Issues regarding bipolar plate-gas diffusion layer interfacial contact resistance determination
Source abstract
Abstract
The interfacial contact resistance (ICRBPP-GDL) between the bipolar plates (BPPs) and gas diffusion layers (GDLs) plays a major role in proton exchange membrane-fuel cells (PEMFCs) efficiency. Accordingly, materials selection based on ex-situ ICRBPP-GDL determination is a useful tool, provided accurate through-plane resistance measurements are ensured; in this sense, an experimental study was conducted. To this end, two square-shaped samples of equal areas, one from stainless steel (a low cost BPP material), and one from carbon paper (a widely used GDL material) were placed (both separately, and stacked) between two planar Cu electrodes, and the through-plane resistance of the as-formed measuring cell was determined at various applied clamping pressures (p). It was found that although falling into the same order of magnitude (tens of mΩ cm2), the results extracted from these measurements as ICRBPP-GDL (p) are affected by the non-uniformity of the current flow through the measuring cell, and also by the position of the voltage pick-up contacts. It was concluded that if reasonably uniform path is ensured for the biasing current by splitting this into four equal currents, and if central points are used for voltage pick-up, realistic results are expected.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells10.1016/S0378-7753(03)00023-5 ↗
2. Measurement and prediction of electrical contact resistance between gas diffusion layers and bipolar plate for applications to PEM fuel cells10.1115/1.1782917 ↗
3. Measuring the through-plane electrical resistivity of bipolar plates (apparatus and methods)10.1016/j.jpowsour.2004.11.062 ↗
4. Effect of clamping pressure on the performance of a PEM fuel cell10.1016/j.jpowsour.2007.01.015 ↗
5. Carbon-coated stainless steel as PEFC bipolar plate material10.1016/j.jpowsour.2007.08.096 ↗
6. Electrical contact resistance between stainless steel bipolar plate and carbon felt in PEFC: a comprehensive study10.1016/j.ijhydene.2009.01.089 ↗
7. Effect of surface roughness of composite bipolar plates on the contact resistance of a proton exchange membrane fuel cell10.1016/j.jpowsour.2008.11.063 ↗
8. Challenges associated with measuring the intrinsic electrical conductivity10.1002/fuce.201400125 ↗
9. Requirements and testing methods for surfaces of metallic bipolar plates for low-temperature PEM fuel cells10.1088/1757-899X/181/1/012018 ↗
10. Surface coating and texturing on stainless-steel plates to decrease the contact resistance by using screen printing10.1016/j.ijhydene.2017.06.154 ↗
11. Contact resistance prediction of proton exchange membrane fuel cell considering fabrication characteristics of metallic bipolar plates10.1016/j.enconman.2018.05.069 ↗
12. Electrical contact resistance between anode and cathode bipolar plates with respect to surface conditions10.1016/j.compstruct.2018.01.067 ↗
13. Electrical resistance and microstructure of typical gas diffusion layers for proton exchange membrane fuel cell under compression10.1016/j.apenergy.2018.09.117 ↗
14. Measuring in situ interfacial contact resistance in a proton exchange membrane fuel cell10.1149/2.1511912jes ↗
15. Improved polymer electrolyte fuel cell performance with membrane electrode assemblies using modified metallic plate: comparative study on impact of various coatings10.1016/j.ijhydene.2019.05.243 ↗
16. Corrosion resistant quaternary Al-Cr-Mo-N coating on type 316L stainless steel bipolar plates for proton exchange membrane fuel cells10.1016/j.ijhydene.2019.11.119 ↗
17. Coated stainless steel as bipolar plate material for anion exchange membrane fuel cells (AEMFCs)10.1016/j.ijhydene.2019.04.122 ↗
18. Bipolar plate materials for solid polymer fuel cells10.1023/A:1003831406406 ↗
19. The effect of pH and halides on the corrosion process of stainless steel bipolar plates for proton exchange membrane fuel cells10.1016/j.ijhydene.2012.09.021 ↗
20. Stainless steel bipolar plates for proton exchange membrane fuel cells: Materials, flow channel design and forming processes
21. Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells10.1016/j.jpowsour.2012.06.099 ↗
22. Sadeghifar · Energy Convers. Manag. · 2017 · 154 · 19110.1016/j.enconman.2017.10.060 ↗
23. The contact resistance between gas diffusion layers and bipolar plates as they are assembled in proton exchange membrane fuel cells10.1016/j.renene.2012.10.025 ↗
24. An investigation of the typical corrosion parameters used to test polymer electrolyte fuel cell bipolar plate coatings, with titanium nitride coated stainless steel as a case study10.1016/j.jpowsour.2015.03.111 ↗
25. An ultralight-weight polymer electrolyte fuel cell10.1016/j.jpowsour.2020.229291 ↗
26. Bipolar plate development with additive manufacturing and protective coating for durable and high-efficiency hydrogen production10.1016/j.jpowsour.2018.06.078 ↗
27. Ex-situ evaluation of nanometer range gold coating on stainless steel substrate for automotive polymer electrolyte membrane fuel cell bipolar plate10.1016/j.jpowsour.2009.09.022 ↗
28. An electrochemical treatment to improve corrosion and contact resistance of stainless steel bipolar plates used in polymer electrolyte fuel cells10.1016/j.jpowsour.2013.07.041 ↗