Model-based sensor data fusion of quasi-redundant voltage and current measurements in a lithium-ion battery module
Source abstract
Abstract
Abstract In recent years, battery monitoring systems on cell level have been introduced. These architectures frequently employ current and voltage sensors at each battery cell. In this work, a novel model-based sensor data fusion method is presented, which combines the cell's individual current and voltage measurements of a battery module in order to reduce the measurement uncertainty of each value. Especially with distinct battery cell parameters, which typically arise with ongoing aging, the algorithm is superior to common approaches like averaging or total current sensing as it can handle uneven current and voltage distribution. A framework is proposed consisting of a weighted least squares regression algorithm in combination with dual Kalman filters for estimating the battery cells' states and parameters simultaneously. The method is validated with experiments and complementary simulations, in which a battery module, consisting of 12 cells, is cycled with specific current profiles. Reference model parameters are determined by supplementary characterization tests. It is shown that the sensor noise is reduced significantly with the presented algorithm, while no systematic error is induced.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Fault Detection and Control Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. The relative importance of price and driving range on electric vehicle adoption: los angeles case study10.1007/s11116-015-9641-y ↗
2. German roadmap for battery technologies for ess: R&d trends and market development
3. Battery management network for fully electrical vehicles featuring smart systems at cell and pack level
4. V. Lorentz, M. M. Wenger, J. L. Grosch, M. Giegerich, M. Jank, M. Marz, L. Frey, Novel cost-efficient contactless distributed monitoring concept for smart battery cells, in: 2012 IEEE International Symposium, pp. 1342–1347. doi:10.1109/ISIE.2012.6237285.10.1109/ISIE.2012.6237285 ↗
5. Smart battery cell monitoring with contactless data transmission
6. Integrierte zell-sensorik in lithium-ionen-akkus für elektro- und hybridfahrzeuge
7. Origins and accommodation of cell variations in li-ion battery pack modeling10.1002/er.1668 ↗
8. Production caused variation in capacity aging trend and correlation to initial cell performance10.1016/j.jpowsour.2013.08.108 ↗
9. Lithium-ion cell-to-cell variation during battery electric vehicle operation10.1016/j.jpowsour.2015.08.001 ↗
10. Ageing of lithium-ion battery modules with dissipative balancing compared with single-cell ageing10.1016/j.est.2016.03.004 ↗
11. Current distribution within parallel-connected battery cells10.1016/j.jpowsour.2016.10.010 ↗
12. An introduction to multisensor data fusion10.1109/5.554205 ↗
13. Elmenreich · 2002
14. A review of data fusion techniques10.1155/2013/704504 ↗
15. Toward a fully decentralized architecture for multi-sensor data fusion
16. Mitchell · 2012
17. A confidence-based approach to the self-validation, fusion and reconstruction of quasi-redundant sensor data10.1109/19.982977 ↗
18. Rational approaches for combining redundant, independent measurements to minimize combined experimental uncertainty10.1016/j.expthermflusci.2010.01.001 ↗
19. A comparative study of equivalent circuit models for li-ion batteries10.1016/j.jpowsour.2011.10.013 ↗
20. Modelling and experimental evaluation of parallel connected lithium ion cells for an electric vehicle battery system10.1016/j.jpowsour.2016.01.001 ↗
21. An online method to simultaneously identify the parameters and estimate states for lithium ion batteries10.1016/j.electacta.2018.08.076 ↗
22. Model-based dynamic multi-parameter method for peak power estimation of lithium–ion batteries10.1016/j.apenergy.2012.02.061 ↗
23. Thermal modeling of a lifepo4/graphite battery and research on the influence of battery temperature rise on ev driving range estimation
24. Cell-balancing currents in parallel strings of a battery system10.1016/j.jpowsour.2016.04.125 ↗
25. Current distribution of parallel-connected cells in dependence of cell resistance, capacity and number of parallel cells10.1016/j.jpowsour.2018.10.061 ↗
26. Analytical model of the current distribution of parallel-connected battery cells and strings10.1016/j.est.2019.02.031 ↗
27. Dynamics of current distribution within battery cells connected in parallel10.1016/j.est.2018.08.013 ↗
28. Effects of imbalanced currents on large-format lifepo 4/graphite batteries systems connected in parallel10.1016/j.jpowsour.2016.02.087 ↗
29. Strutz · 2016
30. Online cell soc estimation of li-ion battery packs using a dual time-scale kalman filtering for ev applications10.1016/j.apenergy.2012.02.044 ↗
31. Extended kalman filtering for battery management systems of lipb-based hev battery packs: Part 3. state and parameter estimation10.1016/j.jpowsour.2004.02.033 ↗
32. Sigma-point kalman filtering for battery management systems of lipb-based hev battery packs: Part 2: simultaneous state and parameter estimation10.1016/j.jpowsour.2006.06.004 ↗
33. Revisiting the dual extended kalman filter for battery state-of-charge and state-of-health estimation: a use-case life cycle analysis10.1016/j.est.2018.07.006 ↗
34. A new approach to linear filtering and prediction problems10.1115/1.3662552 ↗
35. Seltman
36. The unscented kalman filter for nonlinear estimation
37. Unscented filtering and nonlinear estimation10.1109/JPROC.2003.823141 ↗
38. Analysis of ageing inhomogeneities in lithium-ion battery systems10.1016/j.jpowsour.2013.01.068 ↗
39. Experimental investigation of parametric cell-to-cell variation and correlation based on 1100 commercial lithium-ion cells10.1016/j.est.2017.09.010 ↗