journal article·2024-02Open access

Novel silicon nanoparticles-based carbonized polypyrrole nanotube composites as anode materials for Li-ion batteries

Gabriela Soukupová, Martin Jindra, Tomáš Lapka, Zuzana Živcová Vlčková, Marcela Dendisová, Jan Prokeš, Otakar Frank, Fatima Hassouna

Abstract

The development of elastic nanostructured Si-based anodes holds promise for advancing lithium-ion batteries due to the high theoretical specific capacity exhibited by Si. Combining nanostructured Si with C proves to be a successful strategy in addressing the challenges tied to the substantial volume expansion of Si during lithiation. In this work, a novel Si-based anode is fashioned through a simple and universal strategy, integrating Si nanoparticles with 1D nano-carbonaceous fillers (CPPy-NT) featuring nanotubular morphology and N atoms, and a water-based binder (poly(acrylic acid)). CPPy-NT are derived by carbonizing pre-synthesized polypyrrole nanotubes (PPy-NT). A clear correlation is established among the carbonization temperature for CPPy-NT preparation, N content in CPPy-NT, electrical conductivity, and the electrochemical performance of the ensuing Si/CPPy-NT anode. For comparative analysis, the electrochemical properties of the Si-based anode employing Super P (commercial carbon black) or PPy-NT are contrasted with those of Si/CPPy-NT. Notably, the Si/CPPy-NT anode with CPPy-NT bearing the highest amount of graphitic N sites exhibits a substantial improvement in initial charge capacity (approximately 2200 mAh g−1) and enhanced cycling stability. These findings underscore the potential to elevate the electrochemical activity of the C filler by carefully optimizing morphology, conductivity, and the incorporation of an appropriate amount of graphitic N.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (97)

Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Research progress on coating structure of silicon anode materials for lithium-ion batteries10.1002/cssc.202101837 ↗
3. Structure design and mechanism analysis of silicon anode for lithium-ion batteries锂离子电池中硅负极材料的设计及机理分析研究进展10.1007/s40843-019-9464-0 ↗
4. Surface binding of polypyrrole on porous silicon hollow nanospheres for Li-ion battery anodes with high structure stability10.1002/adma.201401937 ↗
5. Alloy negative electrodes for Li-ion batteries10.1021/cr500207g ↗
6. Surface and interface engineering of silicon-based anode materials for lithium-ion batteries10.1002/aenm.201701083 ↗
7. Core–shell coating silicon anode Interfaces with coordination Complex for stable lithium-ion batteries10.1021/acsami.5b12392 ↗
8. Liu · 2022 · 1
9. Si anode for next-generation lithium-ion battery. Current Opinion in Electrochemistry
10. Nanoscale silicon as anode for Li-ion batteries: the fundamentals, promises, and challenges10.1016/j.nanoen.2015.08.025 ↗
11. Si-based anode Materials for Li-ion batteries: a mini review10.1007/s40820-014-0008-2 ↗
12. Nanostructured silicon for high capacity lithium battery anodes10.1039/C0EE00281J ↗
13. Stress-relieving defects enable ultra-stable silicon anode for Li-ion storage10.1016/j.nanoen.2020.104568 ↗
14. Effects of nitrogen doping on Si/carbon composite anode derived from Si wastes as potential active materials for Li ion batteries. Journal of Alloys and Compounds
15. Novel Si@C/P anode materials with improved cyclability and rate capacity for lithium-ion batteries10.1016/j.jallcom.2021.163237 ↗
16. The critical role of carbon in marrying silicon and graphite anodes for high-energy lithium-ion batteries10.1002/cey2.2 ↗
17. Characteristics and electrochemical performances of silicon/carbon nanofiber/graphene composite films as anode materials for binder-free lithium-ion batteries10.1038/s41598-020-79205-1 ↗
18. Silicon-Carbon composite anodes from industrial battery grade silicon. Scientific Reports
19. Anodes for Li-ion batteries prepared from microcrystalline silicon and enabled by binder’s chemistry and pseudo-self-healing10.1038/s41598-020-70001-5 ↗
20. Towards reducing carbon content in silicon/carbon anodes for lithium ion batteries10.1016/j.carbon.2016.10.058 ↗
21. A comparative study of polyacrylic acid (PAA) and carboxymethyl cellulose (CMC) binders for Si-based electrodes. Electrochimica Acta
22. Advances of polymer binders for silicon-based anodes in high energy density lithium-ion batteries10.1002/inf2.12185 ↗
23. Heteroatom-doped carbon networks enabling robust and flexible silicon anodes for high energy Li-ion batteries. Journal of Materials Chemistry A
24. Freestanding porous Silicon@Heteroatom-doped porous carbon fiber anodes for high-performance lithium-ion batteries10.1021/acsaem.2c01898 ↗
25. Effect of nitrogen on the electrochemical performance of core–shell structured Si/C nanocomposites as anode materials for Li-ion batteries10.1016/j.electacta.2012.11.092 ↗
26. Electrochemical properties of nitrogen-doped carbon nanotube anode in Li-ion batteries10.1016/j.carbon.2011.05.043 ↗
27. Nitrogen-doped graphitic layers Deposited on silicon Nanowires for efficient lithium-ion battery anodes. The journal of physical chemistry C
28. Three-dimensional network of nitrogen-doped carbon matrix-encapsulated Si nanoparticles/carbon nanofibers hybrids for lithium-ion battery anodes with excellent capability10.1038/s41598-022-20026-9 ↗
29. High performance nitrogen-doped Si/C as the anode Material of lithium-ion batteries. Russian journal of electrochemistry
30. Stable Li-ion battery anodes by in-situ polymerization of conducting hydrogel to conformally coat silicon nanoparticles10.1038/ncomms2941 ↗
31. A review of rational design and investigation of binders applied in silicon-based anodes for lithium-ion batteries. Journal of Power Sources
32. A commercial conducting polymer as both binder and conductive additive for silicon nanoparticle-based lithium-ion battery negative electrodes10.1021/acsnano.6b00218 ↗
33. Electrical and electrochemical properties of conducting polymers10.3390/polym9040150 ↗
34. Conductive polymers: towards a smart biomaterial for tissue engineering10.1016/j.actbio.2014.02.015 ↗
35. Electrically conducting polymers
36. Conducting polyaniline/poly (acrylic acid)/phytic acid multifunctional binders for Si anodes in lithium ion batteries10.1007/s11581-019-03122-1 ↗
37. Kinetics and electrochemical evolution of binary silicon–polymer systems for lithium ion batteries10.1039/C7RA06023H ↗
38. Polyaniline-assisted synthesis of Si@C/RGO as anode material for rechargeable lithium-ion batteries10.1021/am506404b ↗
39. Si/polyaniline-based porous carbon composites with an enhanced electrochemical performance as anode materials for Li-ion batteries. Ionics
40. A nanofibrous polypyrrole/silicon composite derived from cellulose substance as the anode material for lithium-ion batteries. Chemical Communications
41. Largely improved battery performance using a microsized silicon skeleton caged by polypyrrole as anode10.1021/acsnano.9b06301 ↗
42. Study of silicon/polypyrrole composite as anode materials for Li-ion batteries. Journal of Power Sources
43. Evolution of physical and electrochemical properties of polypyrrole during extended oxidation. Journal of the electrochemical society
44. Overoxidation of intrinsically conducting polymers10.3390/polym14081584 ↗
45. Elaboration and properties of nanofibrillated cellulose composites with polypyrrole nanotubes or their carbonized analogs10.1016/j.synthmet.2021.116806 ↗
46. Polypyrrole nanotubes and their carbonized analogs: synthesis, characterization, gas sensing properties10.3390/s16111917 ↗
47. Conducting polypyrrole nanotubes: a review10.1007/s11696-018-0394-x ↗
48. Facile fabrication of functional polypyrrole nanotubes via a reactive self-degraded template10.1002/marc.200500514 ↗
49. Polypyrrole nanotubes: The tuning of morphology and conductivity10.1016/j.polymer.2017.02.064 ↗
50. Comparison of carbonized and activated polypyrrole globules, nanofibers, and nanotubes as conducting nanomaterials and adsorbents of organic dye10.1016/j.cartre.2021.100068 ↗
51. Raman spectroscopy of carbon materials and their composites: graphene, nanotubes and fibres10.1016/j.pmatsci.2023.101089 ↗
52. Resonance Raman spectroscopy of conducting polypyrrole nanotubes: disordered surface versus ordered body. The journal of physical chemistry A
53. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
54. Raman and XPS studies of ammonia sensitive polypyrrole nanorods and nanoparticles. Scientific Reports
55. Relationship between polypyrrole morphology and electrochemical activity towards oxygen reduction reaction10.1039/c2cc30871a ↗
56. Conversion of conducting polypyrrole nanostructures to nitrogen-containing carbons and its impact on the adsorption of organic dye10.1039/D0MA00730G ↗
57. Structure and electrical conductivity of nitrogen-doped carbon nanofibers10.1016/j.carbon.2009.02.034 ↗
58. The lithiation process and Li diffusion in amorphous SiO2 and Si from first-principles10.1016/j.electacta.2019.135344 ↗
59. Electrochemical reduction of nano-SiO2 in hard carbon as anode material for lithium ion batteries. Electrochemistry Communications
60. Challenges and recent progress on silicon-based anode materials for next-generation lithium-ion batteries10.1002/sstr.202100009 ↗
61. Silicon as a potential anode material for Li-ion batteries: where size, geometry and structure matter10.1039/C5NR05116A ↗
62. Enhancing the electrochemical properties of a Si anode by introducing cobalt metal as a conductive buffer for lithium-ion batteries. Journal of Alloys and Compounds
63. Conductive polyacrylic acid-polyaniline as a multifunctional binder for stable organic quinone electrodes of lithium-ion batteries10.1021/acsami.0c10347 ↗
64. Electrodeposited copolymer films with tunable conductivity
65. Inkjet-printed silicon as high performance anodes for Li-ion batteries10.1016/j.nanoen.2017.04.041 ↗
66. Generation and evolution of the solid electrolyte interphase of lithium-ion batteries10.1016/j.joule.2019.08.018 ↗
67. Quantifying capacity loss due to solid-electrolyte-interphase layer formation on silicon negative electrodes in lithium-ion batteries10.1016/j.jpowsour.2012.05.004 ↗
68. Synthesis and electrochemical performance of electrostatic self-assembled nano-silicon@N-doped reduced graphene oxide/carbon nanofibers composite as anode material for lithium-ion batteries10.3390/molecules26164831 ↗
69. Adjusting the interface structure of graphdiyne by H and F co-doping for enhanced capacity and stability in Li-ion battery10.1016/j.ensm.2020.04.013 ↗
70. Spheres of graphene and carbon nanotubes embedding silicon as mechanically resilient anodes for lithium-ion batteries10.1021/acs.nanolett.2c00341 ↗
71. Electrochemical insertion of lithium into multiwalled carbon nanotube/silicon composites produced by ballmilling10.1149/1.2213528 ↗
72. Flexible and robust silicon/carbon nanotube anodes exhibiting high areal capacities. Journal of colloid and interface science
73. Silicon doped carbon nanotubes as high energy anode for lithium-ion batteries10.1016/j.mtcomm.2022.103158 ↗
74. Silicon@Natural nitrogen-doped biomass carbon composites derived from “silicon tofu” as green and efficient anode materials for lithium-ion batteries10.1021/acssuschemeng.1c03879 ↗
75. Improving the electrochemical performance of Si anode by using N-doped carbon materials in lithium-ion batteries10.1007/s11581-021-04362-w ↗
76. Rice husk-derived hierarchical silicon/nitrogen-doped carbon/carbon nanotube spheres as low-cost and high-capacity anodes for lithium-ion batteries10.1016/j.nanoen.2016.04.043 ↗
77. Solid electrolyte interphase on native oxide-terminated silicon anodes for Li-ion batteries10.1016/j.joule.2018.12.013 ↗
78. Silicon derived from glass bottles as anode materials for lithium ion full cell batteries10.1038/s41598-017-01086-8 ↗
79. Influence of carbonate solvents on solid electrolyte interphase composition over Si electrodes monitored by in situ and ex situ spectroscopies10.1021/acsomega.1c04226 ↗
80. Hollow carbon nanospheres/silicon/alumina core-shell film as an anode for lithium-ion batteries. Scientific Reports
81. Tracking the evolution of processes occurring in silicon anodes in lithium ion batteries by 3D visualization of relaxation times. Journal of Electroanalytical Chemistry
82. Beyond thin films: clarifying the impact of c-Li15Si4 formation in thin film, nanoparticle, and porous Si electrodes. ACS applied materials & interfaces
83. An in situ X-ray diffraction study of the reaction of Li with crystalline Si10.1149/1.2409862 ↗
84. Scalable synthesis of nano-silicon from beach sand for long cycle life Li-ion batteries10.1038/srep05623 ↗
85. Waste windshield-derived silicon/carbon nanocomposites as high-performance lithium-ion battery anodes
86. In situ XRD and electrochemical study of the reaction of lithium with amorphous silicon10.1149/1.1739217 ↗
87. Model studies on the solid electrolyte interphase formation on graphite electrodes in ethylene carbonate and dimethyl carbonate: highly oriented pyrolytic graphite10.1002/celc.201900909 ↗
88. Importance of reduction and oxidation stability of high voltage electrolytes and additives
89. In situ Raman analyses of electrode materials for Li-ion batteries10.3934/matersci.2018.4.650 ↗
90. Kerr gated Raman spectroscopy of LiPF6 salt and LiPF6-based organic carbonate electrolyte for Li-ion batteries. Physical Chemistry Chemical Physics
91. Synergistic film-forming effect of oligo(ethylene oxide)-functionalized trimethoxysilane and propylene carbonate electrolytes on graphite anode10.1007/s11581-016-1909-5 ↗
92. Electrolyte solvation structure at solid–liquid interface probed by nanogap surface-enhanced Raman spectroscopy10.1021/acsnano.8b05038 ↗
93. Belharouak · 2012
94. Application of electrochemical impedance spectroscopy to commercial Li-ion cells: a review10.1016/j.jpowsour.2020.228742 ↗
95. The low temperature performance of Li-ion batteries10.1016/S0378-7753(02)00618-3 ↗
96. Control and optimization of the electrochemical and mechanical properties of the solid electrolyte interphase on silicon electrodes in lithium ion batteries10.1002/aenm.201502302 ↗
97. Understanding solid electrolyte interface film formation on graphite electrodes10.1149/1.1414946 ↗