journal article·2021-09

Measuring the reversible heat of lithium-ion cells via current pulses for modeling of temperature dynamics

B. Bedürftig, M. Oldenburger, T. Hüfner, E. Richter, R.D. Braatz, A. Gruhle, R. Findeisen

Publisher page

Abstract

Abstract This article introduces a novel calorimetric measurement method, namely the ‘Double Pulse Method’, to measure reversible heat in lithium-ion battery cells. In Li-ion cells, reversible heat has a material-dependent characteristic as it is closely related to both entropy change and the temperature dependence of the open circuit voltage. The proposed method measures reversible heat as a highly resolved function of the cell’s state of charge. The determination of reversible heat is based on the evaluation of the temperature difference generated by two current pulses of opposite polarity. Unlike established potentiometric methods, the Double Pulse Method is simple to set up, fast, and cost-effective. The accuracy of the Double Pulse Method is demonstrated for an automotive lithium iron phosphate (LFP) cell, and the entropy changes are compared with measurements of the same cell using the established potentiometric method. Simulation results indicate that the cell temperature is more accurate when determined by the reversible heat measurement obtained by the Double Pulse Method than from the potentiometric method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Review on battery thermal management system for electric vehicles10.1016/j.applthermaleng.2018.12.020 ↗
2. Review–dynamic models of Li-ion batteries for diagnosis and operation: A review and perspective10.1149/2.1061814jes ↗
3. Electrochemical model based observer design for a lithium-ion battery10.1109/TCST.2011.2178604 ↗
4. A novel and precise measuring method for the entropy of lithium-ion cells: ΔS via electrothermal impedance spectroscopy10.1016/j.electacta.2014.05.153 ↗
5. Advanced electrodes for high power Li-ion batteries10.3390/ma6031028 ↗
6. Electrochemical-calorimetric studies of lithium-ion cells10.1149/1.1838509 ↗
7. Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery10.1016/j.jpowsour.2009.10.105 ↗
8. The entropy and enthalpy of lithium intercalation into graphite10.1016/S0378-7753(03)00285-4 ↗
9. Effect of entropy change of lithium intercalation in cathodes and anodes on Li-ion battery thermal management10.1016/j.jpowsour.2009.11.103 ↗
10. Fast and accurate measurement of entropy profiles of commercial lithium-ion cells10.1016/j.electacta.2015.01.191 ↗
11. Heat generation in lithium-ion batteries with different nominal capacities and chemistries10.1016/j.applthermaleng.2017.07.126 ↗
12. Thermal characterization of a high-power lithium-ion battery: Potentiometric and calorimetric measurement of entropy changes10.1016/j.energy.2013.09.028 ↗
13. Entropy change effects on the thermal behavior of a LiFePO4/graphite lithium-ion cell at different states of charge10.1016/j.jpowsour.2013.05.199 ↗
14. Effect of overcharge on entropy and enthalpy of lithium-ion batteries10.1016/j.electacta.2012.11.057 ↗
15. Systematic aging of commercial LiFePO4 | graphite cylindrical cells including a theory explaining rise of capacity during aging10.1016/j.jpowsour.2017.01.133 ↗
16. Lithium flow between active area and overhang of graphite anodes as a function of temperature and overhang geometry10.1016/j.est.2019.100790 ↗
17. An improved calorimetric method for characterizations of the specific heat and the heat generation rate in a prismatic lithium ion battery cell10.1016/j.enconman.2018.11.030 ↗
18. Thermal behavior of small lithium-ion battery during rapid charge and discharge cycles10.1016/j.jpowsour.2005.08.049 ↗
19. Investigation of the low frequency Warburg impedance of Li-ion cells by frequency domain measurements10.1016/j.est.2018.11.029 ↗
20. Fundamentals of battery dynamics10.1016/j.jpowsour.2005.10.041 ↗
21. Determination of the entropy change profile of a cylindrical lithium-ion battery by heat flux measurements10.1016/j.jpowsour.2016.08.130 ↗
22. A general energy balance for battery systems10.1149/1.2113792 ↗
23. Modelling Ni-mH battery using Cauer and Foster structures10.1016/j.jpowsour.2005.10.018 ↗
24. Thermal properties of lithium-ion battery and components10.1149/1.1391704 ↗
25. Experimental study on the influence of temperature and state-of-charge on the thermophysical properties of an LFP pouch cell10.1016/j.jpowsour.2015.05.084 ↗
26. Confidence limits, error bars and method comparison in molecular modeling. Part 1: The calculation of confidence intervals10.1007/s10822-014-9753-z ↗
27. Model of lithium intercalation into graphite by potentiometric analysis with equilibrium and entropy change curves of graphite electrode10.1149/2.1251802jes ↗
28. Analysis of low frequency impedance hysteresis of Li-ion cells by time- and frequency domain measurements and its relation to the OCV hysteresis10.1016/j.est.2019.101000 ↗
29. Hysteresis and current dependence of the thickness change of lithium-ion cells with graphite anode10.1016/j.est.2017.04.006 ↗
30. A new approach to measure the non-linear Butler–Volmer behavior of electrochemical systems in the time domain10.1016/j.est.2017.09.002 ↗
31. Impedance-based non-linear dynamic battery modeling for automotive applications10.1016/S0378-7753(02)00558-X ↗