The strategy of entire recovery: From spent cathode material with high nickel content to new LiNi0.5Co0.2Mn0.3O2 and Li2CO3 powders
Source abstract
Abstract
Abstract As the cathode ternary activated materials with high content of nickel have been widely used in lithium-ion batteries, the recycling of the spent cathode materials has been paid worthy attention. In this work, the sulfate solution with Li, Ni, Co and Mn elements was formed by dissolving the spent LiNi0.5Co0.2Mn0.3O2 cathode materials in 20% sulfuric acid and 30% H2O2, assisted with reflux at 90 °C for 1 h. Based on the above solution, the precursor (Ni0.5Co0.2Mn0.3(OH)2), along with the lithium and sodium sulfates mixture solutions were prepared by co-precipitation at 55 °C. Then Li2CO3 powders and sodium sulfate solution were obtained through evaporating filtered solution separated from the preparation of the precursor and added an amount of Na2CO3, with the removal of 30% water and separation at about 70 °C. The purity of recovered Li2CO3 is about 99.5%. The residual concentrations of Ni, Co and Mn in the filtered solution separated from the preparation of precursor are only 0.041, 0.025, 0.038 ppm left, respectively. The prepared cathode material LiNi0.5Co0.2Mn0.3O2 from the precursor exhibits good cycle performance and shows a stable discharge capacity of 140 mAh g−1 at a current rate of 100 mA g−1 between 2.8 and 4.2 V.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Extraction and Separation Processes · Advancements in Battery Materials · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
2. Materials chemistry toward electrochemical energy storage10.1039/C6TA01527A ↗
3. Building better batteries10.1038/451652a ↗
4. Leaching lithium from the anode electrode materials of spent lithium-ion batteries by hydrochloric acid (HCl)10.1016/j.wasman.2015.11.036 ↗
5. Recovery of valuable metals from cathodic active material of spent lithium ion batteries: leaching and kinetic aspects10.1016/j.wasman.2015.05.027 ↗
6. Acid baking of spent lithium ion batteries for selective recovery of major metals: a two-step process10.1016/j.jiec.2016.07.056 ↗
7. Spent lithium-ion battery recycling-reductive ammonia leaching of metals from cathode scrap by sodium sulphite,Waste
8. A stepwise recovery of metals from hybrid cathodes of spent Li-ion batteries with leaching flotation precipitation process10.1016/j.jpowsour.2016.06.072 ↗
9. Hydrometallurgical processing of spent lithium ion batteries (LIBs) in the presence of a reducing agent with emphasis on kinetics of leaching10.1016/j.cej.2015.06.071 ↗
10. Lithium recycling and cathode material regeneration from acid leach liquor of spent lithium-ion battery via facile co-extraction and coprecipitation processes10.1016/j.wasman.2017.03.018 ↗
11. An atom-economic process for the recovery of high value-added metals from spent lithium-ion batteries10.1016/j.jclepro.2015.10.132 ↗
12. Environmental friendly leaching reagent for cobalt and lithium recovery from spent lithium-ion batteries10.1016/j.wasman.2010.08.008 ↗
13. Recovery of cobalt and lithium from spent lithium ion batteries using organic citric acid as leachant10.1016/j.jhazmat.2009.11.026 ↗
14. Ascorbic-acidassisted recovery of cobalt and lithium from spent Li-ion batteries10.1016/j.jpowsour.2012.06.068 ↗
15. Organic oxalate as leachant and precipitant for the recovery of valuable metals from spent lithium-ion batteries10.1016/j.wasman.2012.03.027 ↗
16. Recovery of valuable metal ions from the spent lithium-ion battery using aqueous mixture of mild organic acids as alternative to mineral acids10.1016/j.hydromet.2014.11.006 ↗
17. Use of mild organic acid reagents to recover the Co and Li from spent Li-ion batteries10.1016/j.wasman.2015.12.008 ↗
18. Recovery of metals from spent lithium-ion batteries with organic acids as leaching reagents and environmental assessment10.1016/j.jpowsour.2012.12.089 ↗
19. Dissolution of cathode active material of spent Li-ion batteries using tartaric acid and ascorbic acid mixture to recover Co10.1016/j.hydromet.2016.01.026 ↗
20. Green and facile method for the recovery of spent lithium nickel manganese cobalt oxide (NMC) based lithium ion batteries,Waste
21. A promising approach for the recovery of high value-added metals from spent lithium-ion batteries10.1016/j.jpowsour.2017.03.093 ↗
22. Hierarchical hybrid sandwiched structure of ultrathin graphene nanosheets enwrapped MnO nanooctahedra with excellent lithium storage capability10.1016/j.jallcom.2018.03.316 ↗
23. Hierarchical hybrid ZnFe2O4 nanoparticles/reduced graphene oxide composite with long-term and high-rate performance for lithium ion batteries10.1016/j.jallcom.2017.11.336 ↗
24. Ordered mesoporous carbon supported Ni3V2O8 composites for lithium-ion batteries with longterm and high-rate performance10.1039/C7TA11268H ↗
25. Construction of ultrafine ZnSe nanoparticles on/in amorphous carbon hollow nanospheres with high-power-density sodium storage10.1016/j.nanoen.2019.03.008 ↗
26. NiO nanosheets anchored on honeycomb porous carbon derived from wheat husk for symmetric supercapacitor with high performance10.1016/j.jallcom.2017.11.294 ↗
27. Ethylene glycol-mediated rapid synthesis of carbon-coated ZnFe2O4 nanoflakes with longterm and high-rate performance for lithium-ion batteries10.1039/C7DT04789D ↗
28. Effect of impurities caused by a recycling process on the electrochemical performance of Li[Ni0.33Co0.33Mn0.33]O210.1016/j.jelechem.2014.05.017 ↗