journal article·2021-02

Improved performance of novel sulfonated poly(arylene ether sulfone) copolymer via tethering densely sulfonated pendant groups

Diao Yuan, Yajun Qin, Songsong Li, Shenghua Du, Yaoyao Xu, Qiang Weng, Pei Chen, Xinbing Chen, Zhongwei An

Publisher page

Abstract

A novel monomer with tethering multiple pendant ionizable methoxy groups, 1-(2,6-difluorophenyl)-2-(2′-methoxy-3,3″,5,5″-tetramethoxy [1,1`:3′,1″-terphenyl]-5′-yl)-1,2-ethanedione (DFTMTE), are synthesized and utilized to prepare poly (arylene ether sulfone)s. The copolymers tethering densely sulfonated pendant groups are then obtained via the process of demethylation and nucleophilic substitution. The sulfonated copolymer membranes having ion exchange capacity (IEC) in the range of 1.72–2.64 mequiv. g −1 exhibit high conductivity (215–379 mS cm −1) at 80 °C. The maximum power density is in the range of 1660–1870 mW cm −2, which is significantly higher than that exhibited by commercially available Nafion 212 membranes (117 mS cm −1 and 1350 mW cm −2 ) under the same condition. The improved performance is ascribed to the excellent microphase separation exhibited by these materials, resulting from the densely sulfonated pendant groups and side-chain copolymer structures. Quinoxaline-based crosslinking helps achieve a better balance among the properties of the membranes. The crosslinked membrane CSP-1 (IEC of 1.72 mequiv. g −1) exhibits high conductivity (215 mS cm −1), low membrane swelling (<11%) at 80 °C, high maximum power density (1660 mW cm −2 ), and good stability of the corresponding membrane electrolyte assembly, which reveals a high potential for fuel cell applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Materials and Technologies · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Alternative polymer systems for proton exchange membranes (PEMs)10.1021/cr020711a ↗
2. Recent development of polymer electrolyte membranes for fuel cells10.1021/cr200035s ↗
3. Hydrocarbon-based polymer electrolyte membranes: importance of morphology on ion transport and membrane stability10.1021/acs.chemrev.6b00586 ↗
4. Functional fluoropolymers for fuel cell membranes10.1016/j.progpolymsci.2005.03.004 ↗
5. Review of the proton exchange membranes for fuel cell applications10.1016/j.ijhydene.2010.05.017 ↗
6. New insights into perfluorinated sulfonic-acid ionomers10.1021/acs.chemrev.6b00159 ↗
7. A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research10.1016/j.apenergy.2010.09.030 ↗
8. Metal-organic framework anchored sulfonated poly(ether sulfone) as a high temperature proton exchange membrane for fuel cells10.1016/j.memsci.2018.08.037 ↗
9. Cross-linked sulfonated poly(arylene ether sulfone) containing a flexible and hydrophobic bishydroxy perfluoropolyether cross-linker for high-performance proton exchange membrane10.1021/acsami.8b05139 ↗
10. End-group cross-linked sulfonated poly(arylene ether sulfone) via thiol-ene click reaction for high-performance proton exchange membrane10.1016/j.jpowsour.2018.08.053 ↗
11. Phosphoric acid-doped poly(ether sulfone benzotriazole) for high-temperature proton exchange membrane fuel cell applications10.1016/j.memsci.2017.11.067 ↗
12. Highly proton conducting polyelectrolyte membranes with unusual water swelling behavior based on triptycene-containing poly(arylene ether sulfone) multiblock copolymers10.1021/acsami.7b13542 ↗
13. Poly(sulfonated phenylene)-block-poly(arylene ether sulfone) copolymer for polymer electrolyte fuel cell application10.1016/j.polymer.2012.10.058 ↗
14. Microwave-assisted Diels-Alder polycondensation of proton conducting poly(phenylene)s10.1039/C8PY01804A ↗
15. Comparative study of sulfonated branched and linear poly(phenylene)s polymer electrolyte membranes for fuel cells10.1016/j.ijhydene.2017.08.175 ↗
16. Synthesis and characterization of polymer electrolyte membrane containing methylisatin moiety by polyhydroalkylation for fuel cell10.1016/j.ijhydene.2017.12.164 ↗
17. Enhancing the selectivity of Nafion membrane by incorporating a novel functional skeleton molecule to improve the performance of direct methanol fuel cells10.1039/C9TA10215A ↗
18. Proton-conducting poly(ether sulfone ketone)s containing a high density of pendant sulfonic groups by a convenient and mild post-sulfonation10.1039/C8PY00996A ↗
19. Enhanced performance of a sulfonated poly(arylene ether ketone) block copolymer bearing pendant sulfonic acid groups for polymer electrolyte membrane fuel cells operating at 80% relative humidity10.1021/acsami.8b03790 ↗
20. Highly conductive flexible alkylsulfonated side chains poly(phthalazinone ether ketone)s for proton exchange membranes10.1016/j.polymer.2018.06.043 ↗
21. Facile one-step fabrication of sulfonated polyhedral oligomeric silsesquioxane cross-linked poly(ether ether ketone) for proton exchange membranes10.1039/C8PY00650D ↗
22. The structure–property–performance relationship of disulfonated naphthyl pendants bearing poly(aryl ether)s for polymer electrolyte membrane applications10.1016/j.memsci.2018.01.065 ↗
23. Improvement in the mechanical properties, proton conductivity, and methanol resistance of highly branched sulfonated poly(arylene ether)/graphene oxide grafted with flexible alkylsulfonated side chains nanocomposite membranes10.1016/j.jpowsour.2017.12.057 ↗
24. Effects of tetracarboxylic dianhydrides on the properties of sulfonated polyimides10.1002/pola.23844 ↗
25. Improved performance of sulfonated polyimide composite membranes with rice husk ash as a bio-filler for application in direct methanol fuel cells10.1016/j.ijhydene.2018.11.166 ↗
26. A promising proton-exchange membrane: high efficiency in low humidity10.1021/acsaem.7b00257 ↗
27. Why do proton conducting polybenzimidazole phosphoric acid membranes perform well in high-temperature PEM fuel cells?10.1039/C6CP05331A ↗
28. Highly durable polymer electrolyte membranes at elevated temperature: cross-linked copolymer structure consisting of poly(benzoxazine) and poly(benzimidazole)10.1016/j.jpowsour.2012.11.019 ↗
29. Crosslinked sulfonated poly(arylene ether ketone) membranes bearing quinoxaline and acid-base complex crosslinkages for fuel cell applications10.1016/j.jpowsour.2010.10.039 ↗
30. Quinoxaline-based crosslinked membranes of sulfonated poly(arylene ether sulfone)s for fuel cell applications10.1016/j.ijhydene.2011.06.094 ↗
31. Synthesis and characterization of novel acid-base polymer blends for application in membrane fuel cells10.1016/S0167-2738(99)00181-2 ↗
32. Covalently cross-linked ionomer (blend) membranes for fuel cells
33. Proton conducting membranes based on cross-linked sulfonated poly(ether ether ketone) (SPEEK)10.1016/j.memsci.2004.01.004 ↗
34. Preparation and characteristics of crosslinked sulfonated poly (phthalazinone ether sulfone ketone) with poly(vinyl alcohol) for proton exchange membrane10.1016/j.memsci.2007.12.053 ↗
35. A facile approach for the preparation of cross-linked sulfonated polyimide membranes for fuel cell application10.1039/B613561G ↗
36. Crosslinked SPEEK/AMPS blend membranes with high proton conductivity and low methanol diffusion coefficient for DMFC applications10.1016/j.jpowsour.2006.10.077 ↗
37. Fabrication and properties of cross-linked sulfonated fluorene-containing poly(arylene ether ketone) for proton exchange membrane10.1016/j.jpowsour.2007.03.068 ↗
38. Synthesis and characterization of crosslinked sulfonated poly(arylene ether sulfone) membranes for DMFC applications10.1016/j.memsci.2009.02.034 ↗
39. Covalent-ionically crosslinked sulfonated poly(arylene ether sulfone)s bearing quinoxaline crosslinkages as proton exchange membranes10.1002/app.36517 ↗
40. Covalently and ionically crosslinked sulfonated poly(arylene ether ketone)s as proton exchange membranes10.1007/s00289-011-0638-1 ↗
41. Synthesis and characterization of proton exchange poly (phenylenebenzophenone)s membranes grafted with propane sulfonic acid on pendant phenyl groups10.1016/j.ijhydene.2016.11.054 ↗
42. Novel proton exchange membranes based on sulfonated-phosphonated poly (p-phenylene-co-aryl ether ketone) terpolymers with microblock structures for passive direct methanol fuel cells
43. Preparation and characterization of block copolymers containing multi-sulfonated unit for proton exchange membrane fuel cell10.1016/j.electacta.2012.03.125 ↗
44. Membranes from poly(aryl ether)-based ionomers containing randomly distributed nanoclusters of 6 or 1.2 sulfonic acid groups10.1021/ma802456m ↗
45. Synthesis of poly(arylene ether sulfone)s with locally and densely sulfonated pentiptycene pendants as highly conductive polymer electrolyte membranes10.1016/j.jpowsour.2011.08.028 ↗
46. Sulfonated poly(ether sulfone) electrolytes structured with mesonaphthobifluorene graphene moiety for PEMFC10.1016/j.ijhydene.2013.08.002 ↗
47. Effect of ketone versus sulfone groups on the properties of poly(arylene ether)-based proton exchange membranes10.1007/s10853-016-0214-z ↗
48. Synthesis and properties of novel poly(arylene ether)s with densely sulfonated units based on carbazole derivative
49. A clustered sulfonated poly(ether sulfone) based on a new fluorene-based bisphenol monomer10.1039/c2jm34414a ↗
50. Densely sulfophenylated segmented copoly(arylene ether sulfone) proton exchange membranes10.1021/ma200937w ↗
51. A capillary water retention effect to improve medium-temperature fuel cell performance10.1016/j.elecom.2013.03.018 ↗
52. Preparation and characterization of proton exchange poly(ether sulfone)s membranes grafted propane sulfonic acidon pendant phenyl groups10.1016/j.electacta.2013.11.173 ↗
53. Proton-conducting membranes from poly(ethersulfone)s grafted with sulfoalkylamine10.1016/j.memsci.2012.09.040 ↗
54. Synthesis and characterization of novel crosslinkable side-chain sulfonated poly(arylene ether sulfone) copolymer proton exchange membranes10.1039/D0RA02987D ↗
55. Towards the design of effective multipodal contacts for use in the construction of Langmuir-Blodgett films and molecular junctions10.1039/C9TC04710G ↗
56. Characterization of complex interactions at the gas-solid interface with in situ spectroscopy: the case of nitrogen-functionalized carbon10.1021/acs.jpcc.9b00487 ↗
57. N-doped carbon supported Pt catalyst for base-free oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid10.1016/j.apcata.2016.07.011 ↗
58. High proton-conducting polymer electrolytes based on pendent poly(arylene ether ketone) with H-bond for proton exchange membranes10.1016/j.ijhydene.2013.07.066 ↗
59. Fully aromatic naphthalene-based sulfonated poly(arylene ether ketone)s with flexible sulfoalkyl groups as polymer electrolyte membranes10.1039/C4RA12651C ↗
60. New crosslinked sulfonated polytriazoles: proton exchange properties and microbial fuel cell performance10.1016/j.eurpolymj.2018.04.023 ↗
61. Development of robust proton exchange membranes for fuel cell applications by the incorporation of sulfonated β-cyclodextrin into crosslinked sulfonated poly(vinyl alcohol)10.1016/j.electacta.2018.08.036 ↗
62. Sulfonated oligomer-crosslinked fluorinated poly(aryl ether sulfone)-based proton exchange membranes for fuel cells10.1002/fuce.201700166 ↗
63. Improvement in the mechanical properties, proton conductivity, and methanol resistance of highly branched sulfonated poly(arylene ether)/graphene oxide grafted with flexible alkylsulfonated side chains nanocomposite membranes10.1016/j.jpowsour.2017.12.057 ↗
64. Methanol permeability and proton conductivity of sulfonated co-polyimide membranes10.1016/j.memsci.2005.02.031 ↗
65. Copoly(arylene ether)s containing pendant sulfonic acid groups as proton exchange membranes10.1021/ma802192y ↗
66. Synthesis of sulfonated poly(arylene ether ketone) block copolymers for proton exchange membrane fuel cells10.1016/j.memsci.2016.02.027 ↗
67. Multi-block sulfonated poly(arylene ether nitrile) polymers bearing oligomeric benzotriazole pendants with exceptionally high H2/O2 fuel cell performance10.1016/j.memsci.2018.07.045 ↗
68. Poly(aryl ether ketone) containing flexible tetrasulfonated side chains as proton exchange membranes10.1039/C3PY01350B ↗