journal article·2024-03

Impacts of bubble defects in proton exchange membranes on fuel cell performance and durability

Jonas Stoll, Nana Zhao, Xiao-Zi Yuan, Francois Girard, Erik Kjeang, Zhiqing Shi

Publisher page

Abstract

The proton exchange membrane (PEM) is a critical component of PEM fuel cells, which is typically fabricated by casting an ionomer dispersion on a substrate and then annealing the remaining ionomer film after solvent evaporation. Due to the high viscosity of the ionomer dispersion, gas bubbles of various sizes may get lodged within the dispersion during the casting process, and some of these bubbles may even persist after annealing. To improve the understanding of the tolerance of PEM bubbles and their impact on the fuel cell performance and durability, we fabricated Nafion™ PEMs with intentionally infused air bubbles with different sizes and quantities for fuel cell testing and evaluation against pristine, bubble-free PEMs. The results show that bubbles embedded in the PEM significantly reduce fuel cell performance and durability. In addition, the tensile strength of PEMs with bubbles is discovered to be lower than that of pristine PEMs. A burst test reveals that the failure cross-pressure of PEMs with bubbles is one magnitude lower than for pristine PEMs, suggesting heightened sensitivity to pressure differentials in PEMs containing bubbles. Overall, the low tolerance of membrane bubbles is deemed critical for production of robust fuel cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Membrane-based Ion Separation Techniques · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. O'Hayre · 2016
2. Chapter 4 - polymer electrolyte fuel cells
3. 2018
4. Fabrication method for Laboratory-scale high-performance membrane electrode assemblies for fuel cells10.1021/acs.analchem.6b03005 ↗
5. Slot-die-coating operability windows for polymer electrolyte membrane fuel cell cathode catalyst layers10.1016/j.jcis.2021.11.047 ↗
6. Gravure coating for roll-to-roll manufacturing of proton-exchange-membrane fuel cell catalyst layers10.1149/2.0091813jes ↗
7. Catalyst layer optimization by surface tension control during ink formulation of membrane electrode assemblies in proton exchange membrane fuel cell10.1016/j.jpowsour.2011.01.010 ↗
8. Roll-to-roll stack and lamination of gas diffusion layer in multilayer structured membrane electrode assembly10.1177/0954405419862090 ↗
9. A novel approach to fabricate membrane electrode assembly by directly coating the nafion ionomer on catalyst layers for proton-exchange membrane fuel cells10.1021/acssuschemeng.0c02386 ↗
10. The effect of membrane casting irregularities on initial fuel cell performance10.1002/fuce.201900149 ↗
11. Manufacturing defects in slot die coated polymer electrolyte membrane for fuel cell application10.1016/j.ces.2023.119051 ↗
12. Mechanism of pinhole formation in membrane electrode assemblies for PEM fuel cells
13. The effects of pinholes on proton exchange membrane fuel cell performance10.1002/er.1728 ↗
14. Application of a segmented cell setup to detect pinhole and catalyst loading defects in proton exchange membrane fuel cells10.1016/j.electacta.2012.04.138 ↗
15. Experimental investigation of pinhole effect on MEA/cell aging in PEMFC10.1016/j.ijhydene.2012.09.058 ↗
16. Effect of pinhole location on degradation in polymer electrolyte fuel cells10.1016/j.jpowsour.2015.07.021 ↗
17. Factors determining the gas crossover through pinholes in polymer electrolyte fuel cell membranes10.1016/j.electacta.2012.07.013 ↗
18. Effect of catalyst layer defects on local membrane degradation in polymer electrolyte fuel cells10.1016/j.jpowsour.2016.05.016 ↗
19. 3D visualization of membrane failures in fuel cells10.1016/j.jpowsour.2017.01.129 ↗
20. Tracking the evolution of mechanical degradation in fuel cell membranes using 4D in situ visualization10.1016/j.jpowsour.2018.11.049 ↗
21. 4D imaging of chemo-mechanical membrane degradation in polymer electrolyte fuel cells - Part 2: unraveling the coupled degradation mechanisms within the active area
22. 4D in situ visualization of mechanical degradation evolution in reinforced fuel cell membranes10.1016/j.ijhydene.2020.02.013 ↗
23. Impacts of cathode catalyst layer defects on performance and durability in PEM fuel cells10.1016/j.jpowsour.2023.233565 ↗
24. Impacts of electrode coating irregularities on polymer electrolyte membrane fuel cell lifetime using quasi in-situ infrared thermography and accelerated stress testing10.1016/j.ijhydene.2018.02.050 ↗
25. 2023
26. Evaluation of hydrogen crossover through fuel cell membranes10.1002/fuce.201300215 ↗
27. Benchmarking proton exchange membrane fuel cell cathode catalyst at high current density: a comparison between the rotating disk electrode, the gas diffusion electrode and differential cell10.1016/j.jpowsour.2022.232491 ↗
28. Research progress of proton exchange membrane failure and mitigation strategies10.3390/ma14102591 ↗
29. Assessing the degradation pattern and mechanism of membranes in polymer electrolyte membrane fuel cells using open-circuit voltage hold and humidity cycle test protocols