Mass transport characterization of platinum group metal-free polymer electrolyte fuel cell electrodes using a differential cell with an integrated electrochemical sensor
Source abstract
Abstract
Abstract A method to enable in place measurements of the mass transport resistance for platinum group metal (PGM)-free polymer electrolyte fuel cell electrodes is presented. Thin platinum black layers deposited at the membrane interface served as electrochemical sensors, performing hydrogen oxidation, for hydrogen probe gas molecules while PGM-free catalyst materials, being electro-inactive to hydrogen oxidation, were probed for mass transport resistance through the full layer. Theoretical considerations, assumptions, and future applications of the methodology are discussed. The method is demonstrated on catalyst layers fabricated from a commercially available PGM-free oxygen reduction catalyst. Effective diffusivity measurements using hydrogen were made which were then used to estimate the effective diffusivity of air of the full layer without the confounding effect of electrode flooding. This method complements alternative techniques such as mercury porosimetry or x-ray computed tomography and can be easily adopted by research groups everywhere to study MEA-level properties of PGM-free catalyst layers and accelerate the development and deployment of PGM-free PEFCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Papageorgopoulos · 2018
2. Critical advancements in achieving high power and stable nonprecious metal catalyst – based MEAs for real-world proton exchange membrane fuel cell applications10.1126/sciadv.aar7180 ↗
3. Current challenge and perspective of PGM-free cathode catalysts for PEM fuel cells10.1007/s11708-017-0477-3 ↗
4. Nonprecious metal catalysts for oxygen reduction in heterogeneous aqueous systems10.1021/acs.chemrev.7b00335 ↗
5. Advancements in rationally designed PGM-free fuel cell catalysts derived from metal–organic frameworks10.1039/C6MH00344C ↗
6. Durability challenges and perspective in the development of PGM-free electrocatalysts for the oxygen reduction reaction
7. Jaouen · 2018 · 231
8. Litster · 2004 · vol. 130 · 61
9. Direct atomic-level insight into the active sites of a high-performance PGM-free ORR catalyst10.1126/science.aan2255 ↗
10. Structural and mechanistic basis for the high activity of Fe–N–C catalysts toward oxygen reduction10.1039/C6EE01160H ↗
11. Modeling electrochemical performance of the hierarchical morphology of precious group metal-free cathode for polymer electrolyte fuel cell10.1149/2.0041712jes ↗
12. Resolving challenges of mass transport in non Pt-group metal catalysts for oxygen reduction in proton exchange membrane fuel cells10.1149/2.0141809jes ↗
13. Resolving the three-dimensional microstructure of polymer electrolyte fuel cell electrodes using nanometer-scale X-ray computed tomography10.1002/adfm.201101525 ↗
14. Imaging ionomer in fuel cell catalyst layers with synchrotron nano transmission x-ray microscopy10.1016/j.ssi.2019.02.017 ↗
15. The use of limiting current to determine transport resistance in PEM fuel cells10.1149/1.2356218 ↗
16. Experimental method to determine the mass transport resistance of a polymer electrolyte fuel cell10.1149/1.2218760 ↗
17. Analysis of reactant gas transport in a catalyst layer tetsuya MASHIO, atsushi OHMA, shinji YAMAMOTO, and kazuhiko SHINOHARA nissan research center, nissan motor Co., ltd., yokosuka, kanagawa 237-8523, Japan an analytical10.1149/1.2780966 ↗
18. Measurement of oxygen transport resistance in PEM fuel cells by limiting current methods10.1149/1.3152226 ↗
19. Analysis of oxygen-transport diffusion resistance in proton-exchange-membrane fuel cells10.1149/1.3546038 ↗
20. The impact of platinum loading on oxygen transport resistance10.1149/2.061212jes ↗
21. Investigating fuel-cell transport limitations using hydrogen limiting current10.1016/j.ijhydene.2017.01.036 ↗
22. Polarization loss correction derived from hydrogen local-resistance measurement in low Pt-loaded polymer-electrolyte fuel cells10.1016/j.elecom.2017.04.008 ↗
23. Comparison of Wicke-Kallenbach and Graham's diffusion cells for obtaining transport characteristics of porous solids10.1016/j.ces.2007.10.032 ↗
24. Absolute permeability and Knudsen diffusivity measurements in PEMFC gas diffusion layers and micro porous layers10.1016/j.jpowsour.2012.01.099 ↗
25. Experimental study of mass transport in PEMFCs: through plane permeability and molecular diffusivity in GDLs10.1016/j.electacta.2015.03.100 ↗
26. Alternative analytical analysis for improved Loschmidt diffusion cell10.1016/j.ijheatmasstransfer.2013.06.062 ↗
27. Measurement of effective oxygen diffusivity in electrodes for proton exchange membrane fuel cells10.1016/j.jpowsour.2009.08.065 ↗
28. Effective-diffusivity measurement of partially-saturated fuel-cell gas-diffusion layers10.1149/2.024211jes ↗
29. The impact of platinum loading on oxygen transport resistance10.1149/2.061212jes ↗
30. Newman · 2004
31. Low platinum loading electrodes for polymer electrolyte fuel cells fabricated using thermoplastic ionomers10.1016/0013-4686(94)00272-3 ↗
32. The renaissance of the solid polymer fuel cell10.1016/0378-7753(90)80023-7 ↗
33. Low cost electrodes for proton exchange membrane fuel cells - performance in single cells and Ballard stacks10.1149/1.1838101 ↗
34. Proton exchange membrane fuel cells10.1595/003214097X413102113 ↗
35. Supportless Pt and PtPd nanotubes as electrocatalysts for oxygen-reduction reactions10.1002/anie.200700894 ↗
36. Effective diffusivity in partially-saturated carbon-fiber gas diffusion layers: effect of through-plane saturation distribution10.1016/j.ijheatmasstransfer.2015.02.073 ↗
37. Oxygen transport resistance correlated to liquid water saturation in the gas diffusion layer of PEM fuel cells10.1016/j.ijheatmasstransfer.2013.12.059 ↗
38. Quantification of liquid water saturation in a PEM fuel cell diffusion medium using X-ray microtomography10.1149/1.2203307 ↗
39. Effects of MEA fabrication and ionomer composition on fuel cell performance of PGM-free ORR catalyst
40. Is iron involved in the lack of stability of Fe/N/C electrocatalysts used to reduce oxygen at the cathode of PEM fuel cells?10.1016/j.nanoen.2016.02.038 ↗
41. Poling · 2001 · vol. 1
42. Kocha · 2010
43. New insights into perfluorinated sulfonic-acid ionomers10.1021/acs.chemrev.6b00159 ↗
44. Modeling of low-temperature fuel cell electrodes using non-precious metal catalysts10.1149/2.0311510jes ↗
45. Highly stable precious metal-free cathode catalyst for fuel cell application10.1016/j.jpowsour.2016.07.087 ↗
46. Cunningham · 1980
47. Ichikawa · 2012
48. Hierarchical model for oxygen transport in agglomerates in the cathode catalyst layer of a polymer-electrolyte fuel cell
49. On the micro-, meso-, and macroporous structures of polymer electrolyte membrane fuel cell catalyst layers10.1021/am900600y ↗
50. Mench · 2008
51. Impact of substrate and processing on confinement of nafion thin films10.1002/adfm.201304311 ↗
52. Chapman · 1995
53. Resolving electrode morphology's impact on platinum group metal-free cathode performance using nano-CT of 3D hierarchical pore and ionomer distribution10.1021/acsami.6b08844 ↗
54. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells10.1021/acs.jpclett.6b00216 ↗
55. Direct observations of liquid water formation at nano- and micro-scale in platinum group metal-free electrodes by operando X-ray computed tomography10.1016/j.mtener.2018.05.011 ↗
56. Understanding the role of interfaces for water management in platinum group metal-free electrodes in polymer electrolyte fuel cells10.1021/acsaem.9b00292 ↗
57. Nano-structured platinum group metal-free catalysts and their integration in fuel cell electrode architectures10.1016/j.apcatb.2017.08.067 ↗