journal article·2023-11

Development of low-carbon energy storage material: Electrochemical behavior and discharge properties of iron-bearing Al–Li-based alloys as Al–air battery anodes

Guangzong Zhang, Changfeng Wang, Siqi Yin, Da Teng, Renguo Guan

Publisher page

Abstract

With inevitable introduction of Fe in aluminum processing, a method for achieving high-value utilization of iron-bearing aluminum-based alloys is essential. Aluminum–air batteries are among the most promising power sources and have attracted the attention of researchers. In this study, the electrochemical behavior and discharge properties of Al–0.5Fe and Al–0.5Mn–0.5Fe–0.1Sn–xLi (x = 0, 1, 2, and 3 wt %) alloys as Al–air battery anodes are investigated in 4 M NaOH. Using x-ray diffraction (XRD) and scanning electron microscopy (SEM), the constituents and distributions of the main phases are discussed. Alloying improves electrochemical behavior and discharge properties of Al–0.5Fe. The static and dynamic electrochemical experiments indicate that Al–0.5Mn–0.5Fe–0.1Sn–2Li exhibits the best corrosion resistance. The discharge performances of the five alloys show that the average voltages decrease with increasing current density and Li content. Based on the electrochemical and discharge results, Al–0.5Mn–0.5Fe–0.1Sn–2Li is an excellent candidate for use in Al–air battery anodes, reaching a peak anodic efficiency of 77.86% at a relatively high current density of 80 mA cm −2, with a power density and specific energy of 83.60 mW cm −2 and 1618.06 mW h g −1, respectively. The optimal discharge performance is attributed to dispersed AlLi particles and the fragmentation effect of AlLi on the long strip-like Al 6Mn(Fe) phase.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Advancements in Battery Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Aqueous metal-air batteries: fundamentals and applications10.1016/j.ensm.2019.12.011 ↗
2. Mechanistic understanding on the evolution of nanosized Al3Fe phase in Al-Fe alloy during heat treatment and its effect on mechanical properties10.1016/j.msea.2019.02.066 ↗
3. Formation mechanism of nanoscale Al3Fe phase in Al-Fe alloy during semi-solid forming process10.1007/s11663-018-1323-7 ↗
4. Electrochemical behaviors and discharge properties of Al–Mg–Sn–Ca alloys as anodes for Al-air batteries10.1016/j.jpowsour.2021.229724 ↗
5. Synergistic construction of bifunctional interface film on anode via a novel hybrid additive for enhanced alkaline Al-air battery performance10.1016/j.cej.2022.138175 ↗
6. Effect of nonionic surfactant as an electrolyte additive on the performance of aluminum-air battery10.1016/j.jpowsour.2018.11.086 ↗
7. Aluminum-air batteries: a review of alloys, electrolytes and design10.1016/j.jpowsour.2021.229762 ↗
8. Electrolytes for aluminum–air batteries: advances, challenges, and applications10.1039/D2SE01744J ↗
9. The role of micro-naoscale AlSb precipitates in improving the discharge performance of Al-Sb alloy anodes for Al-air batteries10.1016/j.jpowsour.2019.04.012 ↗
10. Effect of calcium on the electrochemical behaviors and discharge performance of Al–Sn alloy as anodes for Al–air batteries10.1016/j.electacta.2021.137833 ↗
11. Modified alkaline electrolyte with 8-hydroxyquinoline and ZnO complex additives to improve Al-air battery10.1016/j.jpowsour.2019.05.077 ↗
12. The role of microstructural evolution in improving energy conversion of Al-based anodes for metal-air batteries10.1016/j.jpowsour.2020.227806 ↗
13. Use of low-cost aluminum in electric energy production10.1016/j.jpowsour.2005.11.097 ↗
14. Effects of the combinative Ca, Sm and La additions on the electrochemical behaviors and discharge performance of the as-extruded AZ91 anodes for Mg-air batteries10.1016/j.jpowsour.2018.12.092 ↗
15. Performance of Al–0.5 Mg–0.02 Ga–0.1 Sn–0.5 Mn as anode for Al–air battery in NaCl solutions10.1016/j.jpowsour.2013.12.053 ↗
16. Electrochemical performance of pure Al, Al-Sn, Al-Mg and Al-Mg-Sn anodes for Al-air batteries10.1016/j.jallcom.2019.151708 ↗
17. Aluminum anode for aluminum-air battery – Part II: influence of in addition on the electrochemical characteristics of Al-Zn alloy in alkaline solution10.1016/j.jpowsour.2017.04.097 ↗
18. Performance of Al-Air batteries based on Al-Ga, Al-In and Al-Sn alloy electrodes10.1149/2.0681510jes ↗
19. Electrochemical performance of melt-spinning Al–Mg–Sn based anode alloys10.1016/j.ijhydene.2017.02.185 ↗
20. Performance of Al-0.6Mg-0.05Ga-0.1Sn-0.1In as anode for Al-Air battery in KOH electrolytes10.1149/2.0871512jes ↗
21. Enhanced performance of Al-0.02Mg-0.01Sn-0.004Bi-0.003In alloy as novel anode for Al-air batteries in alkaline electrolyte10.1016/j.jallcom.2022.166530 ↗
22. Solubility effects of Sn and Ga on the microstructure and corrosion behavior of Al-Mg-Sn-Ga alloy anodes10.1016/j.jallcom.2016.05.090 ↗
23. The effect of zinc on the aluminum anode of the aluminum–air battery10.1016/j.jpowsour.2004.06.043 ↗
24. Effect of Sn and Zn alloying with Al on its electrochemical performance in an alkaline media containing CO2 for Al-air batteries application10.1016/j.ijhydene.2023.03.469 ↗
25. Electrochemical corrosion of an Al-Mg-Cr-Mn alloy containing Fe and Si in inhibited alkaline solutions10.1016/S0378-7753(96)02399-3 ↗
26. High energy efficiency of Al-based anodes for Al-air battery by simultaneous addition of Mn and Sb10.1016/j.cej.2020.128006 ↗
27. The role of Mn in the corrosion behavior of Al-Mn alloys10.5006/1.3577549 ↗
28. Enhanced strength and corrosion resistance of creep-aged AA2050 Al-Li alloy by pre-rolling deformation10.1016/j.matdes.2023.111621 ↗
29. Microstructure and mechanical properties of ultra-lightweight Mg-Li-Al/Al-Li composite produced by accumulative roll bonding at ambient temperature10.1016/j.msea.2020.139494 ↗
30. Analysis of microstructure and high-temperature tensile properties of 2060 Al-Li alloy strengthened by laser shock peening10.1016/j.jallcom.2020.158539 ↗
31. High strength Al–Li alloy development for laser powder bed fusion
32. The precipitation competition of η-series precipitates and δ’ precipitates in Li-containing Al-Zn-Mg-Cu alloys10.1016/j.commatsci.2021.110707 ↗
33. A comprehensive review of the development of magnesium anodes for primary batteries10.1039/D1TA01471D ↗
34. Effect of ultrasonic melt processing and Al-Ti-B on the microstructural refinement of recycled Al alloys10.1016/j.ultsonch.2022.106139 ↗
35. Gao · 2014 · 12
36. Corrosion behavior of a bulk nanocrystalline Al-Fe alloy10.1016/j.corsci.2022.110727 ↗
37. Fe-bearing intermetallics transformation and its influence on the corrosion resistance of Al-Mg-Si alloy weld joints10.1016/j.jmrt.2020.11.077 ↗
38. Influence of cooling rate on the Fe intermetallic formation in an AA6063 Al alloy10.1016/j.jallcom.2012.12.077 ↗
39. Effect of iron-containing intermetallic particles on the corrosion behaviour of aluminum10.1016/j.corsci.2006.01.005 ↗
40. A modified Doyle-Fuller-Newman model enables the macroscale physical simulation of dual-ion batteries10.1016/j.jpowsour.2023.233429 ↗
41. Stepwise optimization of single-ion conducting polymer electrolytes for high-performance lithium-metal batteries10.1016/j.jechem.2023.01.044 ↗
42. Evaluation of AA5052 alloy anode in alkaline electrolyte with organic rare-earth complex additives for aluminum-air batteries10.1016/j.jpowsour.2015.05.104 ↗
43. Influence of specific second phases on corrosion behaviors of Mg-Zn-Gd-Zr alloys10.1016/j.corsci.2019.108419 ↗
44. Improving the corrosion resistance of MgZn1.2GdxZr0.18 (x = 0, 0.8, 1.4, 2.0) alloys via Gd additions10.1016/j.corsci.2020.108962 ↗
45. Dielectric properties of materials showing constant-phase-element (CPE) impedance response10.1149/2.033306jes ↗
46. Investigation of the electrochemical behaviour of AA1050 aluminium alloy in aqueous alkaline solutions using Dynamic Electrochemical Impedance Spectroscopy10.1016/j.jelechem.2016.08.028 ↗
47. Developments in electrode materials and electrolytes for aluminum–air batteries10.1016/j.jpowsour.2013.01.141 ↗