journal article·2019-11

Mechanical contact in composite electrodes of lithium-ion batteries

Bo Lu, Yanfei Zhao, Jiemin Feng, Yicheng Song, Junqian Zhang

Publisher page

Abstract

Abstract An analytical model of mechanical contact problems in composite electrodes of lithium-ion batteries is developed in this article. Two typical types of mechanical contact, namely contact between particles and contact between particle and current collector, are investigated. Key parameters that affect the contact problem are identified from the analytical solution. High uniformity of the particle size is found to be critical to the electrode. Furthermore, a soft current collector could significantly reduce the contact stress and hence is also suggested. It is figured out that contact stress is comparable to or even higher than the diffusion-induced stress under free-expansion state, even if the mechanical constraint in electrodes is weak. To highlight the significance of contact stress, an electrochemical cycling verification experiment which involves a charging pause is conducted. Both analytical and experimental results indicate that the mechanical contact plays a crucial role in the evaluation of mechanical stability of lithium-ion battery electrodes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Numerical simulation of intercalation-induced stress in Li-ion battery electrode particles10.1149/1.2759840 ↗
2. Role of material properties and mechanical constraint on stress-assisted diffusion in plate electrodes of lithium ion batteries10.1088/0022-3727/46/10/105307 ↗
3. Investigating electrical contact resistance losses in lithium-ion battery assemblies for hybrid and electric vehicles10.1016/j.jpowsour.2011.03.056 ↗
4. A battery model that enables consideration of realistic anisotropic environment surrounding an active material particle and its application10.1016/j.jpowsour.2017.05.003 ↗
5. Voltage hysteresis of lithium ion batteries caused by mechanical stress10.1039/C5CP06179B ↗
6. The effect of stress on battery-electrode capacity10.1149/2.0371704jes ↗
7. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
8. Battery cycle life prediction with coupled chemical degradation and fatigue mechanics10.1149/2.049210jes ↗
9. Electrode side reactions, capacity loss and mechanical degradation in lithium-ion batteries10.1149/2.0291510jes ↗
10. Reduced order modeling of mechanical degradation induced performance decay in lithium-ion battery porous electrodes10.1149/2.0241509jes ↗
11. Electrochemomechanical degradation of high-capacity battery electrode materials10.1016/j.pmatsci.2017.04.014 ↗
12. Why do batteries fail?10.1126/science.1253292 ↗
13. Evolution of stress within a spherical insertion electrode particle under potentiostatic and galvanostatic operation10.1016/j.jpowsour.2009.01.021 ↗
14. Diffusion-induced stress in layered Li-ion battery electrode plates10.1016/j.jpowsour.2012.02.104 ↗
15. Diffusion-induced stresses in cylindrical lithium-ion batteries: analytical solutions and design insights10.1149/2.079212jes ↗
16. Reducing diffusion-induced stresses of electrode–collector bilayer in lithium-ion battery by pre-strain10.1016/j.jpowsour.2013.05.098 ↗
17. Unveiling the roles of binder in the mechanical integrity of electrodes for lithium-ion batteries10.1149/2.088309jes ↗
18. Fabrication and all solid-state battery performance of TiS2/Li10GeP2S12 composite electrodes10.2320/matertrans.Y-M2016804 ↗
19. Analytical modeling and simulation of porous electrodes: Li-ion distribution and diffusion-induced stress10.1007/s10409-017-0704-5 ↗
20. Kinetics and fracture resistance of lithiated silicon nanostructure pairs controlled by their mechanical interaction10.1038/ncomms8533 ↗
21. Surface coating constraint induced self-discharging of silicon nanoparticles as anodes for lithium ion batteries10.1021/acs.nanolett.5b03047 ↗
22. Stress generation and fracture in lithium insertion materials10.1007/s10008-006-0095-1 ↗
23. Modeling, validation and analysis of mechanical stress generation and dimension changes of a pouch type high power Li-ion battery10.1016/j.jpowsour.2012.09.096 ↗
24. Role of plastic deformation of binder on stress evolution during charging and discharging in lithium-ion battery negative electrodes10.1149/2.046308jes ↗
25. Inelastic shape changes of silicon particles and stress evolution at binder/particle interface in a composite electrode during lithiation/delithiation cycling10.1016/j.eml.2016.03.020 ↗
26. Internal microstructural changes and stress evolution in silicon nanoparticle based composite electrodes10.1149/2.0951714jes ↗
27. A framework for three-dimensional mesoscale modeling of anisotropic swelling and mechanical deformation in lithium-ion electrodes10.1149/2.0081411jes ↗
28. Fragmentation of copper current collectors in Li-ion batteries during spherical indentation10.1016/j.jpowsour.2017.08.068 ↗
29. Internal-short-mitigating current collector for lithium-ion battery10.1016/j.jpowsour.2017.03.004 ↗
30. Simulation of the effect of contact area loss in all-solid-state Li-ion batteries10.1149/2.0481711jes ↗
31. In-situ characterization of strain in lithium battery working electrodes10.1016/j.jpowsour.2014.08.035 ↗
32. A dilatometric study of lithium intercalation into powder-type graphite electrodes10.1149/1.2940573 ↗
33. Multi-scale investigation of thickness changes in a commercial pouch type lithium-ion battery10.1016/j.est.2016.01.006 ↗
34. Partial lithiation strategies for suppressing degradation of silicon composite electrodes10.1016/j.electacta.2018.11.009 ↗
35. Role of polymeric binders on mechanical behavior and cracking resistance of silicon composite electrodes during electrochemical cycling10.1016/j.jpowsour.2018.03.048 ↗
36. Hertz · 1896
37. Surface energy and the contact of elastic solids
38. Multi-scale computation methods: their applications in lithium-ion battery research and development10.1088/1674-1056/25/1/018212 ↗
39. Selection of charge methods for lithium ion batteries by considering diffusion-induced stress and charge time10.1016/j.jpowsour.2016.04.079 ↗
40. Crank · 1979
41. Understanding thickness and porosity effects on the electrochemical performance of LiNi0.6Co0.2Mn0.2O2-based cathodes for high energy Li-ion batteries10.1016/j.jpowsour.2019.02.060 ↗
42. How silicon electrodes can be calendered without altering their mechanical strength and cycle life10.1016/j.jpowsour.2017.10.042 ↗
43. Optimal charging method for lithium ion batteries using a universal voltage protocol accommodating aging10.1016/j.jpowsour.2014.10.185 ↗
44. Modeling of progressive delamination in a thin film driven by diffusion-induced stresses10.1016/j.ijsolstr.2013.04.003 ↗
45. Analytical model on lithiation-induced interfacial debonding of an active layer from a rigid substrate10.1115/1.4034783 ↗
46. Mechanical properties of copper thin films used in electronic devices10.1016/j.proeng.2011.04.250 ↗
47. Life-prediction methods for lithium-ion batteries derived from a fatigue approach I. Introduction: capacity-loss prediction based on damage accumulation10.1149/1.3374634 ↗
48. Life prediction methods for lithium-ion batteries derived from a fatigue approach II. Capacity-loss prediction of batteries subjected to complex current profiles10.1149/1.3432560 ↗
49. Electrochemomechanical fatigue: decoupling mechanisms of fracture-induced performance degradation in LiXMn2O410.1149/2.0191811jes ↗
50. Constant dripping wears away a stone: fatigue damage causing particles' cracking10.1016/j.jpowsour.2019.01.084 ↗