journal article·2022-03

Distribution of relaxation times: A method for measuring air flow distribution in high-temperature proton exchange membrane fuel cell stacks

Kangfu Ruan, Linlin Yang, Hai Sun, Gongquan Sun

Publisher page

Abstract

Measurement of flow distribution in the fuel cell stack is a challenging task. This study proposes a new method to measure air flow distribution in high-temperature proton exchange membrane fuel cell stacks. The characteristic frequency related to channel impedance is extracted using the distribution of relaxation times analysis. A simple correlation between the air stoichiometry and the characteristic frequency is developed. The influence of various factors on the correlation, including cell operation conditions, fluid physical properties and channel dimensions, are investigated. The experimental results show a good agreement with the correlation. Error estimation indicates that the temperature distribution of the stack, gas humidity and pressure distribution in the inlet manifold have no significant effect on the proposed method under normal conditions. The accuracy and practicability are verified using a three-cell stack with separate mass flow controller (MFC) systems. The results show less than 3.11% of relative error between the reference air stoichiometry given by the MFC and those measured from our proposed method for air stoichiometry below 3.0 at 0.1 A cm −1. The present method provides powerful support for designing high consistency stacks and the real-time monitoring cells state-of-health in stacks.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Haider · 2020
2. ACID-DOPED polybenzimidazoles - a new polymer electrolyte10.1149/1.2044337 ↗
3. Polybenzimidazole-based high-temperature polymer electrolyte membrane fuel cells: new insights and recent progress10.1007/s41918-020-00080-5 ↗
4. Li · 2016
5. On flow maldistribution in PEMFC stacks10.1080/15435075.2011.576288 ↗
6. Investigation and equalisation of the flow distribution in a fuel cell stack10.1016/j.jpowsour.2019.227546 ↗
7. Pressure drop and flow distribution in parallel-channel configurations of fuel cells: U-type arrangement10.1016/j.ijhydene.2008.08.020 ↗
8. Pressure and flow distribution in internal gas manifolds of a fuel-cell stack10.1016/S0378-7753(02)00615-8 ↗
9. Performance analysis and optimization of PEM fuel cell stacks using flow network approach10.1016/j.jpowsour.2005.01.023 ↗
10. Investigation of performance heterogeneity of PEMFC stack based on 1+1D and flow distribution models10.1016/j.enconman.2020.112502 ↗
11. Why a more uniform fuel/oxygen distribution is critical for fuel cell stack performance improvement10.1002/er.4214 ↗
12. Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions10.1016/j.pecs.2020.100859 ↗
13. The reactant starvation of the proton exchange membrane fuel cells for vehicular applications: a review10.1016/j.enconman.2018.12.049 ↗
14. Analysis and improvement of flow distribution in manifold for proton exchange membrane fuel cell stacks10.1016/j.energy.2021.120427 ↗
15. In-situ monitoring of internal temperature, flow rate and pressure in the high-temperature proton exchange membrane fuel cell stack using flexible integrated micro sensor10.1016/S1452-3981(23)11227-2 ↗
16. Hydrogen economy of the fuel cell hybrid power system optimized by air flow control to mitigate the effect of the uncertainty about available renewable power and load dynamics10.1016/j.enconman.2018.10.058 ↗
17. Performance evaluation of commercial-size proton exchange membrane fuel cell stacks considering air flow distribution in the manifold10.1016/j.enconman.2019.112256 ↗
18. Experimental characterization of a fast heating system for microfluidic direct methanol fuel cells
19. Laser-optical methods for transport studies in low temperature fuel cells
20. Recent progress in the use of electrochemical impedance spectroscopy for the measurement, monitoring, diagnosis and optimization of proton exchange membrane fuel cell performance10.1016/j.jpowsour.2020.228361 ↗
21. The influence of impurities in high temperature polymer electrolyte membrane fuel cells performance10.1016/j.ijhydene.2016.06.201 ↗
22. Performance degradation tests of phosphoric acid doped polybenzimidazole membrane based high temperature polymer electrolyte membrane fuel cells10.1115/1.4029081 ↗
23. A quasi 2D model of a high temperature polymer fuel cell for the interpretation of impedance spectra10.1002/fuce.201300147 ↗
24. Understanding the role of the anode on the polarization losses in high-temperature polymer electrolyte membrane fuel cells using the distribution of relaxation times analysis10.1016/j.jpowsour.2020.228469 ↗
25. Porous electrospun carbon nano fibers network as an integrated electrode@gas diffusion layer for high temperature polymer electrolyte membrane fuel cells10.1016/j.electacta.2020.136192 ↗
26. Analysis of the regeneration behavior of high temperature polymer electrolyte membrane fuel cells after hydrogen starvation10.1016/j.jpowsour.2019.227562 ↗
27. Impact of catalyst layer morphology on the operation of high temperature PEM fuel cells10.1016/j.powera.2020.100042 ↗
28. Distribution of relaxation times analysis of high-temperature PEM fuel cell impedance spectra10.1016/j.electacta.2017.02.011 ↗
29. AC impedance characteristics of a 2 kW PEM fuel cell stack under different operating conditions and load changes10.1016/j.ijhydene.2007.06.024 ↗
30. Electrochemical impedance study of PEM fuel cells. Experimental diagnostics and modeling of air cathodes10.1021/jp003273p ↗
31. Characterization of polymer electrolyte fuel cells using AC impedance spectroscopy10.1149/1.1836485 ↗
32. Oscillations in gas channels Part II. Unraveling the characteristics of the low frequency loop in air-fed PEFC impedance spectra10.1149/1.2742291 ↗
33. Oscillations in gas channels Part I. The forgotten player in impedance spectroscopy in PEFCs10.1149/1.2435706 ↗
34. Measurement of spatially resolved impedance spectroscopy with local perturbation10.1002/fuce.201200223 ↗
35. Estimating air flow rates in a fuel cell system using electrochemical impedance
36. Measurements of air velocities in polymer electrolyte membrane fuel cell channels using electrochemical impedance spectroscopy10.1149/2.0481608jes ↗
37. EIS as a tool to determine fuel flow distribution in molten carbonate fuel cells10.1149/1.1624298 ↗
38. Characteristic time constants derived from the low-frequency arc of impedance spectra of fuel cell stacks
39. A model for local impedance of the cathode side of PEM fuel cell with segmented electrodes10.1149/2.066207jes ↗
40. Detection of cells state-of-health in PEM fuel cell stack using EIS measurements coupled with multiphysics modeling10.1002/fuce.201300209 ↗
41. A proton exchange membrane fuel cell impedance model taking into account convection along the air channel: on the bias between the low frequency limit of the impedance and the slope of the polarization curve10.1016/j.electacta.2012.07.065 ↗
42. Analytical impedance of oxygen transport in a PEM fuel cell channel10.1149/2.0951904jes ↗
43. A model for extraction of spatially resolved data from impedance spectrum of a PEM fuel cell10.1149/2.0511805jes ↗
44. Analytical solution for the low frequency polymer electrolyte membrane fuel cell impedance10.1016/j.jpowsour.2018.10.039 ↗
45. A fast low-current model for impedance of a PEM fuel cell cathode at low air stoichiometry10.1149/2.0561709jes ↗
46. Comparison of two physical models for fitting PEM fuel cell impedance spectra measured at a low air flow stoichiometry10.1149/2.0871603jes ↗
47. A model for PEM fuel cell impedance: oxygen flow in the channel triggers spatial and frequency oscillations of the local impedance10.1149/2.0911509jes ↗
48. The impact of flow field plate misalignment on the gas diffusion layer intrusion and performance of a high-temperature polymer electrolyte fuel cell10.1016/j.jpowsour.2021.230036 ↗
49. Advanced impedance study of polymer electrolyte membrane single cells by means of distribution of relaxation times10.1016/j.jpowsour.2018.09.004 ↗
50. Hahn · 2019
51. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
52. Wan · 2021
53. Schönleber · 2021
54. A simple transient model for a high temperature PEM fuel cell impedance10.1016/j.ijhydene.2013.11.058 ↗
55. On a new degradation mode for high-temperature polymer electrolyte fuel cells: how bipolar plate degradation affects cell performance10.1016/j.electacta.2011.01.088 ↗
56. Three-dimensional macrohomogeneous mathematical model of an industrial-scale high-temperature PEM fuel cell stack10.1016/j.electacta.2018.04.042 ↗