journal article·2020-12

Confined growth of primary grains towards stabilizing integrated structure of Ni-rich materials

Fanghui Du, Qun Zhou, Haishang Cao, Hui Dai, Die Hu, Pengpeng Sun, Jason Adkins, Junwei Zheng

Publisher page

Abstract

Abstract Controllable microstructure growth is desirable for materials to achieve optimized performance. Herein, we demonstrate that LiNi0·8Co0·15Al0·05O2, a promising cathode for lithium ion batteries toward high energy density, can be crystallized in a Mn-rich confined environment, leading to the regulation of the size of primary grains. As a result, the material with the Mn-content of 3 wt% exhibits a substantial enhancement in capacity retention of 81% after 900 cycles at 2 C between 2.8 and 4.3 V, relative to the corresponding value of 55% for the pristine counterpart. The exceptional performance is further highlighted by the full cell with the Mn-doped LiNi0·8Co0·15Al0·05O2 cathode and Li4Ti5O12 as the anode, exhibiting capacity retention of 86% after 1000 cycles. This mainly means that the reduction of the size of the primary grains in the integrated structure can alleviate the intrinsic internal strain induced by delithiation/lithiation of the material and consequently diminish the formation of microcracks in the nickel-rich materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Challenges for rechargeable Li batteries †10.1021/cm901452z ↗
2. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
3. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries10.1002/anie.201409262 ↗
4. High-energy density core–shell structured Li[Ni0.95Co0.025Mn0.025]O2 cathode for lithium-ion batteries10.1021/acs.chemmater.7b01425 ↗
5. Extracting maximum capacity from Ni-rich Li[Ni0.95Co0.025Mn0.025]O2 cathodes for high-energy-density lithium-ion batteries10.1039/C7TA11346C ↗
6. There and back again—the journey of LiNiO2 as a cathode active10.1002/anie.201812472 ↗
7. Nickel-rich and lithium-rich layered oxide cathodes: Progress and Perspectives10.1002/aenm.201501010 ↗
8. Nickel-rich layered cathode materials for automotive lithium-ion batteries: Achievements and perspectives10.1021/acsenergylett.6b00594 ↗
9. Surface changes on LiNi0.8Co0.2O2 particles during testing of high-power lithium-ion cells10.1016/S1388-2481(02)00388-0 ↗
10. Correlating structural changes and gas evolution during the thermal decomposition of charged LixNi0.8Co0.15Al0.05O2 cathode materials10.1021/cm303096e ↗
11. Effects of cation mixing on the electrochemical lithium intercalation reaction into porous Li1−δNi1−yCoyO2 electrodes10.1016/0167-2738(96)00269-X ↗
12. Variation of electronic conductivity within secondary particles revealing a capacity-fading mechanism of layered Ni-rich cathode10.1021/acsenergylett.8b02043 ↗
13. Degradation mechanism of Ni-enriched NCA cathode for lithium batteries: are microcracks really critical?10.1021/acsenergylett.9b00733 ↗
14. An unavoidable challenge for Ni-rich positive electrode materials for lithium-ion batteries10.1021/acs.chemmater.9b02372 ↗
15. Structural and electrochemical aspects of LiNi0.8Co0.1Mn0.1O2 cathode materials doped by various cations10.1021/acsenergylett.8b02302 ↗
16. Ti-gradient doping to stabilize layered surface structure for high performance high-Ni oxide cathode of Li-ion battery10.1002/aenm.201901756 ↗
17. A Mg-doped high-nickel layered oxide cathode enabling safer, high-energy-density Li-ion batteries10.1021/acs.chemmater.8b03900 ↗
18. SiO2-coated LiNi0.915Co0.075Al0.01O2 cathode material for rechargeable Li-ion batteries10.1039/C6NR07438C ↗
19. Al2O3, SiO2 and TiO2 as coatings for safer LiNi0.8Co0.15Al0.05O2 cathodes: electrochemical performance and thermal analysis by accelerating rate calorimetry10.1149/2.0071712jes ↗
20. Building ultraconformal protective layers on both secondary and primary particles of layered lithium transition metal oxide cathodes10.1038/s41560-019-0387-1 ↗
21. Role of surface coating on cathode materials for lithium-ion batteries10.1039/c0jm00154f ↗
22. Nanostructured high-energy cathode materials for advanced lithium batteries10.1038/nmat3435 ↗
23. Enhancing interfacial bonding between anisotropically oriented grains using a glue-nanofiller for advanced Li-ion battery cathode10.1002/adma.201506256 ↗
24. Impact of microcrack generation and surface degradation on a nickel-rich layered Li[Ni0.9Co0.05Mn0.05]O2 cathode for lithium-ion batteries10.1021/acs.chemmater.7b03268 ↗
25. Probing electrical degradation of cathode materials for lithium-ion batteries with nanoscale resolution10.1016/j.nanoen.2018.04.005 ↗
26. High-voltage charging-induced strain, Heterogeneity, and micro-cracks in secondary particles of a nickel-rich layered cathode material10.1002/adfm.201900247 ↗
27. Effect of rigidity of porous structure on electrochemical behavior of pristine Li4Ti5O12 microspheres10.1016/j.electacta.2015.01.017 ↗
28. Electrochemistry and structural chemistry of LiNiO2 (r3¯m) for 4 volt secondary lithium cells10.1149/1.2220730 ↗
29. Structural and chemical characterization of layered Li1-xNi1-yMnyO2-δ (y = 0.25 and 0.5, and 0 ≤ (1 − x) ≤ 1) oxides10.1021/cm034757b ↗
30. Cation ordering of Zr-doped LiNiO2 cathode for lithium-ion batteries10.1021/acs.chemmater.8b00619 ↗
31. Significantly improving cycling performance of cathodes in lithium ion batteries: the effect of Al2O3 and LiAlO2 coatings on LiNi0.6Co0.2Mn0.2O210.1016/j.nanoen.2017.11.010 ↗
32. Capacity fading of Ni-rich NCA cathodes: effect of microcracking extent10.1021/acsenergylett.9b02302 ↗
33. Capacity fade mechanisms and side reactions in lithium-ion batteries10.1149/1.1838857 ↗
34. Surface characterization of electrodes from high power lithium-ion batteries10.1149/1.1505636 ↗
35. Capacity fade of LiAlyNi1−x−yCoxO2 cathode for lithium-ion batteries during accelerated calendar and cycle life tests (surface analysis of LiAlyNi1−x−yCoxO2 cathode after cycle tests in restricted depth of discharge ranges)10.1016/j.jpowsour.2014.02.018 ↗
36. Li[Ni0.9Co0.09W0.01]O2: a new type of layered oxide cathode with high cycling stability
37. Quaternary layered Ni-rich NCMA cathode for lithium-ion batteries10.1021/acsenergylett.8b02499 ↗
38. Observation of anisotropic microstructural changes during cycling in LiNi0.5Co0.2Mn0.3O2 cathode material10.1016/j.jpowsour.2014.10.197 ↗
39. Problems and their origins of Ni-rich layered oxide cathode materials10.1016/j.ensm.2019.08.013 ↗