High power density & energy density Li-ion battery with aluminum foam enhanced electrode: Fabrication and simulation
Source abstract
Abstract
Compared with aluminum foil (Al foil), the three-dimensional (3D) aluminum foam (Al foam) has the characteristics of 3D interconnected metal wires and through-hole structure with high specific surface area, which exhibits great potential for application in high-power energy storage devices. In this work, 3D Al foam-based and Al foil-based cathode sheets were fabricated and assembled into pouch cells. In-situ XRD was employed to analyze the electrochemical reaction behavior of the two types of porous electrodes. The 3D Al foam-based cathode demonstrated faster electron transfer and lithium-ion diffusion as compared to the Al foil-based electrode, which is helpful for a uniform electrochemical reaction and decreases the electrochemical polarization. Electrochemical simulations and porous electrode models were built to understand these phenomena. The Al foam-based LiFePO 4 batteries exhibit much better power and energy performance than Al foil-based LiFePO 4 battery. The power density of the Al foam pouch cells is 7.0–7.7 kW/L when the energy density is 230–367 Wh/L, which is the highest power and energy density among reported Al foam-based devices. The new findings open up opportunities for the development of high-power and high-energy-density commercial batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Action 7 of the SET Plan on “Batteries for e-mobility and stationary storage”., (n.d.). https://setis.ec.europa.eu/system/files/2021-05/set_plan_batteries_implementation_plan.pdf.
2. 2019
3. The nanoscale circuitry of battery electrodes
4. Thick electrode batteries: principles, opportunities, and challenges10.1002/aenm.201901457 ↗
5. Understanding thickness and porosity effects on the electrochemical performance of LiNi0.6Co0.2Mn0.2O2-based cathodes for high energy Li-ion batteries10.1016/j.jpowsour.2019.02.060 ↗
6. Thick electrodes for Li-ion batteries: a model based analysis10.1016/j.jpowsour.2016.09.143 ↗
7. Understanding limiting factors in thick electrode performance as applied to high energy density Li-ion batteries10.1007/s10800-017-1047-4 ↗
8. Cost modeling of lithium‐ion battery cells for automotive applications10.1002/ese3.47 ↗
9. Conductive cellulose nanofiber enabled thick electrode for compact and flexible energy storage devices10.1002/aenm.201802398 ↗
10. Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries10.1038/nenergy.2016.97 ↗
11. Coral-like directional porosity lithium ion battery cathodes by ice templating10.1039/C8TA05049J ↗
12. 3D printing of interdigitated Li‐Ion microbattery architectures10.1002/adma.201301036 ↗
13. 3D printing nanocomposite gel-based thick electrode enabling both high areal capacity and rate performance for lithium-ion battery10.1016/j.cej.2019.122641 ↗
14. Wood-inspired high-performance ultrathick bulk battery electrodes10.1002/adma.201706745 ↗
15. Calendering effect on the electrochemical performances of the thick Li-ion battery electrodes using a three dimensional Ni alloy foam current collector10.1016/j.electacta.2015.04.119 ↗
16. Influence of conductive carbon content using a three-dimensional foam-type current collector for lithium ion battery10.1149/2.0581614jes ↗
17. In situ constructing lithiophilic NiFx nanosheets on Ni foam current collector for stable lithium metal anode via a succinct fluorination strategy10.1016/j.cej.2020.125122 ↗
18. Ultra-thick Li-ion battery electrodes using different cell size of metal foam current collectors10.1039/C4RA14485F ↗
19. 3D-cathode design with foam-like aluminum current collector for high energy density lithium-ion batteries10.1016/j.est.2018.01.006 ↗
20. Characterization of the calendering process for compaction of electrodes for lithium-ion batteries10.1016/j.jmatprotec.2017.05.031 ↗
21. Intensive powder mixing for dry dispersing of carbon black and its relevance for lithium-ion battery cathodes10.1016/j.powtec.2016.04.011 ↗
22. The potential for the creation of a high areal capacity lithium-sulfur battery using a metal foam current collector10.1149/2.0381701jes ↗
23. Quanxing · 2005
24. Quanxing · 2007
25. Deconinck · 2012
26. High energy and high power density supercapacitor with 3D Al foam-based thick graphene electrode: fabrication and simulation10.1016/j.ensm.2020.07.020 ↗
27. Qian · 2019