journal article·2021-10

Creating new surface-exchange pathways on the misfit Ca-cobaltite electrode by the addition of an active interlayer

Allan J.M. Araújo, Francisco J.A. Loureiro, Laura I.V. Holz, Vanessa C.D. Graça, João P.F. Grilo, Daniel A. Macedo, Carlos A. Paskocimas, Duncan P. Fagg

Publisher page

Abstract

Abstract Among the most promising electrode choices for solid oxide cells, the misfit calcium cobaltite, with the nominal composition [Ca2CoO3-δ]0.62[CoO2] (C349), is gaining special relevance due to its ability to provide good performance in oxidizing conditions, and also for possessing a thermal expansion coefficient similar to that of the standard electrolytes. In this work, we investigate the electrochemical behavior of the misfit C349 with the addition of an active interlayer made of Ce0.8Pr0.2O2-δ (CPO, + 2 mol% Co), compared to the electrode mechanism of an interlayer-free C349 electrode. A combination of three different approaches for the distribution function of relaxation times analysis permits a careful analysis on the characteristic time constants associated with the surface-exchange processes, revealing the existence of parallel reaction paths at higher temperatures, where the pathway through the C349 electrode may take on an important role. Conversely, at lower temperatures, due to the poor ionic conductivity of the C349 compound, the interlayer pathway may become predominant, since the CPO + Co provides much higher ionic conductivity than the C349. These results highlight the competition between an increased electroactive area and the role of the surface-exchange on the CPO + Co interface, where the latter becomes more relevant on decreasing temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Materials for reversible solid oxide cells10.1016/j.coelec.2020.03.014 ↗
2. High-temperature electrical transport and thermoelectric power of partially substituted Ca3Co4O9-based ceramics10.1111/j.1551-2916.2006.01370.x ↗
3. Ca3Co4O9-δ: a thermoelectric material for SOFC cathode10.1021/cm902040v ↗
4. Oxygen transport kinetics of the misfit layered oxide Ca3Co4O9+δ10.1039/C4TA02198C ↗
5. Loureiro · 2019
6. Boosting the oxygen reduction reaction of the misfit [Ca2CoO3-δ]q[CoO2] (C349) by the addition of praseodymium oxide10.1016/j.jallcom.2019.02.209 ↗
7. Understanding the cathodic polarisation behaviour of the misfit [Ca2CoO3-δ]q[CoO2] (C349) as oxygen electrode for IT-SOFC10.1016/j.electacta.2018.08.018 ↗
8. Electrochemical assessment of novel misfit Ca-cobaltite-based composite SOFC cathodes synthesized by solution blow spinning10.1016/j.jeurceramsoc.2018.01.044 ↗
9. Polarisation mechanism of the misfit Ca-cobaltite electrode for reversible solid oxide cells10.1016/j.electacta.2021.137928 ↗
10. Preparation and evaluation of Ca3-xBixCo4O9-δ (0 < x ≤ 0.5) as novel cathodes for intermediate temperature-solid oxide fuel cells10.1016/j.ijhydene.2012.02.132 ↗
11. Effects of transition metal ion dopants on the performance of Ca2.9Bi0.1Co4O9-δ cathode10.1016/j.jallcom.2012.10.043 ↗
12. Proteic sol-gel synthesis of copper doped misfit Ca-cobaltites with potential SOFC application10.1016/j.matchemphys.2016.11.063 ↗
13. Electrostatic spray deposited Ca3Co4O9+δ and Ca3Co4O9+δ/Ce0.9Gd0.1O1.95 cathodes for SOFC: a comparative impedance analysis study10.1016/j.electacta.2020.137142 ↗
14. Ca3Co4O9+δ, a growing potential SOFC cathode material: impact of the layer composition and thickness on the electrochemical properties10.1016/j.ssi.2016.06.001 ↗
15. Composite of calcium cobaltite with praseodymium-doped ceria: a promising new oxygen electrode for solid oxide cells10.1016/j.ijhydene.2021.06.049 ↗
16. Transition from perovskite to misfit-layered structure materials: a highly oxygen deficient and stable oxygen electrode catalyst10.1039/D0EE02799E ↗
17. Functionality of an oxygen Ca3Co4O9+δ electrode for reversible solid oxide electrochemical cells based on proton-conducting electrolytes10.1016/j.jpowsour.2019.226996 ↗
18. Assessment of prospective cathodes based on (1-x)Ca3Co4O9+δ-xBaCe0.5Zr0.3Y0.1Yb0.1O3-δ composites for protonic ceramic electrochemical cells10.1007/s10008-020-04606-1 ↗
19. Growth of Ca3Co4O9+δ thin film on sapphire substrate and CGO dense pellet by pulsed laser deposition. Structural, microstructural, surface and electrochemical characterizations10.1016/j.ssi.2014.10.026 ↗
20. Enhanced intermediate-temperature electrochemical performance of air electrodes for solid oxide cells with spray-pyrolyzed active layers10.1021/acsami.9b22966 ↗
21. Increased performance by use of a mixed conducting buffer layer, terbia-doped ceria, for Nd2NiO4+δ SOFC/SOEC oxygen electrodes10.1016/j.ijhydene.2019.10.008 ↗
22. Enhancing electrochemical performance by control of transport properties in buffer layers – solid oxide fuel/electrolyser cells10.1039/C5CP00778J ↗
23. Comparative study of fluorite-type ceria-based Ce1-xLnxO2-δ (Ln = Tb, Gd, and Pr) mixed ionic electronic conductors densified at low temperatures10.1007/s10853-016-0256-2 ↗
24. Transport properties of fluorite-type Ce0.8Pr0.2O2-δ: optimization via the use of cobalt oxide sintering Aid10.1021/cm802708a ↗
25. Proteic sol–gel synthesis of Gd-doped ceria: a comprehensive structural, chemical, microstructural and electrical analysis10.1007/s10853-020-05173-6 ↗
26. Sintering and properties of nanosized ceria solid solutions10.1016/S0167-2738(00)00437-9 ↗
27. Transport in ceria electrolytes modified with sintering aids: effects on oxygen reduction kinetics10.1007/s10008-004-0509-x ↗
28. Oxygen permeability of mixed-conducting Ce0.8Tb0.2O2-δ membranes: effects of ceramic microstructure and sintering temperature10.1016/j.memsci.2014.10.025 ↗
29. Fourier transform distribution function of relaxation times; application and limitations10.1016/j.electacta.2014.12.059 ↗
30. Derivation of a distribution function of relaxation times for the (fractal) finite length Warburg10.1016/j.electacta.2017.08.154 ↗
31. Interpretation of the Gerischer impedance in solid state ionics10.1016/S0167-2738(02)00185-6 ↗
32. Electrode kinetics of porous mixed‐conducting oxygen electrodes10.1149/1.1837252 ↗
33. Mechanism and kinetics of oxygen reduction on porous La1-xSrxCoO3-δ electrodes10.1016/S0167-2738(98)00179-9 ↗
34. Influence of configuration and microstructure on performance of La2NiO4+δ intermediate-temperature solid oxide fuel cells cathodes10.1016/j.jpowsour.2013.03.192 ↗
35. Pr2O2SO4–La0.6Sr0.4Co0.2Fe0.8O3-δ: a new category of composite cathode for intermediate temperature-solid oxide fuel cells10.1039/C4TA06640E ↗
36. Electrochemical investigation of oxygen reduction reaction on La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes deposited by Electrostatic Spray Deposition10.1016/j.jpowsour.2011.09.049 ↗
37. Electrode properties of Ln2NiO4+δ (ln = La, Nd, Pr):AC impedance and DC polarization studies10.1149/1.2207059 ↗
38. La0.99Co0.4Ni0.6O3−δ–Ce0.8Gd0.2O1.95 as composite cathode for solid oxide fuel cells10.1016/j.jpowsour.2010.11.065 ↗
39. Analysis and application of distribution of relaxation times in solid state ionics10.1016/j.ssi.2016.10.009 ↗
40. Use of a distribution function of relaxation times (DFRT) in impedance analysis of SOFC electrodes10.1016/j.ssi.2017.11.021 ↗
41. Analysis of electrochemical impedance spectroscopy data using the distribution of relaxation times: a bayesian and hierarchical bayesian approach10.1016/j.electacta.2015.03.123 ↗
42. Equivalent circuit approximation to porous mixed‐conducting oxygen electrodes in solid‐state cells10.1149/1.1838227 ↗
43. Factors governing oxygen reduction in solid oxide fuel cell cathodes10.1021/cr020724o ↗
44. Exceptional power density and stability at intermediate temperatures in protonic ceramic fuel cells10.1038/s41560-017-0085-9 ↗