journal article·2019-08

A critical review on the absorptive glass mat (AGM) separators synergistically designed via fiber and structural parameters

Amit Rawal, P.V.Kameswara Rao, Vijay Kumar, Akos Kukovecz

Publisher page

Abstract

Abstract Valve regulated lead acid (VRLA) battery constitutes towards the largest part of the worldwide secondary battery market share. Indisputably, absorptive glass mat (AGM) is a key component in a VRLA battery that is often engineered utilizing the synergy that exists between fiber and structural parameters. Over the past few decades, a considerable progress has been made in designing and tailoring the AGM separators but often limited by ‘trial-and-error’ approach. Here in, we present a comprehensive review that specifically targets the design of AGM separators by bridging a gap between fiber-structure-property relationships. The critical review on various experimental and theoretical studies aims to present a template for ‘designer’ AGM separator to fulfill the demands of any application of VRLA batteries. The review surveys important functions and various properties of AGM separators, which have been related with a key set of fiber and structural parameters. Several challenges presented in the form of failure modes of the VRLA battery can be overcome by leveraging the synergy between key set of fiber and structural parameters. This review also highlights the structural commonalities between AGM separators and the other nonwoven materials. This opens up an opportunity to utilize the existing theoretical models of nonwovens to the AGM separators.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advanced Sensor and Energy Harvesting Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Planté · 1859 · vol. 49 · 402
2. Review of energy storage systems for electric vehicle applications: issues and challenges10.1016/j.rser.2016.11.171 ↗
3. Improving the performance of deep-cycling, valve-regulated, lead/acid batteries10.1016/0378-7753(91)85052-X ↗
4. The key to success: gelled-electrolyte and optimized separators for stationary lead-acid batteries10.1016/j.jpowsour.2006.02.106 ↗
5. Micro-structural design and function of an improved absorptive glass mat (AGM) separator for valve-regulated lead–acid batteries10.1016/S0378-7753(01)01005-9 ↗
6. Advances in recombinant battery separator mat (RBSM) separators for lead-acid batteries—a review10.1016/S0378-7753(01)01004-7 ↗
7. Separator design for valve-regulated lead/acid batteries10.1016/0378-7753(94)01982-2 ↗
8. Essential characteristics for separators in valve-regulated lead–acid batteries10.1016/S0378-7753(02)00315-4 ↗
9. Advantages and disadvantages of valve-regulated
10. Developments in absorptive glass mat separators for cycling applications and 36 V lead- acid batteries10.1016/j.jpowsour.2003.11.083 ↗
11. Saturation influences on the performance of valve-regulated lead–acid batteries10.1016/j.jpowsour.2004.10.013 ↗
12. Amersorb: a new high-performance polymeric separator for lead–acid batteries10.1016/j.jpowsour.2004.10.021 ↗
13. Review of factors that affect the deep cycling performance of valve-regulated lead/acid batteries10.1016/0378-7753(95)02295-3 ↗
14. Improving the valve-regulated lead–acid battery10.1016/S0378-7753(99)00511-X ↗
15. Gas-diffusion approach to the kinetics of oxygen recombination in lead-acid batteries10.1016/S0378-7753(02)00520-7 ↗
16. The behavior of oxygen transport in valve-regulated lead-acid batteries with absorptive glass mat separator10.1149/1.1413990 ↗
17. Absorptive glass-mat separators for valve-regulated lead/acid batteries—thoughts on compression10.1016/S0378-7753(97)02561-5 ↗
18. How compressible is recombinant battery separator mat?10.1016/S0378-7753(99)00011-7 ↗
19. Influence of recharge potential and acid concentration on the discharge behaviour of PbO2 electrodes10.1016/0378-7753(93)90021-R ↗
20. Physical changes in positive active mass during deep discharge-charge cycles of lead-acid cell10.1149/1.2119542 ↗
21. When is capacity loss in lead/acid batteries ‘premature’?10.1016/0378-7753(96)02306-3 ↗
22. Effect of compression on the behaviour of lead-acid batteries10.1016/S0378-7753(00)00639-X ↗
23. Failure modes of valve-regulated lead/acid batteries in different applications10.1016/0378-7753(94)01983-3 ↗
24. Separator materials for valve-regulated lead-acid batteries
25. High-power lead–acid batteries for different applications10.1016/j.jpowsour.2004.11.046 ↗
26. ‘Density/solidity’of recombinant battery separator material—its influence on both separator and battery performance in valve-regulated lead- acid systems10.1016/j.jpowsour.2003.12.024 ↗
27. A multi-layered approach for absorptive glass-mat separators10.1016/S0378-7753(99)00009-9 ↗
28. Battery separators10.1021/cr020738u ↗
29. A review of future directions in automotive battery separators10.1016/j.jpowsour.2003.11.031 ↗
30. Cook · 1984
31. Hutten · 2007
32. Manufacturing of microglass separators
33. AGM separator for 36 V batteries10.1016/S0378-7753(02)00685-7 ↗
34. Valve-regulated lead-acid batteries10.1016/S0378-7753(01)00881-3 ↗
35. Investigation of lead dendrite growth in the formation of valve-regulated lead-acid batteries for electric bicycle applications10.1016/j.jpowsour.2015.03.139 ↗
36. Techniques for jar formation of valve-regulated lead–acid batteries10.1016/S0378-7753(02)00706-1 ↗
37. Optimal design of absorptive glass mat (AGM) separator with fastest electrolyte uptake using X-ray micro-computed tomography10.1016/j.est.2018.11.026 ↗
38. Synthetic fibre reinforcement of absorptive glass-mat separators for valve-regulated lead–acid batteries10.1016/S0378-7753(99)00012-9 ↗
39. Use of synthetic fibre reinforcement for improving the performance of AGM separators for VRLA batteries10.1016/j.jpowsour.2003.11.030 ↗
40. Development of high power VRLA batteries using novel materials and processes10.1016/S0378-7753(02)00711-5 ↗
41. Adsorption of gases in multimolecular layers10.1021/ja01269a023 ↗
42. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Provisional)10.1351/pac198254112201 ↗
43. The use of nitrogen adsorption for the characterisation of porous materials10.1016/S0927-7757(01)00612-4 ↗
44. Russell · 2006
45. Erdogan · 2011
46. Theoretical orientation density function of spunbonded nonwoven fabric10.1177/004051750107100607 ↗
47. Effect of fiber orientation on pore size characteristics of nonwoven structures10.1002/app.32608 ↗
48. Bulk and physical properties of needle-punched nonwoven fabrics
49. Numbers of fiber-to-fiber contacts in general fiber assemblies10.1177/004051757704700104 ↗
50. Characterisation of separator papers for use in valve regulated lead/acid batteries10.1016/S0378-7753(01)00925-9 ↗
51. Modeling the compression-induced morphological behavior of nonwoven materials10.1007/s10853-011-6055-x ↗
52. Vaidya · 2002
53. White · 2007 · 112
54. Nonwoven fabric studies 1: Part III: the anisotropy of nonwoven fabrics 2, text
55. Image formation by fibers and fiber assemblies, Text
56. Measuring fiber orientation in nonwovens part V: real webs, Text
57. Measuring fiber orientation in nonwovens Part III: Fourier transform10.1177/004051759706700211 ↗
58. Measuring fiber orientation in nonwovens: Part I: Simulation10.1177/004051759606601107 ↗
59. Measuring fibre orientation in nonwovens, part II: direct tracking10.1177/004051759706700304 ↗
60. Measuring fiber orientation in nonwovens Part IV: flow field analysis10.1177/004051759706700304 ↗
61. Determination of fiber orientation of cellulosic samples by x-ray diffraction10.1002/app.1975.070190922 ↗
62. Method and device for monitoring fiber orientation distribution and web uniformity on running webs of paper and nonwovens based on light diffraction phenomenon
63. Three-dimensional imaging of electrospun fiber mats using confocal laser scanning microscopy and digital image analysis10.1007/s10853-015-8834-2 ↗
64. Tomographic approaches to nonwovens structure definition
65. Measuring particle deposition within fibrous filter media by magnetic resonance imaging
66. A realistic approach for modeling permeability of fibrous media: 3-D imaging coupled with CFD simulation10.1016/j.ces.2007.09.020 ↗
67. In situ monitoring of structural changes in nonwoven mats under tensile loading using X-ray computer tomography10.1016/j.compositesa.2014.03.019 ↗
68. Characterization of reinforcing web structures in needle punched nonwoven composites10.1177/002199839903302203 ↗
69. Fibrous filters: non-invasive determination of local 3D fiber structure by MRI
70. Influence of cracks in the microporous layer on the water distribution in a PEM fuel cell investigated by synchrotron radiography10.1016/j.elecom.2013.04.006 ↗
71. Visualization of the water distribution in perforated gas diffusion layers by means of synchrotron X-ray radiography10.1016/j.ijhydene.2012.01.141 ↗
72. Three-dimensional fiber segment orientation distribution using X-ray microtomography10.1017/S1431927614000695 ↗
73. Influence of hydroentangling variables on the properties of bi-layer polyethylene terephthalate–glass fabrics10.1177/0040517512445333 ↗
74. Three-dimensional study of compressed gas diffusion layers using synchrotron X-ray imaging10.1016/j.jpowsour.2013.12.062 ↗
75. Automated reconstruction of curvilinear fibres from 3D datasets acquired by X-ray microtomography10.1046/j.1365-2818.2002.01009.x ↗
76. A comparison of micro CT with other techniques used in the characterization of scaffolds10.1016/j.biomaterials.2005.08.035 ↗
77. microCT
78. Structure of a high efficiency glass fiber filter medium10.1080/02786829708965484 ↗
79. Observations of the microscopic structure of fibrous filters10.1016/S0015-1882(97)84332-7 ↗
80. Three dimensional structure of Celgard® microporous membranes10.1016/S0376-7388(00)81364-2 ↗
81. Three-dimensional pore structure analysis of Nano/Microfibrous scaffolds using confocal laser scanning microscopy10.1002/jbm.a.34379 ↗
82. Compression-recovery model of absorptive glass mat (AGM) separator guided by X-ray micro-computed tomography analysis10.1016/j.jpowsour.2017.08.055 ↗
83. Deconstructing three-dimensional (3D) structure of absorptive glass mat (AGM) separator to tailor pore dimensions and amplify electrolyte uptake10.1016/j.jpowsour.2018.02.072 ↗
84. Review of thermally point-bonded nonwovens: materials, processes, and properties10.1002/app.22858 ↗
85. Estimation of fiber orientation and length in fiber assemblies10.1177/004051757804800601 ↗
86. A modified analysis of the microstructural characteristics of general fiber assemblies10.1177/004051759306300605 ↗
87. Note on the compressibility of wool10.1080/19447024608659279 ↗
88. A discussion of the cross-point theories of Van Wyk10.1080/00405007808631493 ↗
89. Elastic compression of a fiber network10.1115/1.2895906 ↗
90. Leveraging compressive stresses to attenuate the electrical resistivity of buckypaper10.1016/j.carbon.2016.08.093 ↗
91. A modified theory of fiber contact in general fiber assemblies10.1177/004051759406400905 ↗
92. Fiber contact in fiber assemblies10.1177/004051759506501010 ↗
93. Inter-fibre contacts in random fibrous materials: experimental verification of theoretical dependence on porosity and fibre width10.1007/PL00021935 ↗
94. A microscopic study of fibre-fibre contacts in paper
95. Extraction of fibre network architecture by X-ray tomography and prediction of elastic properties using an affine analytical model10.1016/j.actamat.2011.07.051 ↗
96. In situ experiments with X ray tomography: an attractive tool for experimental mechanics10.1007/s11340-010-9333-7 ↗
97. In-plane conduction of polymer composite plates reinforced with architectured networks of copper fibres10.1007/s10853-011-6126-z ↗
98. Finding fibres and their contacts within 3D images of disordered fibrous media10.1016/j.compscitech.2013.09.023 ↗
99. Kameswara Rao · 2018
100. Effects of compression on recombinant battery separator mats in valve-regulated lead–acid batteries10.1016/S0378-7753(97)02782-1 ↗