Inhibition of Gas-evolved electrolyte decomposition in cylindrical Li-ion battery cells of Ni-rich layered oxide with a dry coating process without post thermal annealing
Source abstract
Abstract
Although Ni-rich layered oxide materials widely used as the cathode of lithium-ion batteries (LIBs) possess several interesting properties e.g., high energy density, they encounter severe capacity degradation and intrinsic poor thermal stability concerning the Ni-concentration. Herein, a core-shell-like architecture has been achieved by employing the cost-effective dry particle fusion method without an energy-consuming thermal annealing process with alumina (Al 2O 3 ) nanoparticles over LiNi 0.8Mn 0.1Co 0.1O 2 or NMC811 and resulting in an intact layer with an average shell thickness of 150–200 nm. Such NMC811@ Al 2O 3 core-shell exhibits excellent cycling stability compared with pristine NMC811. The chemical lithium diffusion coefficient, as calculated from a galvanostatic intermittent titration technique (GITT) infers that the introduction of Al 2O 3 coating slightly reduces the lithium diffusivity; however, it limits the active material dissolution, as perceived from post-ICP-OES analysis of the counter electrode. Besides, such modified systems exhibit a significant delay in onset potential related to surface layer decomposition and lattice oxygen release. Therefore, the present investigation concludes that the Al 2O 3 shell in the NMC811@ Al 2O 3 not only offers superior electrochemical performance but also exhibits good thermal stability. It could achieve thru a cost-effective and scalable dry-fusion method.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Phase behavior during electrochemical cycling of Ni-rich cathode materials for Li-ion batteries10.1002/aenm.202003404 ↗
3. Review—Li-Rich layered oxide cathodes for next-generation Li-ion batteries: chances and challenges10.1149/2.0111514jes ↗
4. Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries10.1038/s41560-018-0191-3 ↗
5. Stabilizing and understanding the interface between nickel-rich cathode and PEO-based electrolyte by lithium niobium oxide coating for high-performance all-solid-state batteries10.1016/j.nanoen.2020.105107 ↗
6. Bisalt ether electrolytes: a pathway towards lithium metal batteries with Ni-rich cathodes10.1039/C8EE02601G ↗
7. Dual-functional interfaces for highly stable Ni-rich layered cathodes in sulfide all-solid-state batteries10.1016/j.ensm.2020.01.009 ↗
8. Significantly improving cycling performance of cathodes in lithium ion batteries: the effect of Al2O3 and LiAlO2 coatings on LiNi0.6Co0.2Mn0.2O210.1016/j.nanoen.2017.11.010 ↗
9. A novel organic “Polyurea” thin film for ultralong-life lithium-metal anodes via molecular-layer deposition10.1002/adma.201806541 ↗
10. Core-shell Ni-rich NMC-Nanocarbon cathode from scalable solvent-free mechanofusion for high-performance 18650 Li-ion batteries10.1016/j.ensm.2021.01.032 ↗
11. Tungsten infused grain boundaries enabling universal performance enhancement of Co-free Ni-rich cathode materials10.1149/1945-7111/ac3c26 ↗
12. Differential electrochemical mass spectrometer cell design for online quantification of products produced during electrochemical reduction of CO210.1021/acs.analchem.5b02080 ↗
13. An overview of Cu-based heterogeneous electrocatalysts for CO2 reduction10.1039/C9TA11778D ↗
14. Oxygen release and its effect on the cycling stability of LiNi x Mn y Co z O 2 (NMC) cathode materials for Li-ion batteries10.1149/2.0021707jes ↗
15. Li2CO3 decomposition in Li-ion batteries induced by the electrochemical oxidation of the electrolyte and of electrolyte impurities10.1016/j.electacta.2020.136271 ↗
16. High-performance Li-ion batteries using nickel-rich lithium nickel cobalt aluminium oxide–nanocarbon core–shell cathode: in operando X-ray diffraction10.1021/acsami.9b06553 ↗
17. Combination effect of bulk structure change and surface rearrangement on the electrochemical kinetics of LiNi0.80Co0.15Al0.05O2 during initial charging processes10.1021/acsami.8b15131 ↗
18. Facile dry coating method of high-nickel cathode material by nanostructured fumed alumina (Al2O3) improving the performance of lithium-ion batteries10.1002/ente.202100028 ↗
19. Synthesis of LiNi1/3Co1/3Mn1/3O2 cathode material by a modified sol–gel method for lithium-ion battery10.1007/s10971-013-3148-9 ↗
20. Prelithiated perfluoro-ionomer as an alternative binder for the state-of-the-art Ni-rich LiNi0.8Co0.15Al0.05O2 cathode of next-generation lithium-ion batteries10.1039/D0TA04999A ↗
21. Nanoscale LiNi0.5Co0.2Mn0.3O2 cathode materials for lithium ion batteries via a polymer-assisted chemical solution method10.1016/j.apmt.2019.06.008 ↗
22. A reflection on lithium-ion battery cathode chemistry10.1038/s41467-020-15355-0 ↗
23. Transition metal dissolution and degradation in nmc811-graphite electrochemical cells10.1149/1945-7111/ac0359 ↗
24. Lithium-ion cathode/coating Pairs for transition metal containment10.1149/2.1101609jes ↗
25. Atomic to nanoscale investigation of functionalities of an Al2O3 coating layer on a cathode for enhanced battery performance10.1021/acs.chemmater.5b04301 ↗
26. Oxygen release and its effect on the cycling stability of LiNi x Mn y Co z O 2 (NMC) cathode materials for Li-ion batteries10.1149/2.0021707jes ↗
27. Origin of carbon dioxide evolved during cycling of nickel-rich layered NCM cathodes10.1021/acsami.8b13158 ↗
28. Chemical versus electrochemical electrolyte oxidation on NMC111, NMC622, NMC811, LNMO, and conductive carbon10.1021/acs.jpclett.7b01927 ↗