journal article·2021-03Open access

Multi-fidelity electrochemical modeling of thermally activated battery cells

Tyler G. Voskuilen, Harry K. Moffat, Benjamin B. Schroeder, Scott A. Roberts

Abstract

Abstract Thermally activated batteries undergo a series of coupled physical changes during activation that influence battery performance. These processes include energetic material burning, heat transfer, electrolyte phase change, capillary-driven two-phase porous flow, ion transport, electrochemical reactions, and electrical transport. Several of these processes are strongly coupled and have a significant effect on battery performance, but others have minimal impact or may be suitably represented by reduced-order models. Assessing the relative importance of these phenomena must be based on comparisons to a high-fidelity model including all known processes. In this work, we first present and demonstrate a high-fidelity, multi-physics model of electrochemical performance. This novel multi-physics model enables predictions of how competing physical processes affect battery performance and provides unique insights into the difficult-to-measure processes that happen during battery activation. We introduce four categories of model fidelity that include different physical simplifications, assumptions, and reduced-order models to decouple or remove costly elements of the simulation. Using this approach, we show an order-of-magnitude reduction in computational cost while preserving all design-relevant quantities of interest within 5 percent. The validity of this approach and these model reductions is demonstrated by comparison between results from the full fidelity model and the different reduced models.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Molten salt chemistry and electrochemical processes · Advanced Battery Technologies Research · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Thermally activated (“thermal”) battery technology - Part I: An overview10.1016/j.jpowsour.2006.06.013 ↗
2. Thermal activated (“thermal”) battery technology - Part II. Molten salt electrolytes10.1016/j.jpowsour.2006.10.080 ↗
3. Thermal activated (“thermal”) battery technology - Part IIIa: FeS2 cathode material10.1016/j.jpowsour.2007.11.017 ↗
4. Thermal activated (“thermal”) battery technology. Part IIIb: Sulfur and oxide-based cathode materials10.1016/j.jpowsour.2007.11.073 ↗
5. Thermally activated (“thermal”) battery technology - Part IV. Anode materials10.1016/j.jpowsour.2008.04.090 ↗
6. E.S. Piekos, H. Papenguth, Observations of thermal behavior in a center-fired battery after a missed heat pellet ignition, in: Proceedings of the 48th Power Sources Conference, 2018, Jun. 2018.
7. H.W. Papenguth, J.R. Weatherby, D. Dobranich, T.C. Barrentine, P.F. Chavez, L.J. Lehoucq, Design-simulation tool for thermal analysis of thermal batteries, in: Proceedings of the Electrochemical Society, 2002, 2002.
8. N.D. Streeter, D. Ingersoll, D. Dobranich, E. Listerud, A thermal model for thermal batteries, in: Proceedings of the 43rd Power Sources Conference, 2008, 2008.
9. B.L. Trembacki, S.R. Harris, E.S. Piekos, S.A. Roberts, Uncertainty quantification, verification, and validation of a thermal simulation tool for molten salt batteries, in: Proceedings of the 47th Power Sources Conference, 2016, 2016.
10. S.A. Roberts, C. Jove-Colon, H. Moffat, M. Neilsen, E. Piekos, B. Schroeder, B. Trembacki, T. Voskuilen, TABS: A thermal battery desktop design tool, in: Proceedings of the 48th Power Sources Conference, 2018, 2018.
11. J. Cho, B. Park, J. Kim, S.-H. Ha, C. Im, Electrochemical and thermal analysis of the thermal battery, in: Proceedings of the 48th Power Sources Conference, 2018, 2018.
12. M. Kenton, D. Bhakta, Improving thermal battery performance through model-based development and improved component designs, in: Proceedings of the 48th Power Sources Conference, 2018, 2018.
13. M. Kenton, J. Wilson, M. Miller, I. Yeaton, S. May, N. Elkouh, D. Bhakta, A comprehensive, physics-based model for thermal batteries, in: Proceedings of the 44th Power Sources Conference, 2010, 2010.
14. Heat transfer analysis of a high-power and large-capacity thermal battery and investigation of effective thermal model10.1016/j.jpowsour.2019.03.067 ↗
15. T.G. Voskuilen, J.C. Hewson, H.K. Moffat, S.A. Roberts, Multi-physics, multi-plateau reaction model for LiSi/FeS2 batteries, in: Proceedings of the 47th Power Sources Conference, 2016, 2016.
16. T.G. Voskuilen, C.F. Jove-Colon, H.K. Moffat, B.B. Schroeder, B.L. Trembacki, S.A. Roberts, Multi-physics cost and complexity reduction strategies for modeling thermally activated batteries, in: Proceedings of the 48th Power Sources Conference, 2018, 2018.
17. S.A. Roberts, K.N. Long, J.S. Rath, L.A. Mondy, A.M. Grillet, Modeling separator deformation and electrolyte flow in thermally-activated batteries, in: Proceedings of the 45th Power Sources Conference, 2012, Jun. 2012.
18. S.A. Roberts, K.N. Long, J.R. Clausen, M.J. Martinez, E.S. Piekos, A.M. Grillet, Towards a coupled multiphysics model of molten salt battery mechanics, in: Proceedings of the 46th Power Sources Conference, 2014, 2014.
19. J. Hewson, H. Moffat, C. Leuth, D. Ingersoll, Predicting electrochemical phenomena in lithium molten salt thermal batteries, in: Proceedings of the 45th Power Sources Conference, 2012, Jun. 2012.
20. J.C. Hewson, H.K. Moffat, V.E. Brunini, Model parameterization for electrochemical predictions of LiSi/FeS2 batteries, in: Proceedings of the 46th Power Sources Conference, 2014, 2014.
21. 2018
22. An overview of the trilinos project10.1145/1089014.1089021 ↗
23. Phase relationships in positive electrodes of high temperature LiAl/LiCl KCl/FeS cells10.1149/1.2124067 ↗
24. Chemical diffusion in intermediate phases in the lithium-silicon system10.1016/0022-4596(81)90487-4 ↗
25. Goodwin · 2018
26. The influence of equilibrium potential on the hydrogen oxidation kinetics of SOFC anodes10.1016/j.ssi.2006.10.020 ↗
27. Thermodynamic properties of lithium-silicon system10.1149/1.2132692 ↗
28. NIST JANAF thermodynamical tables
29. Thermodynamic modeling of the Fe-S system10.1007/s11669-005-0055-y ↗
30. EMF measurements on select transitions of the lial/FeS system10.1149/1.2108460 ↗
31. Mathematical modeling of lithium(alloy), iron disulfide cells10.1149/1.2100664 ↗
32. Mathematical modeling of the LiAl/FeS2 high temperature battery system10.1016/j.jpowsour.2011.11.006 ↗
33. Structure and properties of Li14Si6/Li2.33Si, the violet phase in the lithium-silicon system
34. Li12Si7, eine verbindung mit trigonal-planaren Si4-clustern und isometrischen Si5-ringen10.1002/cber.19861191207 ↗
35. Revision of the Li13Si4 structure10.1107/S1600536813029759 ↗
36. Thermodynamic properties of minerals and related substances at 298.15 K and 1 bar (105 pascals) pressure and at higher temperatures
37. The binary systems FeS-MgS and FeS-MnS: Mossbauer spectroscopy of the b1 solid solutions and high-pressure phase equilibria10.1007/BF00387850 ↗
38. Thermodynamic analysis of component interaction in the system lithium-sulfur10.1023/A:1015570118337 ↗
39. Barin · 1977
40. Wagman · 1982
41. Lyu · 1993
42. Phase equilibria in the Li-LiF-Li2S system10.1021/i160068a019 ↗
43. Mills · 1974
44. Crystal structure of dilithiumsulfide, Li2S
45. Fluid flow through granular beds
46. On the origin and application of the bruggeman correlation for analysing transport phenomena in electrochemical systems10.1016/j.coche.2016.02.006 ↗
47. The Maxwell-Stefan approach to mass transfer10.1016/S0009-2509(96)00458-7 ↗
48. A closed-form equation for predicting the hydraulic conductivity of unsaturated soils10.2136/sssaj1980.03615995004400050002x ↗
49. Developing of joint probability distributions of soil water retention characteristics10.1029/WR024i005p00755 ↗
50. Piekos · 2012
51. A thermal conductivity model for microporous insulations in gaseous environments10.1016/j.ijheatmasstransfer.2019.02.073 ↗