RETRACTED: Effect of air inlet and outlet cross sections on the cooling system of cylindrical lithium battery with segmental arrangement utilized in electric vehicles
This record is marked as retracted by the source. Review the publisher’s notice before using its findings.
Source abstract
Abstract
This paper examines a three-dimensional analysis of the temperature of a battery pack (BYK) with 16 lithium-ion cylindrical batteries. Battery cells (BYC) placed in four rows in a segmental configuration in the BYK are cooled by a laminar airflow. The air inlet and outlet are located at the top and bottom of the pack, respectively. The effect of inlet and outlet dimensions on BYK temperature and air temperature (T-Air) is examined in this research. COMSOL Multiphysics software is used to simulate the BYK, and the FEM is employed to solve the equations. The results demonstrate that the impact of the inlet on the temperature of the batteries (T-BT) is much more than the outlet, which is due to the change in air velocity (V-Air) in the pack. An increment in the inlet causes the maximum (MXT) (1.56°) and average temperature (AVT) of the BYK (3.01°) to decrease. The dimensions of the inlet affect the AVT of the battery from the initial time. Larger air outlets slightly enhance the MXT and AVT of the BYK. Enhancing the inlet reduces the outlet T-Air. The BYCs located in the middle of the BYK need more cooling since they have a MXT.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Electric Vehicles and Infrastructure · Electric and Hybrid Vehicle Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Reducing CO2 emissions in OECD countries: do renewable and nuclear energy matter?10.1016/j.pnucene.2020.103425 ↗
2. Review of passive PCM latent heat thermal energy storage systems towards buildings' energy efficiency10.1016/j.enbuild.2012.12.042 ↗
3. A review on applying ventilated double-skin facade to buildings in hot-summer and cold-winter zone in China10.1016/j.rser.2009.11.017 ↗
4. Influences of wire diameters on output power in electromagnetic energy harvester
5. Investigating the output performance of triboelectric nanogenerators with single/double-sided interlayer10.1016/j.nanoen.2022.107448 ↗
6. Influence of temperature difference on performance of solid-liquid triboelectric nanogenerators10.1016/j.nanoen.2022.107431 ↗
7. Performance comparison of electromagnetic generators based on different circular magnet arrangements
8. Hierarchical polygon Co3O4 flakes/N, O-dual doped porous carbon frameworks for flexible hybrid supercapacitors
9. Large-scale pavement roughness measurements with vehicle crowdsourced data using semi-supervised learning10.1016/j.trc.2021.103048 ↗
10. Macroscopic modeling and dynamic control of on-street cruising-for-parking of autonomous vehicles in a multi-region urban road network10.1016/j.trc.2021.103176 ↗
11. Thermal runaway evaluation and thermal performance enhancement of a lithium-ion battery coupling cooling system and battery sub-models10.1016/j.applthermaleng.2021.117884 ↗
12. Numerical analysis of lithium-ion battery thermal management system using phase change material assisted by liquid cooling method10.1016/j.ijheatmasstransfer.2021.122095 ↗
13. A lightweight and low-cost liquid-cooled thermal management solution for high energy density prismatic lithium-ion battery packs10.1016/j.applthermaleng.2021.117871 ↗
14. A multi-state model for transmission system resilience enhancement against short-circuit faults caused by extreme weather events10.1109/TPWRD.2020.3043938 ↗
15. Allocation of centrally switched fault current limiters enabled by 5G in transmission system10.1109/TPWRD.2020.3037193 ↗
16. Flexible interface design for stress regulation of a silicon anode toward highly stable dual-ion batteries
17. Fast rate and long life potassium-ion based dual-ion battery through 3D porous organic negative electrode10.1002/adfm.202001440 ↗
18. Polymer dielectric films exhibiting superior high-temperature capacitive performance by utilizing an inorganic insulation interlayer10.1039/D1MH01918J ↗
19. A novel potassium-ion-based dual-ion battery10.1002/adma.201700519 ↗
20. Cooling of non-sloped, positively sloped, and negatively sloped arrangements of Li-ion batteries with a phase change material connected to a solar system10.1016/j.est.2022.104808 ↗
21. Effect of combined air cooling and nano enhanced phase change materials on thermal management of lithium-ion batteries10.1016/j.est.2022.104906 ↗
22. Combining an active method and a passive method in cooling lithium-ion batteries and using the generated heat in heating a residential unit10.1016/j.est.2022.104181 ↗
23. Investigation of mixed convection of non-Newtonian fluid in the cooling process of lithium-ion battery with different outlet position10.1016/j.est.2021.103621 ↗
24. Research on microscale skull grinding temperature field under different cooling conditions10.1016/j.applthermaleng.2017.07.183 ↗
25. Synthesis, stability, density, viscosity of ethylene glycol-based ternary hybrid nanofluids: experimental investigations and model -prediction using modern machine learning techniques10.1016/j.powtec.2022.117190 ↗
26. Thermophysical properties using ND/water nanofluids: an experimental study, ANFIS-based model and optimization
27. Energy, exergy, economic and environmental (4E) analysis of a parabolic trough solar collector using MXene based silicone oil nanofluids10.1016/j.solmat.2022.111633 ↗
28. Vegetable oil-based nanofluid minimum quantity lubrication turning: academic review and perspectives10.1016/j.jmapro.2020.09.044 ↗
29. Heat dissipation analysis of different flow path for parallel liquid cooling battery thermal management system10.1002/er.5089 ↗
30. Experimental investigation on EV battery cooling and heating by heat pipes10.1016/j.applthermaleng.2014.09.083 ↗
31. Influence of operating conditions on the optimum design of electric vehicle battery cooling plates10.1016/j.jpowsour.2013.06.114 ↗
32. Design of the structure of battery pack in parallel air-cooled battery thermal management system for cooling efficiency improvement10.1016/j.ijheatmasstransfer.2018.12.024 ↗
33. Research on the heat dissipation performance of battery pack based on forced air cooling10.1016/j.jpowsour.2013.03.004 ↗
34. Parametric investigation on the performance of a direct evaporation cooling battery thermal management system10.1016/j.ijheatmasstransfer.2022.122685 ↗
35. Investigation of passive method in thermal management of lithium-ion batteries at different discharge rates by changing the number of cavities containing phase change materials10.1016/j.est.2022.104758 ↗
36. The estimation of temperature distribution in cylindrical battery cells under unknown cooling conditions10.1109/TCST.2014.2309492 ↗
37. Investigation on the promotion of temperature uniformity for the designed battery pack with liquid flow in cooling process10.1016/j.applthermaleng.2017.01.069 ↗
38. Numerical modeling and experimental investigation of a prismatic battery subjected to water cooling10.1080/10407782.2016.1277938 ↗
39. Cross-scene pavement distress detection by a novel transfer learning framework10.1111/mice.12674 ↗
40. ESTNet: embedded spatial-temporal network for modeling traffic flow dynamics
41. Effect of an impinging jet on the flow characteristics and thermal performance of mainstream in battery cooling of hybrid electric vehicles10.1016/j.ijheatmasstransfer.2021.122206 ↗
42. Rapid sintering method for highly conductive Li7La3Zr2O12 ceramic electrolyte10.1016/j.ceramint.2020.01.106 ↗
43. Highly disordered VO2 films: appearance of electronic glass transition and potential for device-level overheat protection
44. Engineering hierarchical porous S-doped Defective nickel Cobaltite/carbon hybrids to boost efficient asymmetric electrochemical capacitor
45. Activated metal-organic frameworks (a-MIL-100 (Fe)) as fillers in polymer electrolyte for high-performance all-solid-state lithium metal batteries
46. Metal-organic framework-based solid-state electrolytes for all solid-state lithium metal batteries: a review10.1039/D2CE00663D ↗
47. Unusual size effect in ion and charge transport in micron-sized particulate aluminum anodes of lithium-ion batteries
48. Economic cost and technical efficiency analysis of thermal management of a triple pack of lithium-ion battery with forced airflow and nano-phase change materials10.1016/j.jpowsour.2022.231715 ↗
49. The effect of the zigzag arrangement of lithium-ion batteries inside the air duct of an office building for heating and evaluation of the impact of the number of air outlets in different seasons of the year10.1016/j.est.2022.104204 ↗
50. Utilization of a solar system to charge lithium-ion batteries and using the heat generated in an in-line lithium-ion battery to heat a guard room10.1016/j.est.2022.104134 ↗
51. Investigation of the use of extended surfaces in paraffin wax phase change material in thermal management of a cylindrical lithium-ion battery: applicable in the aerospace industry10.1016/j.est.2021.103685 ↗
52. A study of nanoparticle shape in water/alumina/boehmite nanofluid flow in the thermal management of a lithium-ion battery under the presence of phase-change materials10.1016/j.jpowsour.2022.231522 ↗
53. A general energy balance for battery systems10.1149/1.2113792 ↗
54. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
55. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
56. Heat-generation rate and general energy balance for insertion battery systems10.1149/1.1837884 ↗
57. Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: a comparative analysis between aligned and staggered cell arrangements10.1016/j.applthermaleng.2015.01.049 ↗