External reinforcement of hydrocarbon membranes by a three-dimensional interlocking interface for mechanically durable polymer electrolyte membrane fuel cells
Source abstract
Abstract
Abstract Although, the use of hydrocarbon membranes is one of the ways to reduce the cost of polymer electrolyte membrane fuel cells, it cannot be practically adopted due to its low mechanical durability under a dynamic wet/dry operation. Here, we present an externally-reinforced hydrocarbon membrane achieved by a three dimensional interlocking interfacial layer which forms a strong interfacial bonding between the hydrocarbon membrane and the catalyst layers. Although a conventional hydrocarbon membrane is easily delaminated from gas diffusion electrodes, the use of the three dimensional interlocking interfacial layer, prepared with a polystyrene nanoparticle template method, enhances the interfacial adhesion by 207 times. The hydrocarbon membrane, tightly connected to the gas diffusion electrodes by the three dimensional interlocking interfacial layers, has a humidity cycling durability that is 1.9 times higher in the membrane electrode assembly level by restricting the dimensional change of the membrane. Furthermore, due to the proton conducting property of the three dimensional interlocking interfacial layer, the external reinforcement does not cause any power performance losses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. New insights into perfluorinated sulfonic-acid ionomers10.1021/acs.chemrev.6b00159 ↗
2. Scientific aspects of polymer electrolyte fuel cell durability and degradation10.1021/cr050182l ↗
3. On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells10.1016/S0376-7388(00)00632-3 ↗
4. Properties of Nafion® NR-211 membranes for PEMFCs10.1016/j.memsci.2010.03.025 ↗
5. Recent developments in proton exchange membranes for fuel cells10.1039/b808149m ↗
6. Structure-morphology-property relationships of non-perfluorinated proton-conducting membranes10.1002/adma.201001164 ↗
7. R&D of asahi kasei aciplex membrane for PEM fuel cell applications10.1149/1.2981963 ↗
8. AQUIVION™ -- the short-side-chain and low-EW PFSA for next-generation PEFCs expands production and utilization10.1149/1.3428998 ↗
9. Design and properties of functional hybrid organic–inorganic membranes for fuel cells10.1039/c0cs00144a ↗
10. Sulfonated hydrocarbon membranes for medium-temperature and low-humidity proton exchange membrane fuel cells (PEMFCs)10.1016/j.progpolymsci.2011.06.001 ↗
11. Proton-conducting composite membranes derived from sulfonated hydrocarbon and inorganic materials10.1016/S0378-7753(03)00605-0 ↗
12. Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranes10.1016/S0376-7388(01)00620-2 ↗
13. Novel sulfonated polyimides as polyelectrolytes for fuel cell application. 1. Synthesis, proton conductivity, and water stability of polyimides from 4,4‘-diaminodiphenyl ether-2,2‘-disulfonic acid10.1021/ma020005b ↗
14. Novel sulfonated polyimides as polyelectrolytes for fuel cell application. 2. Synthesis and proton conductivity of polyimides from 9,9-Bis(4-aminophenyl)fluorene-2,7-disulfonic acid10.1021/ma020260w ↗
15. Synthesis of sulfonated poly(arylene ether ketone) block copolymers for proton exchange membrane fuel cells10.1016/j.memsci.2016.02.027 ↗
16. Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes10.1016/j.memsci.2003.09.019 ↗
17. Enhanced durability of polymer electrolyte membrane fuel cells by functionalized 2D boron nitride nanoflakes10.1021/am5010317 ↗
18. Proton-conducting membranes based on benzimidazole polymers for high-temperature PEM fuel cells. A chemical quest10.1039/b922650h ↗
19. An electrode-supported fabrication of thin polybenzimidazole membrane-based polymer electrolyte membrane fuel cell10.1016/j.electacta.2018.03.052 ↗
20. Mechanical properties of Nafion™ electrolyte membranes under hydrated conditions10.1016/j.polymer.2005.09.059 ↗
21. Proton exchange membrane for DMFC and H2/air fuel cells: synthesis and characterization of partially fluorinated disulfonated poly(arylene ether benzonitrile) copolymers10.1016/j.memsci.2007.04.004 ↗
22. A review of polymer–nanocomposite electrolyte membranes for fuel cell application10.1016/j.jiec.2014.04.030 ↗
23. Sulfonated polyimide/PTFE reinforced membrane for PEMFCs10.1016/j.jpowsour.2006.12.111 ↗
24. Mussel-inspired polydopamine-treated composite electrolytes for long-term operations of polymer electrolyte membrane fuel cells10.1039/c3ta13166a ↗
25. One-step fabrication and characterization of reinforced microcomposite membranes for polymer electrolyte membrane fuel cells10.1016/j.memsci.2018.06.060 ↗
26. SiO2 nanoparticles-coated poly(paraphenylene terephthalamide) nonwovens as reinforcing porous substrates for proton-conducting, sulfonated poly(arylene ether sulfone)-impregnated composite membranes10.1016/j.ssi.2011.03.015 ↗
27. Properties of sulfonated poly(arylene ether sulfone)/electrospun nonwoven polyacrylonitrile composite membrane for proton exchange membrane fuel cells10.1016/j.memsci.2013.06.028 ↗
28. External reinforced layers for improved fuel cell durability10.1149/MA2011-02/16/910 ↗
29. Structural reinforcement of membrane electrodes
30. Direct coated membrane electrode assembly on external reinforcement for fuel cells
31. The effect of sulfonated poly(ether ether ketone) as an electrode binder for direct methanol fuel cell (DMFC)10.1016/j.jpowsour.2006.01.075 ↗
32. Chemically tuned anode with tailored aqueous hydrocarbon binder for direct methanol fuel cells10.1021/la900406d ↗
33. Direct deposition of proton exchange membranes enabling high performance hydrogen fuel cells10.1039/C5TA01341K ↗
34. A completely spray-coated membrane electrode assembly10.1016/j.elecom.2016.06.017 ↗
35. Nafion membranes with a porous surface10.1016/j.memsci.2014.03.003 ↗
36. Interlocking membrane/catalyst layer interface for high mechanical robustness of hydrocarbon-membrane-based polymer electrolyte membrane fuel cells10.1002/adma.201500328 ↗
37. Three-dimensional interlocking interface: mechanical nanofastener for high interfacial robustness of polymer electrolyte membrane fuel cells10.1002/adma.201603056 ↗
38. A hydrocarbon/Nafion bilayer membrane with a mechanical nano-fastener for vanadium redox flow batteries10.1039/C7TA02921G ↗
39. Ion-conducting polymer comprising controlled sulfonated poly(phenyl sulfone) and use thereof
40. Facile size-controllable syntheses of highly monodisperse polystyrene nano- and microspheres by polyvinylpyrrolidone-mediated emulsifier-free emulsion polymerization10.1002/app.27774 ↗
41. Flexible (Kapton-based) microsensor arrays of high stability for cardiovascular applications10.1039/ft9938900361 ↗
42. Novel interfacial bonding layers with controlled gradient composition profile for hydrocarbon-based membrane electrode assemblies10.1016/j.jpowsour.2018.07.045 ↗
43. Use of a sub-gasket and soft gas diffusion layer to mitigate mechanical degradation of a hydrocarbon membrane for polymer electrolyte fuel cells in wet-dry cycling10.1016/j.jpowsour.2016.06.012 ↗