Neutron imaging of operando proton exchange membrane fuel cell with novel membrane
Source abstract
Abstract
Abstract The performance of an alternative membrane based on aromatic multiblock copolymer was compared to that of the conventional perfluorosulfonic acid (PFSA) polymer membrane during fuel cell operation. The fuel cell with the alternative membrane exhibited more severe voltage loss than the conventional at current densities above 0.6 A/cm2 with fully saturated reactants. To rationalize this difference, operando high-resolution neutron imaging was used to investigate water distribution in the fuel cells, in parallel with impedance measurements. The type of membrane strongly affected water distribution, not only from anode to cathode, but also in-plane between ribs and channels. Specifically, in the alternative membrane, ionomer in cathode catalyst layer was less hydrated and dried as current density increased. The voltage loss with the alternative membrane was ascribed to ionomer drying rather than to the accumulation of liquid water, in accordance with the evolution of ohmic resistance. Furthermore, the alternative membrane experienced swell/shrinkage resulting in material shifts during the operation. These results pinpoint that developing new ionomers for fuel cells require not only to quantify the bulk transport properties of alternative membranes compared to PFSA, but also to evaluate their interfacial properties and the impact of ionomer on water management.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Membrane-based Ion Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Critical review of fuel cell's membranes and identification of alternative types for automotive applications10.1016/j.ijhydene.2015.03.105 ↗
2. The state of the art of electric, hybrid, and fuel cell vehicles10.1109/JPROC.2007.892489 ↗
3. Review—electromobility: batteries or fuel cells?10.1149/2.0211514jes ↗
4. Solid polymer electrolyte membranes for fuel cell applications—a review10.1016/j.memsci.2005.01.035 ↗
5. Nafion® perfluorinated membranes in fuel cells10.1016/j.jfluchem.2004.05.018 ↗
6. Fuel cell catalyst layers and membrane-electrode assemblies containing multiblock poly(arylene ether sulfones) bearing perfluorosulfonic acid side chains10.1149/2.1081810jes ↗
7. Review of advanced materials for proton exchange membrane fuel cells10.1021/ef501977k ↗
8. Hydrocarbon-based polymer electrolyte membranes: importance of morphology on ion transport and membrane stability10.1021/acs.chemrev.6b00586 ↗
9. Controlling microstructure–transport interplay in highly phase-separated perfluorosulfonated aromatic multiblock ionomers via molecular architecture design10.1021/acsami.6b12764 ↗
10. Synthesis of partially fluorinated poly(arylene ether sulfone) multiblock copolymers bearing perfluorosulfonic functions10.1002/pola.27650 ↗
11. Controlling microstructure–transport interplay in highly phase-separated perfluorosulfonated aromatic multiblock ionomers via molecular architecture design10.1021/acsami.6b12764 ↗
12. Effects of block length and membrane processing conditions on the morphology and properties of perfluorosulfonated poly(arylene ether sulfone) multiblock copolymer membranes for PEMFC10.1021/acsami.5b01835 ↗
13. Effect of a neutral fluorinated network on the properties of a perfluorosulfonic acid ionomer as proton exchange membrane10.1016/j.ijhydene.2016.05.240 ↗
14. Strengthening of perfluorosulfonic acid ionomer with sulfonated hydrocarbon polyelectrolyte for application in medium-temperature fuel cell10.1016/j.memsci.2016.04.031 ↗
15. Polyelectrolyte/fluorinated polymer interpenetrating polymer networks as fuel cell membrane10.1016/j.memsci.2012.11.032 ↗
16. Impact of gas stoichiometry on water management and fuel cell performance of a sulfonated Poly(Ether Ether Ketone) membrane10.1016/j.jpowsour.2012.01.102 ↗
17. Ion track grafting: a way of producing low-cost and highly proton conductive membranes for fuel cell applications10.1016/j.jpowsour.2009.07.016 ↗
18. Tailoring the membrane-electrode interface in PEM fuel cells: a review and perspective on novel engineering approaches10.1002/aenm.201701257 ↗
19. The reasons for the high power density of fuel cells fabricated with directly deposited membranes10.1016/j.jpowsour.2016.06.132 ↗
20. Chapter 2 - design and fabrication of PEM fuel cell MEA, single cell, and stack
21. In situ investigation of water transport in an operating PEM fuel cell using neutron radiography: Part 1 – experimental method and serpentine flow field results10.1016/j.ijheatmasstransfer.2006.07.003 ↗
22. Operando properties of gas diffusion layers: saturation and liquid permeability10.1149/2.0881702jes ↗
23. 3 in situ and operando determination of the water content distribution in proton conducting membranes for fuel cells: a critical review10.1039/c2ee21834h ↗
24. Neutron imaging of fuel cells – recent trends and future prospects10.1016/j.coelec.2017.07.012 ↗
25. A review on experimental evaluation of water management in a polymer electrolyte fuel cell using X-ray imaging technique10.1016/j.jpowsour.2012.12.030 ↗
26. Visualising liquid water in PEM fuel cells using neutron imaging10.1002/fuce.200800050 ↗
27. MEASUREMENT METHODS | structural properties: neutron and synchrotron imaging, in-situ for water visualization
28. Liquid water visualization in PEM fuel cells: a review10.1016/j.ijhydene.2009.02.084 ↗
29. In situ and operando characterization of proton exchange membrane fuel cells10.1002/adma.201901900 ↗
30. Large area high resolution neutron imaging detector for fuel cell research10.1016/j.jpowsour.2011.01.049 ↗
31. Real time monitoring of water distribution in an operando fuel cell during transient states10.1016/j.jpowsour.2017.08.067 ↗
32. Quantitative multi-scale operando diagnosis of water localization inside a fuel cell10.1149/2.1401614jes ↗
33. Impact of hydrophobic coating on mass transport losses in PEFCs10.1149/2.0861510jes ↗
34. Liquid water uptake in unconfined Callovo Oxfordian clay-rock studied with neutron and X-ray imaging
35. Synchrotron X-ray radiography as a highly precise and accurate method for measuring the spatial distribution of liquid water in operating polymer electrolyte membrane fuel cells10.1149/2.0041702jes ↗
36. Determination of water diffusion coefficients in perfluorosulfonate ionomeric membranes10.1021/j100168a060 ↗
37. Accurate measurement of the through-plane water content of proton-exchange membranes using neutron radiography10.1063/1.4767118 ↗
38. Effect of relative humidity on oxygen reduction kinetics in a PEMFC10.1149/1.1897368 ↗
39. Study on the effect of humidity and stoichiometry on the water saturation of PEM fuel cells10.1002/er.1845 ↗
40. Simultaneous characterization of oxygen transport resistance and spatially resolved liquid water saturation at high-current density of polymer electrolyte membrane fuel cells with varied cathode relative humidity10.1016/j.ijhydene.2017.10.031 ↗
41. Effects of heat and water transport on the performance of polymer electrolyte membrane fuel cell under high current density operation10.1016/j.electacta.2010.08.070 ↗
42. Impact of MPL thickness on water management of PEMFC by synchrotron X-ray radiography10.1149/06112.0069ecst ↗
43. Local characterization of PEFCs by differential cells: systematic variations of current and asymmetric relative humidity10.1149/2.080401jes ↗
44. Novel electrospun gas diffusion layers for polymer electrolyte membrane fuel cells: Part II. In operando synchrotron imaging for microscale liquid water transport characterization10.1016/j.jpowsour.2017.01.114 ↗
45. Membrane dehydration with increasing current density at high inlet gas relative humidity in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2019.03.001 ↗
46. Three-dimensional analysis of Nafion layers in fuel cell electrodes10.1038/ncomms6229 ↗
47. Hydrocarbon proton conducting polymers for fuel cell catalyst layers10.1039/c0ee00638f ↗
48. Fuel cell catalyst layers: a polymer science perspective10.1021/cm401445h ↗
49. Investigation of hot pressed polymer electrolyte fuel cell assemblies via X-ray computed tomography10.1016/j.electacta.2017.05.028 ↗