Power generation from a symmetric flat-tube solid oxide fuel cell using direct internal dry-reforming of methane
Source abstract
Abstract
Abstract Direct conversion of methane to electricity in solid oxide fuel cells is challenging, especially for large-scale cells/stacks, due to coking on Ni-based anodes, which may cause an inhomogeneous temperature and/or stress distribution. In this work, we investigated for the first time direct internal dry reforming of CH4 for power generation using a flat-tube SOFC (FT-SOFC) with symmetric double-sided cathodes with an active area of 70 cm2, and studied the effects of CO2:CH4 ratio, temperature, and current density on the performance and durability of the cell. Our results indicate that the thick anode support and inner channels of the FT-SOFC function as an efficient micro-reactor for reforming of methane, resulting in high conversion rates of methane, and thus a durable cell operation for 500 h in CO2/CH4 = 2 with a constant current density of 0.2 A cm−2 at 750 °C. Ni/YSZ catalysts granules placed in the internal fuel channels can further alleviate coking and improve the durability of cells. The unique cell configuration of FT-SOFC makes possible the direct utilization of methane for power generation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Fuel flexibility in power generation by solid oxide fuel cells10.1016/S0167-2738(02)00351-X ↗
2. Performance and environmental study of a biogas-fuelled solid oxide fuel cell with different reforming approaches10.1016/j.energy.2017.06.125 ↗
3. A robust fuel cell operated on nearly dry methane at 500 °C enabled by synergistic thermal catalysis and electrocatalysis10.1038/s41560-018-0262-5 ↗
4. Solid oxide fuel cell (SOFC) performance evaluation, fault diagnosis and health control: a review10.1016/j.jpowsour.2021.230058 ↗
5. An octane-fueled solid oxide fuel cell10.1126/science.1109213 ↗
6. Recent advances in the development of anode materials for solid oxide fuel cells utilizing liquid oxygenated hydrocarbon fuels: a mini review10.1002/ente.201700738 ↗
7. Cannock landfill gas powering a small tubular solid oxide fuel cell — a case study10.1016/S0378-7753(99)00417-6 ↗
8. Durability of anode supported Solid Oxides Fuel Cells (SOFC) under direct dry-reforming of methane10.1016/j.cej.2013.01.003 ↗
9. Experimental investigation of direct internal reforming of biogas in solid oxide fuel cells10.1016/j.ijhydene.2009.12.146 ↗
10. Catalytic and electrocatalytic behavior of Ni-based cermet anodes under internal dry reforming of CH4+CO2 mixtures in SOFCs10.1016/j.ssi.2006.03.040 ↗
11. Internal reforming SOFC running on biogas10.1016/j.ijhydene.2010.05.064 ↗
12. Performance of a solid oxide fuel cell short-stack with biogas feeding10.1016/j.apenergy.2014.03.040 ↗
13. Stability and coking of direct-methane solid oxide fuel cells: effect of CO2 and air additions10.1016/j.jpowsour.2009.05.032 ↗
14. Equilibria in fuel cell gases. II. The C-H-O ternary diagrams10.1149/1.1577338 ↗
15. SOFC running on biogas: identification and experimental validation of “safe”
16. Electrochemical properties and thermal neutral state of solid oxide fuel cells with direct internal reforming of methane10.1016/j.ijhydene.2019.03.048 ↗
17. Direct operation of solid oxide fuel cells with methane fuel10.1016/j.ssi.2005.05.008 ↗
18. Exsolution of Ni nanoparticles from A-site-deficient layered double perovskites for dry reforming of methane and as an anode material for a solid oxide fuel cell10.1021/acsami.1c08158 ↗
19. Enhanced sulfur and coking tolerance of a mixed ion conductor for SOFCs: BaZr0.1Ce0.7Y0.2-xYbxO3-δ10.1126/science.1174811 ↗
20. Enhanced electrochemical performance, water storage capability and coking resistance of a Ni+BaZr0.1Ce0.7Y0.1Yb0.1O3-δanode for solid oxide fuel cells operating on ethanol10.1016/j.ces.2014.12.011 ↗
21. Nickel -Based Anode with water storage capability to mitigate carbon deposition for direct ethanol solid oxide fuel cells10.1002/cssc.201301341 ↗
22. Study of a SOFC with a bimetallic Cu–Co–ceria anode directly fuelled with simulated biogas mixtures10.1016/j.ijhydene.2013.06.142 ↗
23. Direct oxidation of hydrocarbons in a solid-oxide fuel cell10.1038/35005040 ↗
24. Anodes for direct oxidation of dry hydrocarbons in a solid-oxide fuel cell10.1002/1521-4095(200010)12:19<1465::AID-ADMA1465>3.0.CO;2-9 ↗
25. A comparison of Cu-Ceria-SDC and Au-Ceria-SDC composites for SOFC anodes10.1149/1.1608003 ↗
26. Synthesis of Co–Ni and Cu–Ni based-catalysts for dry reforming of methane as potential components for SOFC anodes10.1016/j.ceramint.2021.08.220 ↗
27. Biomaterials by freeze casting10.1098/rsta.2010.0014 ↗
28. Double perovskites as anode materials for solid-oxide fuel cells10.1126/science.1125877 ↗
29. A high-performing sulfur-tolerant and redox-stable layered perovskite anode for direct hydrocarbon solid oxide fuel cells10.1038/srep18129 ↗
30. Combustion-synthesized Ru–Al2O3 composites as anode catalyst layer of a solid oxide fuel cell operating on methane10.1016/j.ijhydene.2010.09.048 ↗
31. Enhanced electrochemical performance and durability for direct CH4–CO2 solid oxide fuel cells with an on-cell reforming layer10.1016/j.ijhydene.2021.04.107 ↗
32. Clean and stable conversion of oxygen-bearing low-concentration coal mine gas by solid oxide fuel cells with an additional reforming layer10.1016/j.jpowsour.2021.230208 ↗
33. Biogas to syngas: flexible on-cell micro-reformer and NiSn bimetallic nanoparticle implanted solid oxide fuel cells for efficient energy conversion10.1039/C6TA00532B ↗
34. Lithium and lanthanum promoted Ni-Al2O3 as an active and highly coking resistant catalyst layer for solid-oxide fuel cells operating on methane10.1016/j.jpowsour.2010.07.033 ↗
35. Anode-supported planar solid oxide fuel cells based on double-sided cathodes
36. Reliability of CO2 electrolysis by solid oxide electrolysis cells with a flat tube based on a composite double-sided air electrode10.1016/j.compositesb.2019.02.012 ↗
37. Performance and long-term durability of direct-methane flat-tube solid oxide fuel cells with symmetric double-sided cathodes10.1016/j.ijhydene.2019.09.126 ↗
38. Wanbing Guan Study on the long-term discharge and redox stability of symmetric flat-tube solid oxide fuel cells10.1016/j.ijhydene.2020.12.227 ↗
39. Optimization of dry reforming of methane over Ni/YSZ anodes for solid oxide fuel cells10.1016/j.jpowsour.2013.06.088 ↗
40. Fabrication of a porous bioactive glass–ceramic using room-temperature freeze casting10.1111/j.1551-2916.2006.01092.x ↗
41. Comparison between internal steam and CO2 reforming of methane for Ni-YSZ and Ni-ScSZ SOFC anodes10.1149/1.3435320 ↗
42. Improving the stability of direct-methane solid oxide fuel cells using anode barrier layers10.1016/j.jpowsour.2005.09.060 ↗