journal article·2023-02Open access

A cationic polymeric interface enabling dendrite-free and highly stable aqueous Zn-metal batteries

Qiaohui Duan, Kaiming Xue, Xin Yin, Denis Y.W. Yu

Abstract

Recently, aqueous rechargeable zinc-ion batteries (AZIBs) have attracted much attention owing to their low cost and intrinsic safety. However, the reversibility of AZIBs is limited by dendrite growth on the Zn anode, which leads to low Coulombic efficiency and potential short circuit during cycling. Herein, we develop a new strategy using electrostatic shielding to enable a highly reversible Zn anode. Specifically, a cationic polymeric ionic liquid (PIL) coating layer with a strong positive charge evens out the charge distribution on the surface of the Zn electrode, enabling uniform stripping and deposition of Zn. As a result, a symmetric Zn–Zn cell can sustain stripping-plating for over 2000 h at 1 mA cm −2 with a capacity limit of 1 mAh cm −2 , far exceeding the performance of bare Zn electrode. A highly reversible Zn stripping-plating on Cu substrate is also achieved with an average coulombic efficiency of 99.5% over 1100 cycles. PILZ layer can even allow a uniform Zn deposition of up to 30 μm thick, allowing large utilization of the Zn foil. Moreover, the coating layer enables the stable cycling of a MnO 2 –Zn full cell with a high areal capacity of 1 mAh cm −2 .
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced battery technologies research · Advanced Battery Materials and Technologies · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Deeply understanding the Zn anode behaviour and corresponding improvement strategies in different aqueous Zn-based batteries10.1039/D0EE02162H ↗
2. Roadmap for advanced aqueous batteries: from design of materials to applications10.1126/sciadv.aba4098 ↗
3. Recent progress of rechargeable batteries using mild aqueous electrolytes10.1002/smtd.201800272 ↗
4. Design strategies for high‐energy‐density aqueous zinc batteries10.1002/anie.202200598 ↗
5. Aqueous rechargeable multivalent metal‐ion batteries: advances and challenges10.1002/aenm.202100608 ↗
6. Strategies for the stabilization of Zn metal anodes for Zn‐ion batteries
7. Strategies for dendrite‐free anode in aqueous rechargeable zinc ion batteries10.1002/aenm.202001599 ↗
8. Do zinc dendrites exist in neutral zinc batteries: a developed electrohealing strategy to in situ rescue in‐service batteries10.1002/adma.201903778 ↗
9. A Review on 3D zinc anodes for zinc ion batteries
10. Electrolyte additive engineering for aqueous Zn ion batteries10.1016/j.ensm.2022.07.017 ↗
11. Interfacial engineering strategy for high-performance Zn metal anodes
12. Zincophilic 3D ZnOHF nanowire arrays with ordered and continuous Zn2+ Ion modulation layer enable long-term stable Zn metal anodes10.1016/j.ensm.2022.04.006 ↗
13. Highly reversible zinc metal anode for aqueous batteries10.1038/s41563-018-0063-z ↗
14. Hydrogen‐free and dendrite‐free all‐solid‐state Zn‐ion batteries10.1002/adma.201908121 ↗
15. “Water-in-deep eutectic solvent” electrolytes enable zinc metal anodes for rechargeable aqueous batteries10.1016/j.nanoen.2018.12.086 ↗
16. Reversible epitaxial electrodeposition of metals in battery anodes10.1126/science.aax6873 ↗
17. Long-life and deeply rechargeable aqueous Zn anodes enabled by a multifunctional brightener-inspired interphase10.1039/C9EE00596J ↗
18. Pyrrolidinium-based polymeric ionic liquids as mechanically and electrochemically stable polymer electrolytes10.1016/j.jpowsour.2008.11.115 ↗
19. Measuring surface zeta potential using phase analysis light scattering in a simple dip cell arrangement10.1016/j.colsurfa.2011.12.065 ↗
20. A cation-tethered flowable polymeric interface for enabling stable deposition of metallic lithium10.1021/jacs.0c09649 ↗
21. Polymeric ionic liquid-poly(ethylene glycol) composite polymer electrolytes for high-temperature lithium-ion batteries10.1002/celc.201700984 ↗
22. Stabilizing zinc anodes by regulating the electrical double layer with saccharin anions10.1002/adma.202100445 ↗
23. Effect of ethanol and urea as solvent additives on PSS–PDADMA polyelectrolyte complexation10.1021/acs.macromol.1c02533 ↗
24. Tailoring membrane surface charges: a novel study on electrostatic interactions during membrane fouling10.3390/polym7101497 ↗
25. Highly stable plating/stripping behavior of zinc metal anodes in aqueous zinc batteries regulated by quaternary ammonium cationic salts10.1002/celc.202001426 ↗
26. Toward practical high‐areal‐capacity aqueous zinc‐metal batteries: quantifying hydrogen evolution and a solid‐ion conductor for stable zinc anodes
27. Critical current density in solid‐state lithium metal batteries: mechanism, influences, and strategies