journal article·2019-03Open access

Stabilizing Na-metal batteries with a manganese oxide cathode using a solid-state composite electrolyte

Yu-Qi Lyu, Jing Yu, Junxiong Wu, Mohammed B. Effat, Francesco Ciucci

Abstract

Abstract The dissolution of Mn ions from Mn-containing cathodes and the growth of Na dendrites are two critical issues that deteriorate the life time of Na batteries. In this work, we develop a novel solid-state composite-polymer-electrolyte based on a polyvinylidene fluoride matrix and Na3Zr2Si2PO12 fillers to simultaneously tackle these two problems. Elemental and morphology analysis show that the composite-polymer-electrolyte effectively impedes the dissolution and migration of Mn ions from the Na0.67MnO2 cathode as well as facilitates the uniform deposition of Na on the anode. A facile interface modification is applied to improve the contact between the composite-polymer-electrolyte and electrodes, which reduces the interfacial resistances and greatly delays the growth of Na dendrites. Consequently, the Na0.67MnO2/Na cell with the composite-polymer-electrolyte displays a significant improvement in cyclic stability and rate performance, without sacrificing the specific capacity, compared to that of a cell using an organic-liquid-electrolyte. Therefore, this work provides an effective way to improve the cycle life of Na batteries by stabilizing both electrodes with a composite-polymer-electrolyte and can be readily applied to other batteries, e.g. Li batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Sodium‐ion batteries10.1002/adfm.201200691 ↗
2. Na-ion batteries, recent advances and present challenges to become low cost energy storage systems10.1039/c2ee02781j ↗
3. Room-temperature stationary sodium-ion batteries for large-scale electric energy storage10.1039/c3ee40847g ↗
4. Voltage, stability and diffusion barrier differences between sodium-ion and lithium-ion intercalation materials10.1039/c1ee01782a ↗
5. Manganese-based P2-type transition metal oxides as sodium-ion battery cathode materials10.1149/2.0201514jes ↗
6. Na0.67Mn1− XMgXO2 (0≤ X≤ 0.2): a high capacity cathode for sodium-ion batteries10.1039/C4EE00465E ↗
7. Synthesis and characterization of high-temperature hexagonal P2-Na0.6MnO2 and its electrochemical behaviour as cathode in sodium cells10.1039/b108830k ↗
8. P2-Type NaX[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries10.1038/nmat3309 ↗
9. High-performance P2-phase Na2/3Mn0.8Fe0.1Ti0.1O2 cathode material for ambient-temperature sodium-ion batteries10.1021/acs.chemmater.5b03276 ↗
10. Robust graphene layer modified Na2MnP2O7 as a durable high-rate and high energy cathode for Na-ion batteries10.1016/j.ensm.2018.06.013 ↗
11. Ultimate limits to intercalation reactions for lithium batteries10.1021/cr5003003 ↗
12. Dissolution, migration, and deposition of transition metal ions in Li-ion batteries exemplified by Mn-based cathodes–a critical review10.1039/C7EE03122J ↗
13. Stabilizing a high-energy-density rechargeable sodium battery with a solid electrolyte10.1016/j.chempr.2018.01.007 ↗
14. Capacity fading on cycling of 4 V Li/LiMn2O4 cells10.1149/1.1837870 ↗
15. Dissolution of spinel oxides and capacity losses in 4 V Li/LiXMn2O4 cells10.1149/1.1836981 ↗
16. Complete blocking of Mn3+ ion dissolution from a LiMn2O4 spinel intercalation compound by Co3o4 coating10.1039/b101677f ↗
17. P2-Type transition metal oxides for high performance Na-ion battery cathodes10.1039/C7TA04515H ↗
18. On the oxidation state of manganese ions in Li-ion battery electrolyte solutions10.1021/jacs.6b10781 ↗
19. Electrode materials for rechargeable sodium‐ion batteries: potential alternatives to current lithium‐ion batteries10.1002/aenm.201200026 ↗
20. Mn (II) deposition on anodes and its effects on capacity fade in spinel lithium manganate–carbon systems10.1038/ncomms3437 ↗
21. Manganese in graphite anode and capacity fade in Li ion batteries10.1021/jp507833u ↗
22. Rate dependent performance related to crystal structure evolution of Na0.67Mn0.8Mg0.2O2 in a sodium-ion battery10.1021/acs.chemmater.5b02142 ↗
23. High voltage Mg-doped Na0. 67Ni0.3–XMgXMn0.7O2 (X= 0.05, 0.1) Na-ion cathodes with enhanced stability and rate capability10.1021/acs.chemmater.6b01935 ↗
24. Unexpected effects of zirconium-doping in the high performance sodium manganese-based layer-tunnel cathode10.1039/C8TA04818E ↗
25. Environmentally stable interface of layered oxide cathodes for sodium-ion batteries10.1038/s41467-017-00157-8 ↗
26. Cu-doped P2-Na0.5Ni0.33Mn0.67O2 encapsulated with MgO as a novel high voltage cathode with enhanced Na-storage properties10.1039/C6TA10334K ↗
27. Layered P2-Na2/3[Ni1/3Mn2/3]O2 as high-voltage cathode for sodium-ion batteries: the capacity decay mechanism and Al2O3 surface modification10.1016/j.nanoen.2016.06.026 ↗
28. Multifunctional conducing polymer coated Na1+XMnFe(cn)6 cathode for sodium-ion batteries with superior performance via a facile and one-step chemistry approach10.1016/j.nanoen.2015.02.019 ↗
29. Na2MnSiO4 as an attractive high capacity cathode material for sodium-ion battery10.1016/j.jpowsour.2017.05.069 ↗
30. A ceramic-pvdf composite membrane with modified interfaces as an ion-conducting electrolyte for solid-state lithium-ion batteries operating at room temperature
31. Reshaping lithium plating/stripping behavior via bifunctional polymer electrolyte for room-temperature solid Li metal batteries10.1021/jacs.6b10088 ↗
32. Plating a dendrite-free lithium anode with a polymer/ceramic/polymer sandwich electrolyte10.1021/jacs.6b05341 ↗
33. Dendrite‐free, high‐rate, long‐life lithium metal batteries with a 3d cross‐linked network polymer electrolyte10.1002/adma.201604460 ↗
34. Solid‐state sodium batteries10.1002/aenm.201703012 ↗
35. Sodium metal anodes for room-temperature sodium-ion batteries: applications, challenges and solutions10.1016/j.ensm.2018.04.014 ↗
36. Recent progress of the solid‐state electrolytes for high‐energy metal‐based batteries10.1002/aenm.201702657 ↗
37. Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
38. Challenges and issues facing lithium metal for solid-state rechargeable batteries10.1016/j.jpowsour.2017.04.018 ↗
39. Synergistic coupling between Li6.75La3Zr1.75Ta0.25O12 and poly (vinylidene fluoride) induces high ionic conductivity, mechanical strength, and thermal stability of solid composite electrolytes10.1021/jacs.7b06364 ↗
40. Designing 3d nanostructured garnet frameworks for enhancing ionic conductivity and flexibility in composite polymer electrolytes for lithium batteries10.1016/j.ensm.2018.03.016 ↗
41. Na3.4Zr1.8Mg0.2Si2PO12 filled poly (ethylene oxide)/Na(CF3SO2)2N as flexible composite polymer electrolyte for solid-state sodium batteries10.1016/j.jpowsour.2017.10.083 ↗
42. A ceramic/polymer composite solid electrolyte for sodium batteries10.1039/C6TA07590H ↗
43. A hybrid solid electrolyte for flexible solid-state sodium batteries10.1039/C5EE01941A ↗
44. Properties and applications of the Β phase poly (vinylidene fluoride)10.3390/polym10030228 ↗
45. Determination of the crystalline phases of poly (vinylidene fluoride) under different preparation conditions using differential scanning calorimetry and infrared spectroscopy10.1002/app.12267 ↗
46. Electrochemical performance of Na/nafepo 4 sodium-ion batteries with ionic liquid electrolytes10.1039/c3ta15273a ↗
47. Electrolyte design strategies and research progress for room-temperature sodium-ion batteries10.1039/C7EE00524E ↗
48. Methods and protocols for electrochemical energy storage materials research10.1021/acs.chemmater.6b02726 ↗
49. A biobased composite gel polymer electrolyte with functions of lithium dendrites suppressing and manganese ions trapping10.1002/aenm.201702561 ↗
50. Manganese oxide thin film preparation by potentiostatic electrolyses and electrochromism10.1149/1.1393515 ↗
51. In situ preparation of Ca0.5Mn0.5O/C as a novel high-activity catalyst for the oxygen reduction reaction10.1039/C6TA07130A ↗
52. Enabling room-temperature solid-state lithium-metal batteries with fluoroethylene carbonate-modified plastic crystal interlayers10.1016/j.ensm.2018.08.021 ↗
53. Direct observation of lithium dendrites inside garnet-type lithium-ion solid electrolyte10.1016/j.elecom.2015.05.001 ↗
54. Characterizing the Li–Li7La3Zr2O12 interface stability and kinetics as a function of temperature and current density10.1016/j.jpowsour.2015.10.053 ↗