journal article·2023-11Open access

The effect of ink ball milling time on interparticle interactions and ink microstructure and their influence on crack formation in rod-coated catalyst layers

Carlos M. Baez-Cotto, Jason P. Pfeilsticker, Andres O. Godoy, Mariah Batool, Sarah Zaccarine, Min Wang, Olivia Bird, Svitlana Pylypenko, Jasna Jankovic, Michael Ulsh, Scott Mauger

Abstract

This work investigates the influence of ballmilling (sometimes also referred to as jar roller milling) time on cathode catalyst layer (CL) inks and electrode properties using formulations and coating methods relevant for industrial manufacturing. Four CL inks with the same composition were milled for 24, 48, 72, or 96 h. Rheological investigation of these inks showed a reduction of elastic moduli and steady-shear viscosity with continuous ink milling, which is correlated to a decrease in particle-particle interactions as well as formation of smaller agglomerates. Optical microscopy (OM) analysis of the fabricated electrodes revealed a trend in surface crack formation; formulations milled for 24 h contained the lowest average surface crack area percentages of 0.370% at heavy-duty loadings of ∼0.300 mg Pt cm −2 , compared to 2.418% for the ink milled for 96 h. Further characterization of the CL through transmission electron microscopy (TEM) imaging showed a decrease in the mean agglomerate and pore size with milling time. These smaller electrode features were consistent with reduced fracture resistance and, hence, development of larger stresses during drying. Our results highlight the need to consider ink processing as an important component in defect-free CL manufacturing.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. 2022
2. 2020
3. 2022
4. Guided cracking of electrodes by stretching prism-patterned membrane electrode assemblies for high-performance fuel cells10.1038/s41598-018-19861-6 ↗
5. High-performance fuel cell with stretched catalyst-coated membrane: one-step formation of cracked electrode
6. Effects of surface irregularities and interfacial cracks on polymer electrolyte fuel cell performance10.1149/1.3210730 ↗
7. Image recognition of cracks and the effect in the microporous layer of proton exchange membrane fuel cells on performance10.1016/j.energy.2022.126340 ↗
8. Temperature-dependent fatigue crack growth mechanisms of fuel cell membranes10.1016/j.ijfatigue.2021.106554 ↗
9. Visualization, understanding, and mitigation of process-induced-membrane irregularities in gas diffusion electrode-based polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2021.01.186 ↗
10. 4D in situ visualization of electrode morphology changes during accelerated degradation in fuel cells by X-ray computed tomography10.1016/j.jpowsour.2017.03.058 ↗
11. Mitigation of mechanical membrane degradation in fuel cells by controlling electrode morphology: a 4D in situ structural characterization
12. The effect of mechanical fatigue on the lifetimes of membrane electrode assemblies10.1115/1.4000629 ↗
13. Effect of catalyst layer defects on local membrane degradation in polymer electrolyte fuel cells10.1016/j.jpowsour.2016.05.016 ↗
14. Morphological features (defects) in fuel cell membrane electrode assemblies10.1016/j.jpowsour.2005.12.027 ↗
15. Why do drying films crack?10.1021/la049020v ↗
16. The decohesion of thin films from brittle substrates10.1016/0001-6160(88)90282-9 ↗
17. Binder distribution in ceramic greenware during thermolysis10.1111/j.1151-2916.1989.tb09707.x ↗
18. Drying of granular ceramic films: I, effect of processing variables on cracking behavior10.1111/j.1151-2916.1993.tb07762.x ↗
19. Drying of granular ceramic films: II, drying stress and saturation uniformity10.1111/j.1151-2916.1993.tb04014.x ↗
20. Chemical solution routes to single-crystal thin films10.1126/science.273.5277.903 ↗
21. Cracking in drying colloidal films10.1103/PhysRevLett.98.218302 ↗
22. Cracking in drying colloidal films of flocculated dispersions10.1021/la804331c ↗
23. Parametric dependence studies on cracking of clay10.1016/j.physa.2008.12.039 ↗
24. Nonequilibrium scale selection mechanism for columnar jointing10.1073/pnas.0805132106 ↗
25. Evolving fracture patterns: columnar joints, mud cracks and polygonal terrain10.1098/rsta.2012.0353 ↗
26. Evolution of mud-crack patterns during repeated drying cycles10.1039/b922206e ↗
27. Numerical study of drying process and columnar fracture process in granules-water mixtures
28. Development and geometry of isotropic and directional shrinkage crack patterns10.1103/PhysRevE.61.6950 ↗
29. Avoiding “mud” cracks during drying of thin films from aqueous colloidal suspensions10.1016/j.jcis.2007.03.076 ↗
30. The origin and occurrence of subaqueous sedimentary cracks10.1144/SP448.15 ↗
31. Cracking mud, freezing dirt, and breaking rocks10.1063/PT.3.2584 ↗
32. VI. The phenomena of rupture and flow in solids
33. Characterization of membrane degradation growth in fuel cells using X-ray computed tomography10.1149/2.0251806jes ↗
34. 3D visualization of membrane failures in fuel cells10.1016/j.jpowsour.2017.01.129 ↗
35. 3D printed flow field and fixture for visualization of water distribution in fuel cells by X-ray computed tomography10.1149/2.0461613jes ↗
36. Gravure coating for roll-to-roll manufacturing of proton-exchange-membrane fuel cell catalyst layer10.1149/2.0091813jes ↗
37. Development of high-performance roll-to-roll-coated gas-diffusion-electrode-based fuel cells10.1016/j.jpowsour.2021.230039 ↗
38. Slot-die-coating operability windows for polymer electrolyte membrane fuel cell cathode catalyst layers10.1016/j.jcis.2021.11.047 ↗
39. Baumann · 2012
40. Homogeneity analysis of square meter-sized electrodes for PEM electrolysis and PEM fuel cells10.1007/s11998-018-0074-3 ↗
41. Effect of catalyst ink and formation process on the multiscale structure of catalyst layers in PEM fuel cells10.3390/app12083776 ↗
42. Effect of rheological properties of catalyst slurry on the structure of catalyst layer in PEMFC10.1016/j.ijhydene.2021.12.227 ↗
43. Controlling cracking formation in fuel cell catalyst layers10.1016/j.jpowsour.2019.02.058 ↗
44. Analysis of crack formation during fuel cell catalyst ink drying process. Reduction of catalyst layer cracking by addition of high boiling point solvent10.1016/j.colsurfa.2021.127153 ↗
45. Layer Formation from polymer carbon-black dispersions10.3390/coatings8120450 ↗
46. Effect of dispersion method and catalyst on the crack morphology and performance of catalyst layer of PEMFC10.1149/1945-7111/ac3598 ↗
47. Pfeilsticker · 2023
48. Impact of catalyst ink dispersing solvent on PEM fuel cell performance and durability10.1149/1945-7111/abf2b0 ↗
49. Highly durable fluorinated high oxygen permeability ionomers for proton exchange membrane fuel cells10.1002/aenm.202201063 ↗
50. Impact of platinum loading and layer thickness on cathode catalyst degradation in PEM fuel cells10.1149/1945-7111/acb8df ↗
51. Quantifying key parameters to provide better understating of microstructural changes in polymer electrolyte membrane fuel cells during degradation: a startup/shutdown case study10.1016/j.jpowsour.2023.232807 ↗
52. Effect of carbon support characteristics on fuel cell durability in accelerated stress testing
53. Improved carbon corrosion and platinum dissolution durability in automotive fuel cell startup and shutdown operation
54. Elucidating the dynamic nature of fuel cell electrodes as a function of conditioning: an ex situ material characterization and in situ electrochemical diagnostic study10.1021/acsami.9b11365 ↗
55. Dictating Pt-based electrocatalyst performance in polymer electrolyte fuel cells, from formulation to application10.1021/acsami.9b17614 ↗
56. Effective electrode edge protection for proton exchange membrane fuel cell drive cycle operation10.1149/09208.0351ecst ↗
57. New insights on the agglomeration and sedimentation behaviours of catalyst ink of proton exchange membrane fuel cells affected by ionomers concentration10.1016/j.jpowsour.2022.232427 ↗
58. Effects of ionomer and dispersion methods on rheological behavior of proton exchange membrane fuel cell catalyst layer ink10.1016/j.ijhydene.2020.07.241 ↗
59. 3D imaging of catalyst support corrosion in polymer electrolyte fuel cells10.1021/jp203016u ↗
60. Rheological investigation on the microstructure of fuel cell catalyst inks10.1021/acsami.8b15039 ↗
61. Conway · 1999
62. Influence of the distribution of the shape and size distribution of pigment particles on cracking in coating layers during creasing10.3183/npprj-2012-27-04-p714-720 ↗
63. Rheology of aqueous carbon black dispersions10.1016/j.jcis.2003.12.004 ↗
64. Pfeilsticker