journal article·2019-08Open access

Physicochemical impedance modeling of solid oxide fuel cell anode as an alternative tool for equivalent circuit fitting

Masashi Kishimoto, Hironori Onaka, Hiroshi Iwai, Motohiro Saito, Hideo Yoshida

Abstract

A simple but physicochemically meaningful numerical model of a solid oxide fuel cell (SOFC) anode is developed as a tool to understand and reproduce its impedance spectra. The model considers conservations of electrons, ions and gas species within the anode, which are coupled by a non-linear electrochemical reaction model. The developed model is first calibrated by impedance spectra that are experimentally obtained at the open circuit conditions at several temperatures, by adjusting the ionic conductivity, exchange current density and electrostatic capacitance. All of these parameters are confirmed to be within an acceptable range of values found in literature. Also, real anode microstructural parameters obtained by three-dimensional FIB-SEM imaging is implemented to eliminate any other arbitrary fitting parameters from the model. Then, the model is used to reproduce impedance spectra obtained from another anode with different microstructure and also those measured at polarized conditions and at different temperatures, and gives good agreement with the experimental results. Considering the computational resources required to reproduce impedance spectra, the developed model is expected to be used as an alternative to the conventional equivalent circuit fitting.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Current status of national SOFC project in Japan10.1149/06801.0015ecst ↗
2. Stationary fuel cells – insights into commercialisation10.1016/j.ijhydene.2014.05.177 ↗
3. A review of AC impedance modeling and validation in SOFC diagnosis10.1016/j.electacta.2007.05.071 ↗
4. Anomalous transport effects in the impedance of porous film electrodes10.1016/S1388-2481(99)00084-3 ↗
5. Electrode kinetics of porous mixed-conducting oxygen electrodes10.1149/1.1837252 ↗
6. Interpretation of the Gerischer impedance in solid state ionics10.1016/S0167-2738(02)00185-6 ↗
7. Physically-based deconvolution of impedance spectra: interpretation, fitting and validation of a numerical model for lanthanum strontium cobalt ferrite-based solid oxide fuel cells10.1016/j.electacta.2016.04.181 ↗
8. Validation of a physically-based solid oxide fuel cell anode model combining 3D tomography and impedance spectroscopy10.1016/j.ijhydene.2016.09.100 ↗
9. A new computational approach for SOFC impedance from detailed electrochemical reaction–diffusion models10.1016/j.ssi.2005.01.002 ↗
10. Impedance spectroscopy as a tool for chemical and electrochemical analysis of mixed conductors: a case study of ceria10.1111/j.1551-2916.2005.00740.x ↗
11. Analytical, 1-dimensional impedance model of a composite solid oxide fuel cell cathode10.1149/2.077401jes ↗
12. Quantitative evaluation of solid oxide fuel cell porous anode microstructure based on focused ion beam and scanning electron microscope technique and prediction of anode overpotentials10.1016/j.jpowsour.2010.12.100 ↗
13. Numerical assessment of SOFC anode polarization based on three-dimensional model microstructure reconstructed from FIB-SEM images10.1149/1.3330568 ↗
14. Three-dimensional simulation of SOFC anode polarization characteristics based on sub-grid scale modeling of microstructure10.1149/2.086203jes ↗
15. Electrical properties of Ni/YSZ cermets obtained through combustion synthesis10.1016/S0167-2738(98)00115-5 ↗
16. A new method for prediction of binary gas-phase diffusion coefficients
17. The capacitance of nickel pattern electrodes on zirconia electrolyte10.1149/2.0951610jes ↗
18. Characteristics of slurry-coated nickel zirconia cermet anodes for solid oxide fuel cells10.1149/1.2086156 ↗
19. Enhanced triple-phase boundary density in infiltrated electrodes for solid oxide fuel cells demonstrated by high-resolution tomography10.1016/j.jpowsour.2014.05.038 ↗
20. Numerical modeling of nickel-infiltrated gadolinium-doped ceria electrodes reconstructed with focused ion beam tomography10.1016/j.electacta.2015.12.044 ↗
21. Combined deconvolution and CNLS fitting approach applied on the impedance response of technical Ni∕8YSZ cermet electrodes10.1149/1.2908860 ↗
22. A mathematical model of a solid oxide fuel cell10.1149/1.2048415 ↗
23. Physically based impedance modeling of Ni/YSZ cermet anodes10.1149/1.2943411 ↗
24. de Boer · 1998
25. The electrochemistry of Ni pattern anodes used as solid oxide fuel cell model electrodes10.1149/1.1372219 ↗
26. Deconvolution of four transmission-line-model impedances in Ni-YSZ/YSZ/LSM solid oxide cells and mechanistic insights10.1016/j.electacta.2015.11.118 ↗
27. Electrochemical impedance modeling of a solid oxide fuel cell anode10.1002/fuce.201300292 ↗