes: materials designing and all-solid-state battery applications: an overview10.1088/0022-3727/41/22/223001 ↗
11. Solid state electrolytes: overview of materials and applications during the last third of the Twentieth Century10.1016/S0378-7753(00)00436-5 ↗
12. Review of gel-type polymer electrolytes for lithium-ion batteries10.1016/S0378-7753(98)00193-1 ↗
13. Review on polymer-based composite electrolytes for lithium batteries10.3389/fchem.2019.00522 ↗
14. Tough and flexible, super ion-conductive electrolyte membranes for lithium-based secondary battery applications10.1002/adfm.202008586 ↗
15. Characterization of comb-shaped high molecular weight poly(oxyethylene) with tri(oxyethylene) side chains for a polymer solid electrolyte10.1016/S0013-4686(99)00377-1 ↗
16. Polystyrene-Al2O3 composite solid polymer electrolyte for lithium secondary battery10.1186/1556-276X-7-19 ↗
17. Preparation and characterization of the porous solid polymer electrolyte of PAN/PVA by phase inversion10.1007/s10800-015-0816-1 ↗
18. Poly(ethylene oxide)-co-Poly(propylene oxide)-based gel electrolyte with high ionic conductivity and mechanical integrity for lithium-ion batteries10.1021/am4019115 ↗
19. Preparation and electrochemical performance of polyphosphazene based salt-in-polymer electrolyte membranes for lithium ion batteries10.1016/j.jpowsour.2013.11.120 ↗
20. Ion conductive characteristics of cross-linked network polysiloxane-based solid polymer electrolytes10.1016/j.ssi.2004.04.007 ↗
21. Poly(ethylene oxide)-based electrolytes for lithium-ion batteries10.1039/C5TA03471J ↗
22. Polymer electrolytes for lithium-based batteries: advances and prospects
23. A promising PMHS/PEO blend polymer electrolyte for all-solid-state lithium ion batteries10.1039/C8DT02904K ↗
24. Influence of crystallinity on ion conductivity of PEO-based solid electrolytes for lithium batteries10.1007/s13233-010-0407-2 ↗
25. Photocured PEO-based solid polymer electrolyte and its application to lithium–polymer batteries10.1016/S0378-7753(00)00546-2 ↗
26. Poly(Ethylene oxide)-based electrolyte for solid-state-lithium-batteries with high voltage positive electrodes: evaluating the role of electrolyte oxidation in rapid cell failure10.1038/s41598-020-61373-9 ↗
27. Improving the conductivity of solid polymer electrolyte by grain reforming10.1186/s11671-020-03355-4 ↗
28. The effect of plasticizers on transport and electrochemical properties of PEO-based electrolytes for lithium rechargeable batteries10.1016/S0167-2738(02)00130-3 ↗
29. Polyethylene oxide-based composites as solid-state polymer electrolytes for lithium metal batteries: a mini review10.3389/fchem.2020.00640 ↗
30. Preparation of comb-like copolymers with amphiphilic poly(ethylene oxide)-b-polystyrene graft chains by combination of “graft from” and “graft onto” strategies10.1002/pola.23302 ↗
31. Poly(ethylene oxide)-based block copolymer electrolytes for lithium metal batteries10.1002/pi.5677 ↗
32. Effective optimization of high voltage solid-state lithium batteries by using poly(ethylene oxide)-based polymer electrolyte with semi-interpenetrating network10.1002/adfm.202006289 ↗
33. Cross-linking network based on Poly(ethylene oxide): solid polymer electrolyte for room temperature lithium battery10.1016/j.jpowsour.2019.02.090 ↗
34. Scalable plasticized polymer electrolytes reinforced with surface-modified sepiolite fillers – a feasibility study in lithium metal polymer batteries10.1016/j.jpowsour.2015.12.099 ↗
35. Composite poly(ethylene oxide) electrolytes plasticized by N-alkyl-N-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide for lithium batteries10.1002/cssc.201300105 ↗
36. High-modulus, high-conductivity nanostructured polymer electrolyte membranes via polymerization-induced phase separation10.1021/nl4034818 ↗
37. Crystalline phase formation, microstructure and mechanical properties of a lithium disilicate glass–ceramic10.1007/s10853-012-6738-y ↗
38. Solid electrolyte membrane prepared from poly(arylene ether sulfone)-g- poly(ethylene glycol) for lithium secondary battery10.1021/acsaem.8b02212 ↗
39. Free-volume and crystallinity in low molecular weight poly(ethylene oxide)10.1002/polb.21242 ↗
40. Novel zwitterionic poly(arylene ether sulfone)s as antifouling membrane material10.1016/j.memsci.2009.11.048 ↗
41. Solid electrolyte membranes prepared from poly(arylene ether sulfone)-g-poly(ethylene glycol) with various functional end groups for lithium-ion battery10.1016/j.memsci.2020.119023 ↗
42. Application of ionic liquids in hydrometallurgy10.3390/ijms150915320 ↗
43. Thermal stability and flammability of electrolytes for lithium-ion batteries10.1016/j.jpowsour.2011.01.068 ↗
44. The influence of the electrochemical and thermal stability of mixtures of ionic liquid and organic carbonate on the performance of high power lithium-ion batteries10.1016/j.electacta.2012.12.042 ↗
45. Solvation for ions and counterions: complementary relation between Ion−Counterion and Ion−Solvent interaction10.1021/jp014583q ↗
46. Ion transport and the true transference number in nonaqueous polyelectrolyte solutions for lithium ion batteries10.1021/acscentsci.9b00406 ↗
47. Enhancement of electrochemical performance and anti-oxidation stability by protection of lithium metal anode with Li+ conductive poly(arylene ether sulfone)-g-poly(ethylene glycol) layer for lithium metal battery10.1016/j.jpowsour.2021.229744 ↗
48. Solid electrolyte membranes prepared from poly(arylene ether ketone)-g-polyimidazolium copolymer integrated with ionic liquid for lithium secondary battery10.1016/j.jpowsour.2019.03.038 ↗
49. Negative effective Li transference numbers in Li salt/ionic liquid mixtures: does Li drift in the “Wrong” direction?10.1039/C7CP08580J ↗
50. Effect of salt concentration on ion clustering and transport in polymer solid electrolytes: a molecular dynamics study of PEO–LiTFSI10.1021/acs.chemmater.8b01955 ↗
51. Poly(arylene ether)-based single-ion conductors for lithium-ion batteries10.1021/acs.chemmater.5b03735 ↗
52. Modeling solid-electrolyte interphase (SEI) fracture: coupled mechanical/chemical degradation of the lithium ion battery10.1149/2.0841702jes ↗
53. Advanced concentration gradient cathode material with two-slope for high-energy and safe lithium batteries10.1002/adfm.201501430 ↗
54. Revisiting polymeric single lithium-ion conductors as an organic route for all-solid-state lithium ion and metal batteries10.1039/C8TA09056D ↗
55. Single-ion conducting polymer electrolytes for solid-state lithium–metal batteries: design, performance, and challenges10.1002/aenm.202003836 ↗
56. Dual-phase single-ion pathway interfaces for robust lithium metal in working batteries10.1002/adma.201808392 ↗
57. Single lithium-ion conducting polymer electrolytes based on a super-delocalized polyanion10.1002/anie.201509299 ↗
58. Novel functionalized ionic liquid with a sulfur atom in the aliphatic side chain of the pyrrolidinium cation10.1016/j.elecom.2015.12.009 ↗
59. Potential dependent capacitance of [EMIM][TFSI], [N1114][TFSI] and [PYR13][TFSI] ionic liquids on glassy carbon10.1039/C8CP04631J ↗
60. Influence of dielectric constant on ionic transport in polyether-based electrolytes10.1021/acsmacrolett.7b00810 ↗
61. Effect of nitrile-functionalization of imidazolium-based ionic liquids on their transport properties, both pure and mixed with lithium salts10.1007/s10953-014-0280-2 ↗
62. Progress in nitrile-based polymer electrolytes for high performance lithium batteries10.1039/C6TA02907H ↗
63. Advanced polymer electrolyte with enhanced electrochemical performance for lithium-ion batteries: effect of nitrile-functionalized ionic liquid10.1021/acsaem.8b01733 ↗
64. Understanding how nitriles stabilize electrolyte/electrode interface at high voltage10.1021/acs.jpclett.7b02734 ↗
65. Simultaneous establishment of high conductivity and mechanical stability via pore-filling of porous PTFE substrate with poly(ethylene glycol) and ionic liquid for lithium secondary battery10.1016/j.memsci.2020.119029 ↗
66. The Study of dielectric properties and conductivity relaxation of ion conducting chitosan: NaTf based solid electrolyte10.20964/2018.11.05 ↗
67. Effect of salt concentration on dielectric properties of Li-ion conducting blend polymer electrolytes10.1007/s10854-018-9905-3 ↗
68. Solid-state rigid-rod polymer composite electrolytes with nanocrystalline lithium ion pathways10.1038/s41563-021-00995-4 ↗
69. Cellulose-Derived flame-retardant solid polymer electrolyte for lithium-ion batteries10.1021/acssuschemeng.0c06309 ↗
70. A novel gel polymer electrolyte based on trimethylolpropane trimethylacrylate/ionic liquid via in situ thermal polymerization for lithium-ion batteries10.1016/j.electacta.2020.137706 ↗
71. Gel-polymer electrolytes plasticized with pyrrolidinium-based ionanofluid for lithium battery applications10.1007/s11581-020-03807-y ↗
72. Cation-assisted lithium-ion transport for high-performance PEO-based ternary solid polymer electrolytes10.1002/anie.202016716 ↗
73. A new strategy for enhancing the room temperature conductivity of solid-state electrolyte by using a polymeric ionic liquid10.1007/s11581-020-03638-x ↗
74. Enabling high lithium conductivity in polymerized ionic liquid block copolymer electrolytes10.1002/batt.201800104 ↗
75. Flexible quasi-solid-state composite electrolyte membrane derived from a metal-organic framework for lithium-metal batteries10.1002/celc.201902032 ↗
76. Nonflammable hybrid solid electrolyte membrane for a solid-state lithium battery compatible with conventional porous electrodes10.1016/j.memsci.2020.117820 ↗
77. Ionic liquid enhanced composite solid electrolyte for high-temperature/long-life/dendrite-free lithium metal batteries10.1016/j.memsci.2020.118424 ↗
78. Dielectric properties of sulfonated poly(ether ether ketone) (SPEEK) electrolytes with 1-ethyl-3-methylimidazolium tetrafluoroborate salt: ionic liquid-based conduction pathways10.1016/j.colsurfa.2020.125825 ↗
79. Enhancing ion transport: function of ionic liquid decorated MOFs in polymer electrolytes for all-solid-state lithium batteries10.1021/acsaem.9b02543 ↗
80. Highly conductive, flexible, and nonflammable double-network poly(ionic liquid)-based ionogel electrolyte for flexible lithium-ion batteries10.1021/acsami.1c06077 ↗
81. Decoupling the mechanical strength and ionic conductivity of an ionogel polymer electrolyte for realizing thermally stable lithium-ion batteries10.1016/j.memsci.2019.117549 ↗
82. A flexible composite solid electrolyte with a highly stable interphase for dendrite-free and durable all-solid-state lithium metal batteries10.1039/D0TA06697D ↗
83. Effect of zwitterionic salt on the electrochemical properties of a solid polymer electrolyte with high temperature stability for lithium ion batteries10.1016/j.electacta.2010.09.068 ↗
84. Effect of temperature on electrochemical performance of ionic liquid based polymer electrolyte with Li/LiFePO4 electrodes10.1016/j.ssi.2017.07.019 ↗
85. Performance of EMIMFSI ionic liquid based gel polymer electrolyte in rechargeable lithium metal batteries10.1016/j.jiec.2018.04.022 ↗
86. Ultrathin polymer electrolyte film prepared by in situ polymerization for lithium metal batteries, Mater
87. Thin laminar inorganic solid electrolyte with high ionic conductance towards high-performance all-solid-state lithium battery10.1016/j.cej.2021.131948 ↗
88. A solid-like dual-salt polymer electrolyte for Li-metal batteries capable of stable operation over an extended temperature range10.1016/j.ensm.2021.02.045 ↗
89. Composite polymer electrolytes with uniform distribution of ionic liquid-grafted ZIF-90 nanofillers for high-performance solid-state Li batteries10.1016/j.cej.2021.128733 ↗
90. PVDF-HFP-Based composite electrolyte membranes having high conductivity and lithium-ion transference number for lithium metal batteries
91. A flexible lithium-ion battery with quasi-solid gel electrolyte for storing pulsed energy generated by triboelectric nanogenerator10.1016/j.ensm.2017.11.013 ↗
92. MOF-derived ionic conductor enhancing polymer electrolytes with superior electrochemical performances for all solid lithium metal batteries10.1016/j.memsci.2019.117800 ↗
93. A novel solid PEO/LLTO-nanowires polymer composite electrolyte for solid-state lithium-ion battery10.1016/j.electacta.2018.10.005 ↗
94. Polymeric ionic liquid enhanced all-solid-state electrolyte membrane for high-performance lithium-ion batteries10.1016/j.electacta.2018.04.136 ↗
95. Cyclophosphazene-based hybrid polymer electrolytes obtained via epoxy–amine reaction for high-performance all-solid-state lithium-ion batteries10.1039/C9TA05028K ↗
96. Ambient temperature solid-state Li-battery based on high-salt-concentrated solid polymeric electrolyte10.1016/j.jpowsour.2018.05.050 ↗
97. One-step preparation of poly(ionic liquid)-based flexible electrolytes by in-situ polymerization for dendrite-free lithium ion batteries10.1016/j.cej.2019.122062 ↗