Performance evaluation and off-design strategy of a high temperature proton exchange membrane fuel cell turbine-less hybrid system for low pressure ratio and Mach number aircraft
Source abstract
Abstract
The aviation industry is moving towards low-carbon and environment-friendly electric propulsion. This paper presents for the first time a high temperature proton exchange membrane fuel cell turbine-less hybrid system for low pressure ratio and Mach number aircraft. It is a new electric propulsion engine in which a plate reformer is used to supply hydrogen to the fuel cell. To investigate its performance and off-design strategies, thermodynamic, exergetic and exergoeconomic analyses models are established. Firstly, the thermodynamic performance is described and compared with that of a turbojet. Then, exergetic and exergoeconomic performances are revealed. Finally, the impact and comparison of four off-design strategies are studied in detail. The results show that the system can reduce specific fuel consumption by 24.90%. The burner, core nozzle and high temperature proton exchange membrane fuel cell need further development due to their low exergy efficiencies and high irreversibility ratios. The system has an exergoeconomic factor of 11.32%, relative cost difference of 24.65%, carbon dioxide mass specific emissions of 2.70 kg/(kW·h), and total system cost of 82.50 $/h. Strategy 2 is an economic option as it produces the minimum of specific fuel consumption, carbon dioxide mass specific emissions and total system cost.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Aircraft Design and Technologies · Thermodynamic and Exergetic Analyses of Power and Cooling Systems · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Design and development of a fuel cell-powered small unmanned aircraft10.1016/j.ijhydene.2011.09.051 ↗
2. Aerospace applications of hydrogen and fuel cells
3. Hydrogen fuel cell propulsion for long endurance small UAVs
4. The ion tiger fuel cell unmanned air vehicle
5. Lockheed Martin ruggedized UAS uses AMI fuel cell power
6. A fuel cell powered unmanned aerial vehicle for low altitude surveillance missions10.1016/j.ijhydene.2017.01.137 ↗
7. Ly · 2010
8. Comparative performance analysis of solid oxide fuel cell turbine-less jet engines for electric propulsion airplanes: application of alternative fuel10.1016/j.ast.2019.07.019 ↗
9. Thermodynamics analysis of a turbojet engine integrated with a fuel cell and steam injection for high-speed flight10.1016/j.energy.2019.07.016 ↗
10. Determination of the safe operation zone for a turbine-less and solid oxide fuel cell hybrid electric jet engine on unmanned aerial vehicles10.1016/j.energy.2020.117532 ↗
11. Performance characteristics of a solid oxide fuel cell hybrid jet engine under different operating modes10.1016/j.ast.2020.106027 ↗
12. Multi-objective optimization for an integrated renewable, power-to-gas and solid oxide fuel cell/gas turbine hybrid system in microgrid10.1016/j.energy.2020.118804 ↗
13. Development of dynamic modeling tools for solid oxide and molten carbonate hybrid fuel cell gas turbine systems
14. The hybrid solid oxide fuel cell (SOFC) and gas turbine (GT) systems steady state modeling10.1016/j.ijhydene.2012.03.005 ↗
15. Full and part load exergetic analysis of a hybrid micro gas turbine fuel cell system based on existing components10.1016/j.enconman.2012.04.004 ↗
16. Part load operation of SOFC/GT hybrid systems: stationary analysis10.1016/j.ijhydene.2012.08.015 ↗
17. Performance analysis for the part-load operation of a solid oxide fuel cell–micro gas turbine hybrid system10.1016/j.energy.2009.06.035 ↗
18. Liquid fuel utilization in SOFC hybrid systems10.1016/j.apenergy.2008.12.023 ↗
19. Performance analysis of hybrid solid oxide fuel cell and gas turbine cycle (part I): effects of fuel composition on output power10.1016/j.joei.2014.02.002 ↗
20. Performance analysis of the SOFC-MGT hybrid system with gasified biomass fuel10.1016/j.jpowsour.2007.08.102 ↗
21. Empirical modeling of proton exchange membrane fuel cell performance using universal approximation theory of fuzzy system
22. Proton transfer mechanism in perfluorinated sulfonic acid polytetrafluoroethylene10.1016/j.ijhydene.2012.05.096 ↗
23. Effects of conducting channels microstructure in proton exchange membrane on the performance of fuel cells
24. Hybrid energy storage system for unmanned aerial vehicle (UAV)
25. Development of lightweight 200‐W direct methanol fuel cell system for unmanned aerial vehicle applications and flight demonstration10.1002/fuce.201300244 ↗
26. Flight test validation of the dynamic model of a fuel cell system for ultra-light aircraft
27. Use of fuel cell stacks to achieve high altitudes in light unmanned aerial vehicles10.1016/j.ijhydene.2015.02.071 ↗
28. Design and manufacture of a high-temperature PEMFC and its cooling system to power a lightweight UAV for a high altitude mission10.1016/j.ijhydene.2015.12.209 ↗
29. Analysis of the performance of a passive hybrid powerplant to power a lightweight unmanned aerial vehicle for a high altitude mission10.1016/j.jpowsour.2017.04.090 ↗
30. Recent advances in polybenzimidazole/phosphoric acid membranes for high‐temperature fuel cells10.1002/pi.4708 ↗
31. H2 production with low carbon content via MSR in packed bed membrane reactors for high-temperature polymeric electrolyte membrane fuel cell10.1016/j.apenergy.2016.12.015 ↗
32. Shekhawat · 2011
33. Wang · 2019
34. About simplifications in gas turbine performance calculations
35. Matching and performance analysis of a solid oxide fuel cell turbine-less hybrid electric propulsion system on aircraft10.1016/j.energy.2022.125655 ↗
36. Nancy · 2015
37. Influence of fuel reforming with low water to carbon ratio on thermodynamic performance of aviation solid oxide fuel cell-gas turbine hybrid system10.1016/j.jpowsour.2022.231978 ↗
38. Ecological performance optimization of a high temperature proton exchange membrane fuel cell10.3390/math9121332 ↗
39. Finite time thermodynamic modeling and performance analysis of high-temperature proton exchange membrane fuel cells10.3390/ijms23169157 ↗
40. A novel triple-cycle system based on high-temperature proton exchange membrane fuel cell, thermoelectric generator, and thermally regenerative electrochemical refrigerator for power and cooling cogeneration10.1002/er.7658 ↗
41. Power optimization of a combined power system consisting of a high-temperature polymer electrolyte fuel cell and an organic Rankine cycle system10.1016/j.energy.2016.07.093 ↗
42. Performance of a hybrid system consisting of a high-temperature polymer electrolyte fuel cell and an absorption refrigerator10.1016/j.energy.2017.11.129 ↗
43. Mathematical model of a PEMFC using a PBI membrane10.1016/j.enconman.2005.08.002 ↗
44. Degradation modeling and operational optimization for improving the lifetime of high-temperature PEM (proton exchange membrane) fuel cells10.1016/j.energy.2013.08.053 ↗
45. A novel distributed energy system using high-temperature proton exchange membrane fuel cell integrated with hybrid-energy heat pump10.1016/j.enconman.2021.113990 ↗
46. Performance analyses of a combined system consisting of high-temperature polymer electrolyte membrane fuel cells and thermally regenerative electrochemical cycles10.1016/j.energy.2019.116720 ↗
47. Parametric study of the morphological proprieties of HT-PEMFC components for effective membrane hydration10.1149/1.3569711 ↗
48. Performance evaluation of an integrated high-temperature proton exchange membrane fuel cell and absorption cycle system for power and heating/cooling cogeneration10.1016/j.enconman.2018.12.024 ↗
49. Conductivity of PBI membranes for high-temperature polymer electrolyte fuel cells10.1149/1.1630037 ↗
50. Hydrogen production with integrated microchannel fuel processor using methanol for portable fuel cell systems10.1016/j.cattod.2005.09.016 ↗
51. Silicon-based miniaturized reformer with methanol catalytic burner10.1016/j.cej.2007.11.037 ↗
52. MEMS fuel cell system integrated with a methanol reformer for a portable power source10.1016/j.sna.2008.07.010 ↗
53. Experimental study on the hydrogen production of integrated methanol-steam reforming reactors for PEM fuel cells10.1016/j.ijthermalsci.2011.03.001 ↗
54. Experiments on hydrogen production from methanol steam reforming in the microchannel reactor10.1016/j.ijhydene.2012.06.027 ↗
55. Exergetic, exergoeconomic and exergoenvironmental analyses of a hybrid combined locomotive powering system for rail transportation10.1016/j.enconman.2021.114619 ↗
56. SPECO: a systematic and general methodology for calculating efficiencies and costs in thermal systems10.1016/j.energy.2005.03.011 ↗
57. Exergetic assessment of a newly designed solid oxide fuel cell-based system combined with a propulsion engine10.1016/j.energy.2021.122314 ↗
58. Exergoeconomic analysis and optimization of a novel hybrid cogeneration system: high-temperature proton exchange membrane fuel cell/Kalina cycle, driven by solar energy10.1016/j.enconman.2019.03.037 ↗
59. Exergoeconomic optimization and environmental analysis of a novel solar-trigeneration system for heating, cooling and power production purpose10.1016/j.solener.2016.04.046 ↗
60. Modeling and parametric study of a methanol reformate gas-fueled HT-PEMFC system for portable power generation applications10.1016/j.enconman.2015.05.004 ↗
61. Control and experimental characterization of a methanol reformer for a 350 W high temperature polymer electrolyte membrane fuel cell system10.1016/j.ijhydene.2012.09.032 ↗