The capacity decay mechanism of the 100% SOC LiCoO2/graphite battery after high-temperature storage
Source abstract
Abstract
LiCoO 2||graphite full cells are one of the most promising commercial lithium-ion batteries, which are widely used in portable devices. However, they still suffer from serious capacity degradation after long-time high-temperature storage, thus it is of great significance to study the decay mechanism of LiCoO 2||graphite full cell. In this work, the commercial 63 mAh LiCoO 2 ||graphite battery was employed to reveal the capacity decay mechanism during the storage process at a high temperature of 65 °C. It was found that after storing at 65 °C under 100% state-of-charge (SOC) for 1 month, 2 months, 3 months, and 6 months, the discharge capacity of the battery decreases by 27%, 36%, 43%, and 66% respectively, compared to that of the fresh battery. Moreover, the corresponding restored capacity is 14%, 18%, 23%, and 35%, respectively, where the irreversible capacity loss is 13%, 18%, 20%, and 31%. After characterizing the stored electrodes at 65 °C, the quantitative analysis results illustrated that the capacity decay is related to the formation of dead lithium on graphite electrode and the shuttle effect of Co 3+ after a long storage time.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Battery monitoring and electrical energy management recondition for future vehicle electric power systems10.1016/S0378-7753(02)00713-9 ↗
2. The path towards sustainable energy10.1038/nmat4834 ↗
3. A growing appreciation for the role of LiF in the solid electrolyte interphase10.1002/aenm.202100046 ↗
4. Understanding the enhancement effect of boron doping on the electrochemical performance of single-crystalline Ni-rich cathode materials10.1016/j.jcis.2021.07.027 ↗
5. Ultrathin Al2O3 coatings for improved cycling performance and thermal stability of LiNi0.5Co0.2Mn0.3O2 cathode material10.1016/j.electacta.2016.03.185 ↗
6. Significant improvement of electrochemical properties of AlF3-coated LiNi0.5Co0.2Mn0.3O2 cathode materials10.1016/j.electacta.2011.12.121 ↗
7. Research on high temperature storage performance of the lithium-rich manganese-based cathode material
8. Electrochemical calorimetric studies of lithium-ion cells10.1149/1.1838509 ↗
9. Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: a review10.1016/j.enconman.2017.08.016 ↗
10. Cycling a lithium metal anode at 90 °C in a liquid electrolyte10.1002/anie.202002711 ↗
11. Thermal stability of materials used in lithium-ion cells
12. Study of thermal deterioration of lithium-ion secondary cell using an accelerated rate calorimeter (ARC) and AC impedance method10.1016/j.jpowsour.2011.09.067 ↗
13. Optimized nonflammable concentrated electrolytes by introducing a low-dielectric diluent10.1021/acsami.9b12709 ↗
14. Lithium ion battery anode aging mechanisms10.3390/ma6041310 ↗
15. Influence of cycle capacity deterioration and storage capacity deterioration on Li-ion batteries used in mobile phones10.1016/j.jpowsour.2004.10.007 ↗
16. A causal study of the capacity fading of Li1.01Mn1.99O4 cathode at 80 °C, and the suppressing substance of its fading10.1016/S0378-7753(01)00479-7 ↗
17. Review on electrode–electrolyte solution interactions, related to cathode materials for Li-ion batteries10.1016/j.jpowsour.2006.10.025 ↗
18. Capacity fade of Li Ni(1-x-y)CoxAlyO2 cathode for lithium-ion batteries during accelerated calendar and cycle life test. I. Comparison analysis between Li Ni(1-x-y)CoxAlyO2 and LiCoO2 cathodes in cylindrical lithium-ion cells during long term storage test10.1016/j.jpowsour.2013.08.079 ↗
19. Capacity fade mechanisms and side reaction in lithium-ion batteries10.1149/1.1838857 ↗
20. An unpredictable hazard in lithium-ion batteries from transition metal ions: dissolution from cathodes, deposition on anodes and elimination strategies
21. Understanding self-discharge mechanism of layered nickel cobalt manganese oxide at high potential10.1016/j.jpowsour.2015.04.032 ↗
22. Understanding and suppressing the destructive cobalt(II) species in graphite interphase10.1021/acsami.9b08949 ↗
23. Crystal structure studies of thermally aged LiCoO2 and Li Mn2O4 cathodes10.1016/j.electacta.2006.02.050 ↗
24. Structural considerations of layered and spinel lithiated oxides for lithium ion batteries10.1149/1.2050053 ↗
25. Structural fatigue in spinel electrodes in high voltage (4 V) Li/LixMn2O4 cells10.1149/1.1390617 ↗
26. On the capacity fading of LiCoO2 intercalation electrodes:the effect of cycling, storage, temperature, and surface film forming additives10.1016/S0013-4686(02)00417-6 ↗
27. Safety and capacity retention of lithium ion cells after long period of storage10.1023/A:1003992027121 ↗
28. Effects of anode active materials to the storage-capacity fading on commercial lithium-ion batteries10.1016/j.jpowsour.2007.06.169 ↗
29. Influence of the PVDF binder on the stability of LiCoO2 electrodes10.1016/j.elecom.2005.09.010 ↗
30. Analysis of the chemical composition of the passive film on Li-ion battery anodes using attentuated total reflection infrared spectroscopy10.1149/1.1575594 ↗
31. Mechanism of calendar life fading of high temperature stored LiFePO4-based Li-ion cells
32. Capacity fading of the acid-treated lithium manganese oxides in high-temperature storage10.1016/S0378-7753(03)00395-1 ↗
33. Accelerated calendar and pulse life analysis of lithium-ion cells10.1016/S0378-7753(03)00193-9 ↗
34. A study of lithium ion batteries cycle aging by thermodynamics techniques10.1016/j.jpowsour.2013.08.053 ↗
35. Hexagonal to cubic spinel transformation in lithiated cobalt oxide : TEM investigation10.1149/1.1738677 ↗
36. Phase diagrams of lithium transition metal oxides: investigations from first principles10.1016/S0013-4686(99)00199-1 ↗
37. Enhancing the electrochemical performance of a high-voltage LiCoO2 cathode with a bifunctional electrolyte additive10.1021/acsaem.1c02593 ↗
38. Unsymmetrical fluorinated malonatoborate as an amphoteric additive for high-energy-density lithium-ion batteries10.1039/C8EE00372F ↗
39. Outstanding electrochemical performance of high-voltage LiNi1/3Co1/3Mn1/3O2 cathode achieved by application of LiPO2F2 electrolyte additive, Electrochim
40. Toward a stable solid-electrolyte-interfaces on nickel-rich cathodes: LiPO2F2 salt-type additive and its working mechanism for LiNi0.5Mn0.25Co0.25O2 cathodes10.1016/j.jpowsour.2018.01.041 ↗
41. Surface film formation on electrodes in a LiCoO2/graphite cell:A step by step XPS study10.1016/j.jpowsour.2007.06.033 ↗
42. Research on the storage performance of lithium-ion battery at different temperature
43. Enabling stable high-voltage LiCoO2 operation by using synergetic interfacial modification strategy