journal article·2022-07

Cost-effective Prussian blue analogue composite proton exchange membranes for low humidity fuel cell operation

Yan Yin, Mengyuan Li, Xin Liu, Na Xie, Chenyang Zheng, Guokun Liu, Shuoyao Yin, Xintian Li, Yabiao Pei, Junfeng Zhang, Yanzhou Qin, Michael D. Guiver

Publisher page

Abstract

Proton exchange membranes (PEMs) exhibit reduced proton conductivity caused by severe dehydration under low relative humidity (RH), which is a pivotal bottleneck toward widespread commercialization of PEM fuel cells (PEMFCs). Previous PEM optimizing strategies have predominantly pursued increasing water uptake or enlarging hydrophilic domains, for which there is less focus on the mode of proton transport (Grotthuss or vehicular mechanisms) as the underlying reason. Here, a counterintuitive route is proposed by incorporating Cu II[Fe III(CN) 6] 2/3 Prussian blue analogue (CuFe-PBA) additive, which possesses a hydrophobic framework. However, due to the ideal lattice length of CuFe-PBA, the lattice water molecules contained within this framework form well-connected hydrogen bond networks, which promote Grotthuss-type proton transport that is less dependent on RH conditions. Consequently, CuFe-PBA doped in sulfonated polysulfone (SPSf) matrix yields SPSf/CuFe-PBA composite PEMs showing better performance over unfilled PEM in both ex situ and in situ evaluations, especially under low RH conditions, which are competitive with Nafion 212. Preliminary trials of scale-up for CuFe-PBA and composite PEMs with cost estimation, and feasibility of incorporating polytetrafluoroethylene reinforcement, suggest economic and practical potential. Thus, CuFe-PBA composite PEMs may be of particular interest to PEMFC and related materials communities.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Membrane-based Ion Separation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. High temperature proton exchange membrane fuel cells: progress in advanced materials and key technologies10.1039/D0CS00296H ↗
2. A review of proton exchange membrane fuel cell water management: membrane electrode assembly10.1016/j.jpowsour.2021.230723 ↗
3. Nanocrack-regulated self-humidifying membranes10.1038/nature17634 ↗
4. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
5. Hydrocarbon-based polymer electrolyte membranes: importance of morphology on ion transport and membrane stability10.1021/acs.chemrev.6b00586 ↗
6. Ti2Zr2O8 nanotube as an additive in the fuel cell membrane and catalyst layer for improved low humidity operation10.1016/j.jpowsour.2021.230386 ↗
7. Fabrication of water-insoluble phosphotungstic acid-carbon nitride nanohybrids for promoting proton transport of nanocomposite proton exchange membranes10.1016/j.jpowsour.2021.230195 ↗
8. Enhancement of fuel cell performance with less-water dependent composite membranes having polyoxometalate anchored nanofibrous interlayer10.1016/j.jpowsour.2016.07.027 ↗
9. Protons and hydroxide ions in aqueous systems10.1021/acs.chemrev.5b00736 ↗
10. Proton conductivity: materials and applications10.1021/cm950192a ↗
11. The Grotthuss mechanism10.1016/0009-2614(95)00905-J ↗
12. Proton transport in metal-organic frameworks10.1021/acs.chemrev.9b00842 ↗
13. Fabrication and characterization of self-assembled Nafion–SiO2–ePTFE composite membrane of PEM fuel cell10.1016/j.memsci.2007.12.025 ↗
14. Synthesis and characterization of Nafion®-MO2 (M=Zr, Si, Ti) nanocomposite membranes for higher temperature PEM fuel cells10.1016/j.electacta.2005.05.016 ↗
15. Nafion-based composite electrolytes for proton exchange membrane fuel cells operating above 120 °C with titania nanoparticles and nanotubes as fillers10.1016/j.jpowsour.2010.08.025 ↗
16. Fabrication and evaluation of Nafion nanocomposite membrane based on ZrO2–TiO2 binary nanoparticles as fuel cell MEA10.1016/j.ijhydene.2012.09.096 ↗
17. Facile synthesis of porous metal oxide nanotubes and modified Nafion composite membranes for polymer electrolyte fuel cells operated under low relative humidity10.1021/am503789d ↗
18. New nanocomposite proton conducting membranes based on a core–shell nanofiller for low relative humidity fuel cells10.1039/c3ra40305j ↗
19. Preparation and characterization of a modified montmorillonite/sulfonated polyphenylether sulfone/PTFE composite membrane10.1016/j.ijhydene.2010.11.022 ↗
20. Proton conductivity improvement of sulfonated poly (ether ether ketone) nanocomposite membranes with sulfonated halloysite nanotubes prepared via dopamine-initiated atom transfer radical polymerization10.1016/j.memsci.2016.01.023 ↗
21. Synthesis and characterization of sulfonated polytriazole-clay proton exchange membrane by in situ polymerization and click reaction for direct methanol fuel cells10.1016/j.jpowsour.2012.02.007 ↗
22. Mineral nanofibre reinforced composite polymer electrolyte membranes with enhanced water retention capability in PEM fuel cells10.1016/j.memsci.2011.04.027 ↗
23. Composite polymer electrolyte membranes based on Mg–Al layered double hydroxide (LDH) platelets for H2/air-fed fuel cells10.1016/j.ssi.2015.03.037 ↗
24. Highly-performing and low-cost nanostructured membranes based on polysulfone and layered doubled hydroxide for high-temperature proton exchange membrane fuel cells10.1016/j.jpowsour.2020.228440 ↗
25. Enhancement of PEM fuel cell performance at higher temperatures and lower humidities by high performance membrane electrode assembly based on Nafion/zeolite membrane10.1016/j.ijhydene.2015.02.078 ↗
26. Carbon dots with multi-functional groups and the application in proton exchange membranes10.1016/j.electacta.2017.11.047 ↗
27. Sulphonated imidized graphene oxide (SIGO) based polymer electrolyte membrane for improved water retention, stability and proton conductivity10.1016/j.jpowsour.2015.08.093 ↗
28. Cellulose nanofiber-embedded sulfonated poly(ether sulfone) membranes for proton exchange membrane fuel cells10.1016/j.carbpol.2017.12.074 ↗
29. Efficient and durable composite membranes based on polydopamine-mediated sulfonated graphene oxide for direct methanol fuel cells10.1039/D1TA07882H ↗
30. Enhancing water retention and low-humidity proton conductivity of sulfonated poly(ether ether ketone) composite membrane enabled by the polymer-microcapsules with controllable hydrophilicity–hydrophobicity10.1016/j.jpowsour.2013.10.017 ↗
31. Independent control of water retention and acid–base pairing through double-shelled microcapsules to confer membranes with enhanced proton conduction under low humidity10.1039/C2TA00186A ↗
32. Enhanced water retention and stable dynamic water behavior of sulfonated poly(ether ether ketone) membranes under low humidity by incorporating humidity responsive double-shelled hollow spheres10.1039/c3ta11620d ↗
33. Towards high water retention of proton exchange membranes at elevated temperature via hollow nanospheres10.1016/j.memsci.2010.05.012 ↗
34. Rigid-flexible hybrid proton-exchange membranes with improved water-retention properties and high stability for fuel cells10.1002/ente.201402011 ↗
35. Novel polyamide proton exchange membranes with bi-functional sulfonimide bridges for fuel cell applications10.1016/j.electacta.2014.11.047 ↗
36. The roles of solvent type and amount of residual solvent on determining the structure and performance of sulfonated poly(ether ether ketone) proton exchange membranes10.1016/j.memsci.2016.10.007 ↗
37. Effect of residual casting solvent content on the structure and properties of sulfonated poly(ether ether ketone) membranes10.1016/j.memsci.2015.05.038 ↗
38. Effect of water on the low temperature conductivity of polymer electrolytes10.1021/jp0531208 ↗
39. Proton exchange membranes by radiation grafting of styrene onto FEP films. IV. Evaluation of the states of water10.1002/app.1995.070570709 ↗
40. Oriented proton-conductive nano-sponge-facilitated polymer electrolyte membranes10.1039/C9EE03301G ↗
41. Magnetic field alignment of stable proton-conducting channels in an electrolyte membrane10.1038/s41467-019-08622-2 ↗
42. A flexible metal–organic framework with a high density of sulfonic acid sites for proton conduction10.1038/s41560-017-0018-7 ↗
43. Weakly humidity-dependent proton-conducting COF membranes10.1002/adma.202005565 ↗
44. MOF water harvesters10.1038/s41565-020-0673-x ↗
45. Pore surface engineering in porous, chemically stable covalent organic frameworks for water adsorption10.1039/C5TA07998E ↗
46. Recent advances in Prussian blue and Prussian blue analogues: synthesis and thermal treatments10.1016/j.ccr.2017.09.014 ↗
47. CoFeP nanocube-arrays based on Prussian blue analogues for accelerated oxygen evolution electrocatalysis10.1016/j.jpowsour.2021.230884 ↗
48. Prussian blue analogue Co3(Co(CN)6)2 cuboids as an electrode material for high-performance supercapacitor10.1016/j.jpowsour.2021.230521 ↗
49. Nitrogen-doped carbon-wrapped porous FeMnO3 nanocages derived from etched Prussian blue analogues as high-performance anode for lithium ion batteries10.1016/j.jpowsour.2020.228683 ↗
50. Synthesis and electrochemical properties of Na-rich Prussian blue analogues containing Mn, Fe, Co, and Fe for Na-ion batteries10.1016/j.jpowsour.2017.12.052 ↗
51. Copper hexacyanoferrate battery electrodes with long cycle life and high power10.1038/ncomms1563 ↗
52. Neutron diffraction study of Prussian Blue, Fe4[Fe(CN)6]3.xH2O. Location of water molecules and long-range magnetic order10.1021/ic50206a032 ↗
53. Hydrous nickel-iron Turnbull's blue as a high-rate and low-temperature proton electrode10.1021/acsami.9b20320 ↗
54. Porous framework of T2[Fe(CN)6]•xH2O with T=Co, Ni, Cu, Zn, and H2 storage10.1016/j.jssc.2008.07.030 ↗
55. Diffusion-free Grotthuss topochemistry for high-rate and long-life proton batteries10.1038/s41560-018-0309-7 ↗
56. Metal-organic framework cathodes based on a vanadium hexacyanoferrate Prussian blue analogue for high-performance aqueous rechargeable batteries10.1002/aenm.201601491 ↗
57. Self-diffusion of water in multicellular spheroids measured by magnetic resonance microimaging
58. Water uptake by and transport through Nafion® 117 membranes10.1149/1.2056194 ↗
59. Spin diffusion measurements: spin echoes in the presence of a time‐dependent field gradient10.1063/1.1695690 ↗
60. Properties of water in prestretched recast Nafion10.1021/ma800194z ↗
61. Sticky"-ends-guided creation of functional hollow nanopores for guest encapsulation and water transport10.1021/acs.accounts.6b00051 ↗
62. Structural determinants of water permeation through aquaporin-110.1038/35036519 ↗
63. Durability enhancement of proton exchange membrane fuel cells by ferrocyanide or ferricyanide additives10.1016/j.memsci.2021.119282 ↗
64. A paradigm shift for a new class of proton exchange membranes with ferrocyanide proton-conducting groups providing enhanced oxidative stability10.1016/j.memsci.2020.118536 ↗
65. EQCM analysis of redox behavior of CuFe Prussian blue analog in Mg battery electrolytes10.1149/2.0751512jes ↗
66. Effect of cation (Li+, Na+, K+, Rb+, Cs+) in aqueous electrolyte on the electrochemical redox of Prussian blue analogue (PBA) cathodes10.1016/j.jechem.2019.01.025 ↗
67. A review of PEM fuel cell durability: degradation mechanisms and mitigation strategies10.1016/j.jpowsour.2008.06.006 ↗
68. Gas crossover and membrane degradation in polymer electrolyte fuel cells10.1016/j.electacta.2006.03.008 ↗
69. Annealing of Nafion 1100 in the presence of an annealing agent: a powerful method for increasing ionomer working temperature in PEMFCs10.1002/fuce.201200126 ↗
70. Thermal behavior of Nafion membranes10.1023/A:1010196226309 ↗
71. Porous PTFE reinforced SPEEK proton exchange membranes for enhanced mechanical, dimensional, and electrochemical stability10.1016/j.polymer.2021.123506 ↗
72. Fabrication and characterization of improved PFSA/ePTFE composite polymer electrolyte membranes10.1016/j.memsci.2007.09.008 ↗