The effect of using non-Newtonian nanofluid on pressure drop and heat transfer in a capillary cooling system connected to a pouch lithium-ion battery connected to a solar system
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Battery Technologies Research · Photovoltaic System Optimization Techniques · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (96)
Show source-provided references
1. Thermal management of cylindrical power battery module for extending the life of new energy electric vehicles10.1016/j.applthermaleng.2015.04.012 ↗
2. Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage10.1038/s41557-018-0045-4 ↗
3. Molecular grafting towards high-fraction active nanodots implanted in N-doped carbon for sodium dual-ion batteries
4. Modeling efforts in the key areas of thermal management and safety of lithium ion battery cells: a mini review10.1002/apj.1999 ↗
5. A comprehensive review of future thermal management systems for battery-electrified vehicles10.1016/j.est.2020.101551 ↗
6. Comparison of different cooling methods for lithium ion battery cells10.1016/j.applthermaleng.2015.10.015 ↗
7. Analysis of the unsteady thermal response of a Li-ion battery pack to dynamic loads10.1016/j.energy.2021.120947 ↗
8. Lithium-ion battery thermal management system with Al2O3/AgO/CuO nanofluids and phase change material10.1016/j.applthermaleng.2020.115840 ↗
9. Development of hybrid cooling method with PCM and Al2O3 nanofluid in aluminium minichannels using heat source model of Li-ion batteries10.1016/j.applthermaleng.2020.115543 ↗
10. Retraction notice to “Battery thermal management with conjugate heat transfer in heat sink with Fe3O4/CNT-water nanofluid using lattice Boltzmann/finite volume method” [CEP 146 (2019) 107708]10.1016/j.cep.2020.108020 ↗
11. Molecular dynamics investigation of electric field altered behavior of lithium ion battery electrolytes10.1016/j.molliq.2019.112252 ↗
12. Effect of nano phase change materials on the cooling process of a triangular lithium battery pack
13. Combining an active method and a passive method in cooling lithium-ionbatteries and using the generated heat in heating a residential unit
14. Numerical investigation of the effect of inlet dimensions air duct and distance of battery packs for thermal management of three lithium-ion battery packs
15. Effect of inlet and outlet size, battery distance, and air inlet and outlet position on the cooling of a lithium-ion battery pack and utilizing outlet air of cooling system to heat an air handling unit
16. Using nanoparticles in solar collector to enhance solar-assisted hot process stream usefulness
17. Thermally driven flow of water in partially heated tall vertical concentric annulus10.3390/e22101189 ↗
18. Experimental and numerical analysis of heat transfer in a tall vertical concentric annular thermo-siphon at constant heat flux condition10.1080/01457632.2018.1446867 ↗
19. Aluminum-doping effects on three-dimensional Li3V2(PO4)3@C/CNTs microspheres for electrochemical energy storage
20. Superoxide radical-mediated self-synthesized Au/MoO3-x hybrids with enhanced peroxidase-like activity and photothermal effect for anti-MRSA therapy10.1021/acsami.1c23676 ↗
21. Evaluating the vulnerability of integrated electricity-heat-gas systems based on the high-dimensional random matrix theory
22. Biochar from waste biomass as hygroscopic filler for pervious concrete to improve evaporative cooling performance10.1016/j.conbuildmat.2021.123078 ↗
23. Experimental study of an OHP-cooled thermal management system for electric vehicle power battery10.1016/j.expthermflusci.2014.03.017 ↗
24. The effect of using phase change materials in a solar wall on the number of times of air conditioning per hour during day and night in different thicknesses of the solar wall
25. Fracture predictions based on a coupled chemo-mechanical model with strain gradient plasticity theory for film electrodes of Li-ion batteries10.1016/j.engfracmech.2021.107866 ↗
26. Design of Ti4+-doped Li3V2(PO4)3/C fibers for lithium energy storage10.1016/j.ceramint.2021.12.037 ↗
27. A novel aluminum-graphite dual-ion battery10.1002/aenm.201502588 ↗
28. Mainstream optimization strategies for cathode materials of sodium-ion batteries
29. High-k erbium oxide film prepared by sol-gel method for low-voltage thin-film transistor10.1088/1361-6528/abe439 ↗
30. A critical review of battery thermal performance and liquid based battery thermal management10.1016/j.enconman.2018.12.051 ↗
31. Reverse layered air flow for Li-ion battery thermal management10.1016/j.applthermaleng.2018.07.080 ↗
32. Biological porous carbon encapsulated polyethylene glycol-based phase change composites for integrated electromagnetic interference shielding and thermal management capabilities
33. Large-scale fabrication of flexible EPDM/MXene/PW phase change composites with excellent light-to-thermal conversion efficiency via water-assisted melt blending10.1016/j.compositesa.2021.106713 ↗
34. A hybrid thermal management system for lithium ion batteries combining phase change materials with forced-air cooling10.1016/j.apenergy.2015.03.080 ↗
35. The numerical investigation of nanofluid based cylinder battery thermal management using lattice Boltzmann method10.1016/j.ijheatmasstransfer.2015.07.128 ↗
36. Active (air-cooled) vs. passive (phase change material) thermal management of high power lithium-ion packs: limitation of temperature rise and uniformity of temperature distribution10.1016/j.jpowsour.2008.03.082 ↗
37. A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles10.1016/j.jpowsour.2013.03.102 ↗
38. Development and comparison of parametric models to predict global solar radiation: a case study for the southern region of Saudi Arabia10.1007/s10973-022-11209-7 ↗
39. A novel study to examine dependency of indoor temperature and PCM to reduce energy consumption in buildings
40. Annual energy analysis of a building equipped with CaCl2· 6H2O as PCM and CaCl2· 6H2O/CsxWO3 as nano PCM–Useless of adding nanoparticles10.1016/j.jobe.2022.104527 ↗
41. Lithium ion battery production10.1016/j.jct.2011.09.005 ↗
42. Experimental investigation of battery thermal management system for electric vehicle based on paraffin/copper foam10.1016/j.joei.2014.09.006 ↗
43. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
44. Techno-economic assessment and optimization of a hybrid renewable earth - air heat exchanger coupled with electric boiler, hydrogen, wind and PV configurations10.1016/j.renene.2019.10.169 ↗
45. A pore-scale assessment of the dynamic response of forced convection in porous media to inlet flow modulations10.1016/j.ijheatmasstransfer.2020.119657 ↗
46. On the unsteady forced convection in porous media subject to inlet flow disturbances-A pore-scale analysis10.1016/j.icheatmasstransfer.2020.104639 ↗
47. On the influences of surface heat release and thermal radiation upon transport in catalytic porous microreactors—a novel porous-solid interface model10.1016/j.cep.2019.107602 ↗
48. Numerical study on performance of double-fluid parabolic trough solar collector occupied with hybrid non-Newtonian nanofluids: Investigation of effects of helical absorber tube using deep learning10.1016/j.enganabound.2022.04.033 ↗
49. Numerical investigation and optimization of natural convection and entropy generation of alumina/H2O nanofluid in a rectangular cavity in the presence of a magnetic field with artificial neural networks10.1016/j.enganabound.2022.04.034 ↗
50. Challenging of using CuO nanoparticles in a flat plate solar collector- Energy saving in a solar-assisted hot process stream10.1016/j.jtice.2021.04.003 ↗
51. Thermal management of lithium‐ion batteries for electric vehicles10.1002/er.1956 ↗
52. Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy10.1016/j.jclepro.2016.10.073 ↗
53. Surface morphology assessment of CFRP transverse grinding using CNT nanofluid minimum quantity lubrication10.1016/j.jclepro.2020.123328 ↗
54. Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions10.1016/j.ceramint.2019.04.226 ↗
55. Numerical investigation of natural convection and irreversibilities between two inclined concentric cylinders in presence of uniform magnetic field and radiation
56. Influence of a membrane on nanofluid heat transfer and irreversibilities inside a cavity with two constant-temperature semicircular sources on the lower wall: applicable to solar collectors10.1088/1402-4896/ab93e4 ↗
57. Experimental studies on natural convection of water in a closed-loop vertical annulus10.1080/08916152.2015.1135202 ↗
58. Design and energy requirements of a photovoltaic-thermal powered water desalination plant for the Middle East10.3390/ijerph18031001 ↗
59. Incorporating nano-scale material in solar system to reduce domestic hot water energy demand
60. Predictive model of convective heat transfer coefficient in bone micro-grinding using nanofluid aerosol cooling10.1016/j.icheatmasstransfer.2021.105317 ↗
61. Experimental assessment of an environmentally friendly grinding process using nanofluid minimum quantity lubrication with cryogenic air10.1016/j.jclepro.2018.05.009 ↗
62. Theoretical study of MHD electro-osmotically flow of third-grade fluid in micro channel
63. Combined impact of Cattaneo-Christov double diffusion and radiative heat flux on bio-convective flow of Maxwell liquid configured by a stretched nano-material surface
64. Artificial neural networking (ANN) analysis for heat and entropy generation in flow of non-Newtonian fluid between two rotating disks
65. Effect of two isothermal obstacles on the natural convection of nanofluid in the presence of magnetic field inside an enclosure with sinusoidal wall temperature distribution10.1016/j.ijheatmasstransfer.2018.01.019 ↗
66. Numerical simulation of the magnetic field and Joule heating effects on force convection flow through parallel-plate microchannel in the presence of viscous dissipation effect
67. Nano-enhanced biolubricant in sustainable manufacturing: from processability to mechanisms10.1007/s40544-021-0536-y ↗
68. Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil10.1016/j.cja.2015.10.012 ↗
69. Enhancement in thermal energy and solute particles using hybrid nanoparticles by engaging activation energy and chemical reaction over a parabolic surface via finite element approach10.3390/fractalfract5030119 ↗
70. An updated review on application of nanofluids in heat exchangers for saving energy10.1016/j.enconman.2019.111886 ↗
71. A machine learning approach to the prediction of transport and thermodynamic processes in multiphysics systems - heat transfer in a hybrid nanofluid flow in porous media10.1016/j.jtice.2021.03.043 ↗
72. Effects of nanofluid and radiative heat transfer on the double-diffusive forced convection in microreactors10.1007/s10973-018-7027-z ↗
73. Generation of entropy in micro thermofluidic and thermochemical energy systems-A critical review10.1016/j.ijheatmasstransfer.2020.120471 ↗
74. A techno-economic investigation of 2D and 3D configurations of fins and their effects on heat sink efficiency of MHD hybrid nanofluid with slip and non-slip flow10.1016/j.ijmecsci.2020.105975 ↗
75. Entropy generation of boehmite alumina nanofluid flow through a minichannel heat exchanger considering nanoparticle shape effect10.1016/j.physa.2019.01.106 ↗
76. Loading PCM into buildings envelope to decrease heat gain-performing transient thermal analysis on nanofluid filled solar system10.3389/fenrg.2021.727011 ↗
77. Hybrid CHP/geothermal borehole system for multi-family building in heating dominated climates10.3390/su12187772 ↗
78. Numerical investigation of heat transfer in a power-law non-Newtonian fluid in a C-Shaped cavity with magnetic field effect using finite difference lattice Boltzmann method10.1016/j.compfluid.2018.09.012 ↗
79. Nanofluids: physical phenomena, applications in thermal systems and the environment effects- a critical review10.1016/j.jclepro.2021.128573 ↗
80. Rheological characteristics of non-Newtonian nanofluids: experimental investigation10.1016/j.icheatmasstransfer.2010.11.019 ↗
81. Thermal conductivity of non-Newtonian nanofluids: experimental data and modeling using neural network10.1016/j.ijheatmasstransfer.2010.11.039 ↗
82. Landen inequalities for Gaussian9hypergeometric function, Rev. R. Acad. Cienc. Exactas F\'{\i}s
83. On approximating the quasi-arithmetic mean
84. Quadratic transformation inequalities for Gaussian hypergeometric function
85. Sharp bounds for the Neuman mean in terms of the quadratic and second Seiffert means
86. A note on the Neuman-S\'{a}ndor mean10.7153/jmi-08-20 ↗
87. Optimal bounds for Neuman-S\'{a}ndor mean in terms of the convex combinations of harmonic, geometric, quadratic, and contraharmonic means10.1155/2012/302635 ↗
88. Almost sectorial operators on $\Psi$-Hilfer derivative fractional impulsive integro-differential equations
89. Numerical solution of traveling waves in chemical kinetics: time-fractional Fishers equations10.1142/S0218348X22400515 ↗
90. Inequalities for generalized trigonometric and hyperbolic functions with one parameter10.7153/jmi-2020-14-01 ↗
91. Study on date–Jimbo–Kashiwara–Miwa equation with conformable derivative dependent on time parameter to find the exact dynamic wave solutions
92. Finite element methods
93. Donea · 2003
94. Monk · 2003
95. Design a J-type air-based battery thermal management system through surrogate-based optimization10.1016/j.apenergy.2019.113426 ↗
96. Experimental study of melting and solidification of PCM in a triplex tube heat exchanger with fins10.1016/j.enbuild.2013.09.007 ↗