journal article·2022-10Open access

Understanding the effect of salt concentrations on fast charging performance of Li-ion cells

Xianyang Wu, Lin Ma, Jue Liu, Kejie Zhao, David L. Wood, Zhijia Du

Abstract

Different lithium salt (lithium bis(fluorosulfonyl) imide (LiFSI)/LiPF 6 9/1 mol ratio) concentrations in carbonate electrolyte were studied on the fast charging performance of LiNi 0.6Mn 0.2Co 0.2O 2 (NMC622)/graphite pouch cells. The cells with electrolyte concentration from 0.75 M to 1.50 M showed similar fast charging capabilities. Further increase of the concentration to 1.75 M and 2.00 M decreased the attainable capacity in fast charging. In the long-term cycling test, the capacity retention after 200 fast charging cycles increased with the increase of salt concentration in electrolyte. Cells with 1.5 M electrolyte showed the best overall performance in fast charging capacity and long-term cycling. Li platings were observed in the cells with 0.75 M, 1.00 M and 1.25 M electrolyte. It was improved with greatly reduced Li plating area in 1.50 M, and no Li plating at all in 1.75 M and 2.00 M electrolyte. Post-mortem analysis such as neutron powder diffraction (NPD) and X-ray photoelectron spectroscopy (XPS) were used to characterize the electrode after cycling. It suggests that electrolyte concentration needs to be optimized for a given cell configuration with specific electrode and loading.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Enabling fast charging – a battery technology gap assessment10.1016/j.jpowsour.2017.06.055 ↗
2. Understanding limiting factors in thick electrode performance as applied to high energy density Li-ion batteries10.1007/s10800-017-1047-4 ↗
3. In situ detection of lithium metal plating on graphite in experimental cells10.1016/j.jpowsour.2015.01.046 ↗
4. Study of the charging process of a LiCoO2-based Li-ion battery10.1016/j.jpowsour.2006.02.087 ↗
5. In-Situ detection of lithium plating using high precision coulometry10.1149/2.0621506jes ↗
6. Electrolyte design for fast-charging Li-ion batteries10.1016/j.trechm.2020.01.011 ↗
7. Enabling fast charging of high energy density Li-ion cells with high lithium ion transport electrolytes10.1016/j.elecom.2019.04.013 ↗
8. Effects of solvent formulations in electrolytes on fast charging of Li-ion cells10.1016/j.electacta.2020.136453 ↗
9. Requirements for enabling extreme fast charging of high energy density Li-ion cells while avoiding lithium plating10.1149/2.0451908jes ↗
10. Newman · 2004
11. Study of the corrosion behavior of LiFSI based electrolyte for Li-ion cells, Electrochem
12. Transport properties of LiPF[sub 6]-based Li-ion battery electrolytes10.1149/1.1872737 ↗
13. A systematic study of the concentration of lithium hexafluorophosphate (LiPF6) as a salt for LiCoO2/graphite pouch cells10.1149/2.0611409jes ↗
14. Effect of LiPF6 concentration in Li[Ni0.4Mn0.4Co0.2]O2/graphite pouch cells operated at 4.5 V10.1016/j.jpowsour.2015.09.090 ↗
15. Modeling the electrochemical behaviors of charging Li-ion batteries with different initial electrolyte salt concentrations10.1002/er.3502 ↗
16. Dramatic effects of low salt concentrations on Li-ion cells containing EC-free electrolytes10.1149/2.1381709jes ↗
17. TOPAS and TOPAS-Academic: an optimization program integrating computer algebra and crystallographic objects written in C++10.1107/S1600576718000183 ↗
18. Change of conductivity with salt content, solvent composition, and temperature for electrolytes of LiPF[sub 6] in ethylene carbonate-ethyl methyl carbonate10.1149/1.1403730 ↗
19. Conductivity and solvation of Li + ions of LiPF 6 in propylene carbonate solutions10.1021/jp000142f ↗
20. A study of the physical properties of Li-ion battery electrolytes containing esters10.1149/2.0271802jes ↗
21. Conductivity and viscosity of PC-DEC and PC-EC solutions of LiPF[sub 6]10.1149/1.1566019 ↗
22. Correlating microstructural lithium metal growth with electrolyte salt depletion in lithium batteries using 7Li MRI10.1021/jacs.5b09385 ↗
23. The electrochemical behavior of alkali and alkaline earth metals in nonaqueous battery systems—the solid electrolyte interphase model10.1149/1.2128859 ↗
24. A high precision coulometry study of the SEI growth in Li/graphite cells10.1149/1.3557892 ↗
25. Optimizing areal capacities through understanding the limitations of lithium-ion electrodes10.1149/2.0321602jes ↗
26. Modeling of lithium plating induced aging of lithium-ion batteries: transition from linear to nonlinear aging10.1016/j.jpowsour.2017.05.110 ↗
27. New insight into structural transformation in Li-rich layered oxide during the initial charging10.1039/C5TA01849H ↗
28. Anionic redox induced anomalous structural transition in Ni-rich cathodes10.1039/D1EE02987H ↗
29. The reaction of lithium with dimethyl carbonate and diethyl carbonate in ultrahigh vacuum studied by X-ray photoemission spectroscopy10.1021/la980454y ↗
30. Surface film formation on electrodes in a LiCoO2/graphite cell: a step by step XPS study10.1016/j.jpowsour.2007.06.033 ↗
31. Composition and growth behavior of the surface and electrolyte decomposition layer of/on a commercial lithium ion battery LixNi 1/3Mn1/3Co1/3O2 cathode determined by sputter depth profile X-ray photoelectron spectroscopy10.1021/la403276p ↗
32. A mechanical aging mechanism in lithium-ion batteries10.1149/2.1001410jes ↗
33. Post-mortem analysis of inhomogeneous induced pressure on commercial lithium-ion pouch cells and their effects10.3390/su11236738 ↗