Discharge performance and behavior of Mg-xSr binary alloys as novel anodes for primary Mg-Air cells
Source abstract
Abstract
Novel as-cast magnesium-strontium (Mg- xSr, x = 0.2, 1.0 and 2.0 wt.%) anodes for Mg-Air cells are systematically investigated by microstructure characterization, self-discharge experiments, electrochemical techniques and discharge tests. With Sr added in magnesium alloy, granular and strip Mg 17Sr 2-phases precipitate at grain interior and boundaries, respectively. Mg 17Sr 2 -phase acts as a weak anode with α-Mg in micro-galvanic couple, promoting the formation of initial discharge sites; meanwhile, Sr element modifies the composition and morphology of passivation film and discharge products. However, with Sr content increasing, continuously distributed coarse-second-phases produce stronger micro-galvanic corrosion effect and priority discharge at grain boundaries, enhancing the parasitical self-discharge hydrogen evolution rate (HER) and “Chunk effect” (CE). Mg-0.2Sr exhibits the highest anodic efficiency of 60.18 % and specific capacity of 1342.28 mA h g −1 at 20 mA cm −2, which is attributed to the even distribution of fine Mg 17Sr 2 and the uniform dissolution of α-Mg matrix. Therefore, Sr is an optional micro-alloying element for improving discharge performance of Mg-anode for Mg-Air cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Latest research advances on magnesium and magnesium alloys worldwide10.1016/j.jma.2020.02.003 ↗
2. Clarifying the roles of grain boundary and grain orientation on the corrosion and discharge processes of α-Mg based Mg-Li alloys for primary Mg-air batteries10.1016/j.jmst.2020.05.067 ↗
3. A corrosion resistant die-cast Mg-9Al-1Zn anode with superior discharge performance for Mg-air battery10.1016/j.matdes.2020.108931 ↗
4. Electrochemical properties and discharge performance of Mg-3Sn-xCa alloy as a novel anode for Mg-air battery10.1016/j.jallcom.2022.167849 ↗
5. Elucidating the dependence of electrochemical behavior and discharge performance on the grain structure of lean Mg-0.3Bi-0.3Ag-0.3In anodes in primary Mg-air battery10.1016/j.jpowsour.2023.232856 ↗
6. Mg-Ca binary alloys as anodes for primary Mg-air batteries10.1016/j.jpowsour.2018.05.090 ↗
7. Tailoring the microstructure of Mg-Al-Sn-RE alloy via friction stir processing and the impact on its electrochemical discharge behaviour as the anode for Mg-air battery
8. Influence of heat treatment on the discharge performance of Mg-Al and Mg-Zn alloys as anodes for the Mg-air battery10.1016/j.cej.2021.133797 ↗
9. Effect of Ce content on performance of AZ31 magnesium alloy anode in air battery10.1016/j.jallcom.2021.161914 ↗
10. Microstructure and discharge performance of Mg-La alloys as the anodes for primary magnesium-air batteries10.1016/j.jallcom.2022.165803 ↗
11. Discharge performance of extruded Mg-Bi binary alloys as anodes for primary Mg-air batteries10.1016/j.jallcom.2021.161271 ↗
12. Discharge properties and electrochemical behaviors of AZ80-La-Gd magnesium anode for Mg-air battery10.1016/j.jma.2020.07.008 ↗
13. Linking the discharge behavior and microstructure of ternary Mg–Ca–Zn alloy anodes for magnesium-air cells10.1016/j.jpowsour.2023.233067 ↗
14. In vitro evaluation of MgSr and MgCaSr alloys via direct culture with bone marrow derived mesenchymal stem cells10.1016/j.actbio.2018.03.049 ↗
15. The standard electrode potentials of the elements
16. Comparation about efficiency of Al–10Sr and Mg–10Sr master alloys to grain refinement of AZ31 magnesium alloy10.1007/s10853-007-2035-6 ↗
17. Mg–Zr–Sr alloys as biodegradable implant materials10.1016/j.actbio.2012.04.028 ↗
18. Addition of Zn to the ternary Mg–Ca–Sr alloys significantly improves their antibacterial properties10.1039/C5TB01319D ↗
19. Effect of trace HA on microstructure, mechanical properties and corrosion behavior of Mg-2Zn-0.5Sr alloy10.1016/j.jmst.2017.06.013 ↗
20. In vitro and in vivo studies on degradation and bone response of Mg-Sr alloy for treatment of bone defect10.1080/10667857.2018.1452587 ↗
21. Biocompatibility and biodegradability of Mg–Sr alloys: the formation of Sr-substituted hydroxyapatite10.1016/j.actbio.2012.07.045 ↗
22. Corrosion resistance of Mg–5Al–xSr alloys10.1016/j.jallcom.2011.01.187 ↗
23. Microstructure, mechanical properties, bio-corrosion properties and cytotoxicity of as-extruded Mg-Sr alloys10.1016/j.msec.2016.04.012 ↗
24. Effect of strontium on mechanical properties and corrosion resistance of AZ91D10.4028/www.scientific.net/MSF.546-549.567 ↗
25. Hou · 2007 · vol. 7 · 560
26. Effect of small addition of strontium on microstructure and electrochemical performance of Mg-Mn sacrificial anode
27. A hydrogen evolution method for the estimation of the corrosion rate of magnesium alloys10.1007/978-3-319-48099-2_90 ↗
28. Microstructure, mechanical and corrosion properties of Mg–Dy–Gd–Zr alloys for medical applications10.1016/j.actbio.2013.03.017 ↗
29. Influence of the β-phase morphology on the corrosion of the Mg alloy AZ9110.1016/j.corsci.2008.04.010 ↗
30. Effect of the microstructure parameters on the corrosion characteristics of Mg-Zn-Ca alloy with columnar structure10.1016/j.jma.2021.12.017 ↗
31. Magnesium alloys as anodes for neutral aqueous magnesium-air batteries10.1016/j.jma.2021.04.011 ↗
32. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
33. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
34. The effect of Sr addition on the microstructure and corrosion behaviour of a Mg-Zn-Ca alloy10.1016/j.surfcoat.2022.128328 ↗
35. Investigation of the mechanical and degradation properties of Mg–Sr and Mg–Zn–Sr alloys for use as potential biodegradable implant materials10.1016/j.jmbbm.2011.07.018 ↗
36. Influence of Sr on microstructure evolution, mechanical and corrosion properties of extruded Mg-2Zn-0.5Ca alloy
37. Influence of composition and processing on the corrosion of magnesium alloys containing binary and ternary additions of zinc and strontium10.5006/1417 ↗
38. The high corrosion-resistance of ultra-high purity Mg–Ge alloy and its discharge performance as anode for Mg–air battery10.1016/j.electacta.2023.142127 ↗
39. Initial micro-galvanic corrosion behavior between Mg2Ca and α-Mg via quasi-in situ SEM approach and first-principles calculation10.1016/j.jma.2021.06.017 ↗
40. Surface properties and work function changes induced by atomic oxygen adsorbed on HfC(1 1 1) surface10.1016/j.apsusc.2015.09.100 ↗
41. Surface energy and work function of fcc and bcc crystals
42. Computational design of Mg alloys with minimal galvanic corrosion10.1016/j.jma.2021.06.019 ↗
43. Mg-Ca binary alloys as anodes for primary Mg-air batteries10.1016/j.jpowsour.2018.05.090 ↗
44. Micro-alloyed Mg–Al–Sn anode with refined dendrites used for Mg-air battery10.1016/j.jpowsour.2023.233569 ↗
45. Clarifying the decisive factors for utilization efficiency of Mg anodes for primary aqueous batteries10.1016/j.jpowsour.2019.227201 ↗
46. AZ31 magnesium alloy with ultrafine grains as the anode for Mg-air battery10.1016/j.electacta.2021.138135 ↗
47. A comprehensive review of the development of magnesium anodes for primary batteries10.1039/D1TA01471D ↗
48. Linking the microstructure of a heat-treated WE43 Mg alloy with its corrosion behavior10.1016/j.corsci.2015.09.005 ↗
49. Mechanical and corrosion properties of extruded Mg–Zr–Sr alloys for biodegradable implant applications10.1016/j.msea.2021.142192 ↗