journal article·2020-12Open access

Directions of membrane separator development for microbial fuel cells: A retrospective analysis using frequent itemset mining and descriptive statistical approach

László Koók, Gyula Dörgő, Péter Bakonyi, Tamás Rózsenberszki, Nándor Nemestóthy, Katalin Bélafi-Bakó, János Abonyi

Abstract

To increase the efficiency of microbial fuel cells (MFCs), the separator (which is mostly a membrane) placed between the electrodes or their compartments is considered of high importance besides several other biotic and abiotic factors (e.g. configuration, mode of operation, types of inoculum and substrate). Nafion-based proton exchange membranes (PEMs) are the most widespread, although these materials are often criticized on various technological and economical grounds. Therefore, to find alternatives of Nafion, the synthesis, development and testing of novel/commercialized membrane separators with enhanced characteristics have been hot topics. In this study, the goals were to assess the membrane-installed MFCs in a retrospective manner and reveal the trends, the applied practices, frequent setups, etc. via Bayesian classification and frequent itemset mining algorithms. Thereafter, a separate discussion was devoted to examine the current standing of research related to major membrane groups used in MFCs and evaluate in accordance with the big picture how the various systems behave in comparison with each other, especially compared to those applying Nafion PEM. It was concluded that some membrane types seem to be competitive to Nafion, however, the standardization of the experiments would drive the more unambiguous comparison of studies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical sensors and biosensors · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Development of bioelectrochemical systems using various biogas fermenter effluents as inocula and municipal waste liquor as adapting substrate10.1016/j.biortech.2018.03.034 ↗
2. Selective enrichment of biocatalysts for bioelectrochemical systems: a critical review10.1016/j.rser.2019.04.012 ↗
3. Microbial fuel cells: methodology and technology10.1021/es0605016 ↗
4. A logical data representation framework for electricity-driven bioproduction processes10.1016/j.biotechadv.2015.03.002 ↗
5. Engineering materials and biology to boost performance of microbial fuel cells: a critical review10.1039/b806498a ↗
6. Architectural engineering of bioelectrochemical systems from the perspective of polymeric membrane separators: a comprehensive update on recent progress and future prospects10.1016/j.memsci.2018.07.051 ↗
7. Membranes for bioelectrochemical systems: challenges and research advances10.1080/09593330.2013.822007 ↗
8. Ion exchange membranes as separators in microbial fuel cells for bioenergy conversion: a comprehensive review10.1016/j.rser.2013.08.052 ↗
9. A mediator-less microbial fuel cell using a metal reducing bacterium, Shewanella putrefaciens10.1016/S0141-0229(01)00478-1 ↗
10. Continuous electricity generation from domestic wastewater and organic substrates in a flat plate microbial fuel cell10.1021/es0491026 ↗
11. Ion transport in microbial fuel cells: key roles, theory and critical review10.1016/j.apenergy.2016.09.043 ↗
12. Effects of membrane cation transport on pH and microbial fuel cell performance10.1021/es060387r ↗
13. Separators used in microbial electrochemical technologies: current status and future prospects10.1016/j.biortech.2015.06.105 ↗
14. Selectivity versus mobility: separation of anode and cathode in microbial bioelectrochemical systems10.1002/cssc.200900111 ↗
15. Membrane selectivity determines energetic losses for ion transport in bioelectrochemical systems
16. Biofouling of membranes in microbial electrochemical technologies: causes, characterization methods and mitigation strategies10.1016/j.biortech.2019.02.001 ↗
17. Comparison of alternative membranes to replace high cost Nafion ones in microbial fuel cells10.1016/j.ijhydene.2016.08.206 ↗
18. Recent advances in the separators for microbial fuel cells10.1016/j.biortech.2010.03.090 ↗
19. Anion-exchange membranes in electrochemical energy systems10.1039/C4EE01303D ↗
20. A review on the role of proton exchange membrane on the performance of microbial fuel cell10.1002/pat.3383 ↗
21. A review into the use of ceramics in microbial fuel cells10.1016/j.biortech.2016.03.135 ↗
22. Composite materials for polymer electrolyte membrane microbial fuel cells10.1016/j.bios.2015.02.013 ↗
23. Supported ionic liquid membrane based on [bmim][PF6] can be a promising separator to replace Nafion in microbial fuel cells and improve energy recovery: a comparative process evaluation10.1016/j.memsci.2018.10.063 ↗
24. Development and application of supported ionic liquid membranes in microbial fuel cell technology: a concise overview10.3390/membranes10010016 ↗
25. Mining frequent patterns without candidate generation
26. Recovery of electrical energy in microbial fuel cells10.1021/ez4000324 ↗
27. Sources of variability in greenhouse gas and energy balances for biofuel production: a systematic review10.1111/j.1757-1707.2010.01047.x ↗
28. Microbial fuel cells as pollutant treatment units: research updates10.1016/j.biortech.2016.02.006 ↗
29. Idiot's Bayes - not so stupid after all?
30. High power generation and COD removal in a microbial fuel cell operated by a novel sulfonated PES/PES blend proton exchange membrane10.1016/j.energy.2017.02.146 ↗
31. SPEEK/cSMM membrane for simultaneous electricity generation and wastewater treatment in microbial fuel cell10.1002/jctb.4622 ↗
32. Development of low cost ceramic separator using mineral cation exchanger to enhance performance of microbial fuel cells10.1016/j.electacta.2015.03.105 ↗
33. A novel low cost polyvinyl alcohol-Nafion-borosilicate membrane separator for microbial fuel cell10.1016/j.matchemphys.2016.07.008 ↗
34. A comparison of long-term fouling performance by zirconia ceramic filter and cation exchange in microbial fuel cells10.1016/j.ibiod.2018.11.001 ↗
35. Electricity generation using membrane and salt bridge microbial fuel cells10.1016/j.watres.2005.02.002 ↗
36. Microbial fuel cell (MFC) using commercially available unglazed ceramic wares: low-cost ceramic separators suitable for scale-up10.1016/j.ijhydene.2017.02.095 ↗
37. A novel hybrid anion exchange membrane for high performance microbial fuel cells10.1039/C4RA11638K ↗
38. Power generation using different cation, anion, and ultrafiltration membranes in microbial fuel cells10.1021/es062202m ↗
39. Composite membrane containing graphene oxide in sulfonated polyether ether ketone in microbial fuel cell applications10.1016/j.ijhydene.2015.04.082 ↗
40. On the efficiency of dual-chamber biocatalytic electrochemical cells applying membrane separators prepared with imidazolium-type ionic liquids containing [NTf2]− and [PF6]− anions10.1016/j.cej.2017.05.022 ↗
41. Performance evaluation of microbial electrochemical systems operated with Nafion and supported ionic liquid membranes10.1016/j.chemosphere.2017.02.055 ↗
42. Performance comparison of three common proton exchange membranes for sustainable bioenergy production in microbial fuel cell10.1016/j.procir.2014.07.169 ↗
43. New generation of carbon nanocomposite proton exchange membranes in microbial fuel cell systems10.1016/j.cej.2012.01.001 ↗
44. Simultaneous wastewater treatment and electricity generation by microbial fuel cell: performance comparison and cost investigation of using Nafion 117 and SPEEK as separators10.1016/j.desal.2013.06.013 ↗
45. Sulfonated poly ether ether ketone with different degree of sulphonation in microbial fuel cell: application study and economical analysis10.1016/j.ijhydene.2015.10.029 ↗
46. Effect of pre-treatment and biofouling of proton exchange membrane on microbial fuel cell performance10.1016/j.ijhydene.2012.09.148 ↗
47. Synthesis, characterization and application studies of self-made Fe 3O4/PES nanocomposite membranes in microbial fuel cell10.1016/j.electacta.2011.08.036 ↗
48. Characterization of membrane biofouling and its effect on the performance of microbial fuel cell10.1016/j.ijhydene.2015.09.037 ↗
49. Improvement of microbial fuel cell performance by using nafion polyaniline composite membranes as a separator10.1115/1.4024866 ↗
50. Low-cost separators for enhanced power production and field application of microbial fuel cells (MFCs)10.1016/j.electacta.2014.03.046 ↗
51. Performance enhancement of microbial fuel cell by PVDF/Nafion nanofibre composite proton exchange membrane10.1016/j.fuproc.2014.03.015 ↗
52. Proton exchange membrane and electrode surface areas as factors that affect power generation in microbial fuel cells10.1007/s00253-005-0066-y ↗
53. Comparison of performance and ionic concentration gradient of two-chamber microbial fuel cell using ceramic membrane (CM) and cation exchange membrane (CEM) as separators10.1016/j.electacta.2017.10.118 ↗
54. Microfiltration membrane performance in two-chamber microbial fuel cells10.1016/j.bej.2010.08.007 ↗
55. Performance of electron acceptors in catholyte of a two-chambered microbial fuel cell using anion exchange membrane10.1016/j.biortech.2010.11.038 ↗
56. Electrochemical performance of microbial fuel cells based on disulfonated poly(arylene ether sulfone) membranes10.1016/j.jpowsour.2012.07.109 ↗
57. Performance of an anion exchange membrane in association with cathodic parameters in a dual chamber microbial fuel cell10.1016/j.ijhydene.2012.03.011 ↗
58. Power generation and wastewater treatment using a novel SPEEK nanocomposite membrane in a dual chamber microbial fuel cell10.1016/j.ijhydene.2014.10.026 ↗
59. High-quality effluent and electricity production from non-CEM based flow-through type microbial fuel cell10.1016/j.cej.2012.12.018 ↗
60. Electricity generation and removal performance of a microbial fuel cell using sulfonated poly (ether ether ketone) as proton exchange membrane to treat phenol/acetone wastewater10.1016/j.biortech.2018.03.133 ↗
61. Evaluation of dairy industry wastewater treatment and simultaneous bioelectricity generation in a catalyst-less and mediator-less membrane microbial fuel cell10.1016/j.jscs.2014.08.002 ↗
62. Simultaneous wastewater treatment and bioelectricity production in microbial fuel cells using cross-linked chitosan-graphene oxide mixed-matrix membranes10.1007/s11356-017-8839-2 ↗
63. Enhanced surface functionality and microbial fuel cell performance of chitosan membranes through phosphorylation10.1016/j.carbpol.2016.04.118 ↗
64. Synthesis, characterization and performance evaluation of Fe3O4/PES nano composite membranes for microbial fuel cell10.1016/j.eurpolymj.2017.12.037 ↗
65. Treatment of wastewater in H-type MFC with protonic exchange membrane: experimental study of organic carbon and ammonium reduction with electrochemical characterization
66. Performance analysis of a double-chambered microbial fuel cell employing a low-cost sulfonated polystyrene proton exchange membrane10.1007/s11581-018-2480-z ↗
67. Influence of the ion-exchange membrane on the performance of double-compartment microbial fuel cells10.1016/j.jelechem.2017.06.018 ↗
68. The effect of Nafion membrane fouling on the power generation of a microbial fuel cell
69. Electricity production by a microbial fuel cell fueled by brewery wastewater and the factors in its membrane deterioration
70. Regenerated silk fibroin membranes as separators for transparent microbial fuel cells10.1016/j.bioelechem.2018.12.004 ↗
71. Microbial fuel cell performance of graphitic carbon functionalized porous polysiloxane based ceramic membranes10.1016/j.bioelechem.2019.06.002 ↗
72. Comparative performance evaluation of novel polystyrene membrane with ultrex as Proton Exchange Membranes in Microbial Fuel Cell for bioelectricity production from food waste10.1016/j.biortech.2018.06.085 ↗
73. A novel proton exchange membrane developed from clay and activated carbon derived from coconut shell for application in microbial fuel cell10.1016/j.bej.2019.05.011 ↗
74. Comparative study of bioelectricity generation in a microbial fuel cell using ceramic membranes made of ceramic powder, Kalporgan's soil, and acid leached Kalporgan's soil10.1016/j.energy.2019.04.124 ↗
75. Simultaneous degradation of P-nitroaniline and electricity generation by using a microfiltration membrane dual-chamber microbial fuel cell10.1016/j.ijhydene.2017.11.025 ↗
76. Assessment of expanded polystyrene as a separator in microbial fuel cell10.1080/09593330.2018.1435740 ↗
77. Polysulfone composed of polyaniline nanoparticles as nanocomposite proton exchange membrane in microbial fuel cell10.3844/ajbbsp.2012.311.319 ↗
78. Enhanced power production of a membrane electrode assembly microbial fuel cell (MFC) using a cost effective poly [2,5-benzimidazole] (ABPBI) impregnated non-woven fabric filter10.1016/j.biortech.2012.10.013 ↗
79. Novel low cost proton exchange membrane made from sulphonated biochar for application in microbial fuel cells10.1016/j.matchemphys.2019.122025 ↗
80. Upgrading the electrochemical performance of graphene oxide-blended sulfonated polyetheretherketone composite polymer electrolyte membrane for microbial fuel cell application10.1016/j.bcab.2019.101369 ↗
81. Separator characteristics for increasing performance of microbial fuel cells10.1021/es901631p ↗
82. Scalable air cathode microbial fuel cells using glass fiber separators, plastic mesh supporters, and graphite fiber brush anodes10.1016/j.biortech.2010.05.090 ↗
83. Improved performance of single-chamber microbial fuel cells through control of membrane deformation10.1016/j.bios.2009.11.018 ↗
84. Enhancing the stability of power generation of single-chamber microbial fuel cells using an anion exchange membrane10.1002/jctb.2242 ↗
85. Improving startup performance with carbon mesh anodes in separator electrode assembly microbial fuel cells10.1016/j.biortech.2013.01.036 ↗
86. Electrochemical analysis of separators used in single-chamber, air-cathode microbial fuel cells10.1016/j.electacta.2012.11.004 ↗
87. Acid catalysed cross-linking of poly vinyl alcohol (PVA) by glutaraldehyde: effect of crosslink density on the characteristics of PVA membranes used in single chambered microbial fuel cells10.1039/C5RA16068E ↗
88. Use of novel permeable membrane and air cathodes in acetate microbial fuel cells10.1016/j.electacta.2009.11.086 ↗
89. Development of MFC using sulphonated polyether ether ketone (SPEEK) membrane for electricity generation from waste water10.1016/j.biortech.2011.09.021 ↗
90. Graphene oxide-impregnated PVA-STA composite polymer electrolyte membrane separator for power generation in a single-chambered microbial fuel cell10.1021/ie4016045 ↗
91. Application of PVA-PDDA polymer electrolyte composite anion exchange membrane separator for improved bioelectricity production in a single chambered microbial fuel cell10.1016/j.cej.2014.06.077 ↗
92. Improved performance of microbial fuel cells using sulfonated polyether ether ketone (SPEEK) TiO2-SO3H nanocomposite membrane10.1039/c3ra44212h ↗
93. Performance of low cost scalable air-cathode microbial fuel cell made from clayware separator using multiple electrodes10.1016/j.biortech.2015.01.115 ↗
94. Highly efficient sulfonated polybenzimidazole as a proton exchange membrane for microbial fuel cells10.1016/j.jpowsour.2016.03.103 ↗
95. Design of clayware separator-electrode assembly for treatment of wastewater in microbial fuel cells10.1007/s12010-014-0846-x ↗
96. Using crosslinked polyvinyl alcohol polymer membrane as a separator in the microbial fuel cell10.1007/s11783-013-0534-z ↗
97. Nanocomposite membranes based on sulfonated polystyrene ethylene butylene polystyrene (SSEBS) and sulfonated SiO2 for microbial fuel cell application10.1016/j.cej.2015.12.095 ↗
98. Influence of sulfonated SiO2 in sulfonated polyether ether ketone nanocomposite membrane in microbial fuel cell10.1016/j.fuel.2015.07.002 ↗
99. Comparison of electrochemical and microbiological characterization of microbial fuel cells equipped with SPEEK and Nafion membrane electrode assemblies10.1016/j.jbiosc.2016.02.005 ↗
100. Characterization of uncharged and sulfonated porous poly(vinylidene fluoride) membranes and their performance in microbial fuel cells10.1016/j.memsci.2014.03.061 ↗