Tuning the Mn2+/Mn3+ ratio of ZnMn2O4 from spent zinc-carbon battery powder to enhance the electrochemical performance
Source abstract
Abstract
Recycling metal resources from spent battery powder to prepare electrode materials is an eco-friendly and sustainable strategy. However, direct utilization of spent battery powder is mostly ignored, and the prepared electrode materials by this approach exhibit limited electrochemical performance. Herein, we employ unpurified spent zinc-carbon battery powder (SP) and carbon nanotubes (CNTs) as raw materials to fabricate SP/CNTs via the ball milling method, and then use a novel electrochemical activation strategy to obtain oxygen vacancy-rich SP@CNTs (Ov-SP@CNTs) materials. Under the combined action of CNTs doping and oxygen vacancies caused by the tuning of Mn 2+/Mn 3+ ratio via the electrochemical activation strategy, the optimum electrode (Ov-SP@CNTs-10) for supercapacitor shows the specific capacitance of 443.9 F g −1 at 1 A g −1 , which is nearly six and three times higher than that of SP and SP/CNTs electrodes, respectively. Additionally, the packaged asymmetric supercapacitor (ASC) device with Ov-SP@CNTs-10 as the cathode and commercial active carbon (AC) as the anode manifests a large energy density of 25.51 Wh·kg −1 at the power density of 399.98 W kg −1, and the capacity retention of 88.58% after 10,000 cycles at 4 A g −1. This work opens up a new way for the direct utilization of SP to prepare high-performance supercapacitor electrode materials.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. From spent Zn-MnO2 primary batteries to rechargeable Zn-MnO2 batteries: a novel directly recycling route with high battery performance10.1016/j.jenvman.2021.113473 ↗
2. Degradation of bisphenol A by activating peroxymonosulfate with Mn0.6Zn0.4Fe2O4 fabricated from spent Zn-Mn alkaline batteries10.1016/j.cej.2019.01.189 ↗
3. Recycling waste batteries: recovery of valuable resources or reutilization as functional materials10.1021/acssuschemeng.8b03495 ↗
4. A facile electrospinning and electrospraying synchronization technique for preparation of high performance MnO/C@rGO composite anodes for lithium storage10.1039/C7RA09636D ↗
5. A solvent-exchange strategy to develop stiff and tough hydrogel electrolytes for flexible and stable supercapacitor10.1016/j.jpowsour.2022.231326 ↗
6. Efficient interface engineering on the NiO/FeCo2O4 electrode for boosting photo-assisted supercapacitor performance10.1016/j.jpowsour.2022.231741 ↗
7. Recent advances and future perspectives for aqueous zinc-ion capacitors10.1088/2752-5724/ac4263 ↗
8. High area energy density of all-solid-state supercapacitor based on double-network hydrogel with high content of graphene/PANI fiber10.1016/j.cej.2021.133045 ↗
9. Insights on the electron transfer pathway of phenolic pollutant degradation by endogenous N-doped carbonaceous materials and peroxymonosulfate system10.1016/j.jhazmat.2021.127568 ↗
10. Construction of hierarchical NiCoSe@CoS core-shell nanotube arrays for high-performance hybrid supercapacitor10.1016/j.jallcom.2022.165824 ↗
11. Highly-active CoMn2O4 nanowires decorated with multilayer Ni(OH)2 nanosheets as bind-free electrodes for high-performance energy storage application10.1016/j.jallcom.2022.164551 ↗
12. MXene chemistry, electrochemistry and energy storage applications10.1038/s41570-022-00384-8 ↗
13. 3D printing nanostructured solid polymer electrolytes with high modulus and conductivity10.1002/adma.202204816 ↗
14. L. Manjakkal, A. Pullanchiyodan, N. Yogeswaran, E.S. Hosseini, R. Dahiya, A wearable supercapacitor based on conductive PEDOT:PSS-coated cloth and a sweat electrolyte, Adv. Mater. 32 (24) 2020 1907254, https://doi.org/10.1002/adma.201907254.10.1002/adma.201907254 ↗
15. MnO2/carbon nanotube free-standing electrode recycled from spent manganese-oxygen battery as high-performance supercapacitor material10.1007/s10853-022-07223-7 ↗
16. NaTi2(PO4)3/C‖carbon package asymmetric flexible supercapacitors with the positive material recycled from spent Zn‒Mn dry batteries10.1016/j.jallcom.2018.12.163 ↗
17. Facile Preparation of MnO2/graphene nanocomposites with spent battery powder for electrochemical energy storage10.1021/acssuschemeng.5b00305 ↗
18. Electrochemical performance studies of MnO2 nanoflowers recovered from spent battery10.1016/j.materresbull.2014.08.008 ↗
19. Direct electro-synthesis of MnO2 nanoparticles over nickel foam from spent alkaline battery cathode and its supercapacitor performance10.1016/j.jtice.2019.01.019 ↗
20. Effect of temperature on the electrochemical synthesis of MnO2 recycled from spent Zn-MnO2 alkaline batteries and application of recycled MnO2 as electrochemical pseudocapacitors10.1016/j.matchemphys.2017.04.051 ↗
21. Sol-gel synthesis of manganese oxide supercapacitor from manganese recycled from spent Zn-MnO2 batteries using organic acid as a leaching agent10.1007/s11581-019-02995-6 ↗
22. Manganese oxide synthesized from spent Zn-C battery for supercapacitor electrode application10.1038/s41598-019-44778-z ↗
23. Turning carbon-ZnMn2O4 powder in primary battery waste to be an effective active material for long cycling life supercapacitors: in situ gas analysis10.1016/j.wasman.2020.05.007 ↗
24. MnO2 nanosheets decorated porous active carbon derived from wheat bran for high-performance asymmetric supercapacitor10.1016/j.jelechem.2019.113412 ↗
25. Green synthesis of three-dimensional MnO2/graphene hydrogel composites as a high-performance electrode material for supercapacitors10.1021/acsami.8b02354 ↗
26. Outstanding supercapacitor performance with intertwined flower-like NiO/MnO2/CNT electrodes10.1016/j.materresbull.2022.111745 ↗
27. S-doped graphene/mixed-valent manganese oxides composite electrode with superior performance for supercapacitors10.1016/j.jallcom.2019.152970 ↗
28. Electronic structure control of tungsten oxide activated by Ni for ultrahigh-performance supercapacitors10.1002/smll.201800381 ↗
29. Tuning electronic structure of δ-MnO2 by the alkali-ion (K, Na, Li) associated manganese vacancies for high-rate supercapacitors10.1016/j.jechem.2020.08.004 ↗
30. Over-reduction-controlled mixed-valent manganese oxide with tunable Mn2+/Mn3+ ratio for high-performance asymmetric supercapacitor with enhanced cycling stability10.1021/acs.langmuir.0c03580 ↗
31. N-doped and oxygen vacancy-rich NiCo2O4 nanograss for supercapacitor electrode10.1016/j.cej.2021.132242 ↗
32. High-performance multi-dimensional nitrogen-doped N+MnO2@TiC/C electrodes for supercapacitors10.1016/j.electacta.2021.137716 ↗
33. Identification of MnOx species and Mn valence states in MnOx/TiO2 catalysts for low temperature10.1016/j.cej.2015.02.072 ↗
34. Polyaniline/multi-walled carbon nanotubes filled biopolymer based flexible substrate electrodes for supercapacitor applications10.1016/j.est.2021.102256 ↗
35. High performance supercapacitor based on camphor sulfonic acid doped polyaniline/multiwall carbon nanotubes nanocomposite10.1016/j.electacta.2020.136229 ↗
36. Durable and efficient hollow porous oxide spinel microspheres for oxygen reduction10.1016/j.joule.2017.11.016 ↗
37. One-step green route synthesis of spinel ZnMn2O4 nanoparticles decorated on MWCNTs as a novel electrode material for supercapacitor10.1016/j.mseb.2019.114481 ↗
38. Evolution of spent LiFePO4 powders into LiFePO4/C/FeS composites: a facile and smart approach to make sustainable anodes for alkaline Ni-Fe secondary batteries10.1016/j.jpowsour.2018.09.062 ↗
39. Perspectives on carbon nanotubes and graphene Raman spectroscopy10.1021/nl904286r ↗
40. Graphene-wrapped hollow ZnMn2O4 microspheres for high-performance cathode materials of aqueous zinc ion batteries10.1016/j.electacta.2019.05.147 ↗
41. A facile and high effective oxygen defect engineering for improving electrochemical performance of lithium-rich manganese-based cathode materials10.1016/j.jpowsour.2022.231456 ↗
42. A manganese phosphate cathode for long-life aqueous energy storage10.1002/adfm.202100477 ↗
43. Defect engineering of oxygen-deficient manganese oxide to achieve high-performing aqueous zinc ion battery10.1002/aenm.201803815 ↗
44. Adjusting the coordination environment of Mn enhances supercapacitor performance of MnO210.1002/aenm.202101412 ↗
45. Synthetization and electrochemical performance of pomegranate-like ZnMn2O4 porous microspheres10.1016/j.jallcom.2020.154084 ↗
46. Scalable and facile synthesis of V2O5 nanoparticles via ball milling for improved aerobic oxidative desulfurization10.1016/j.gee.2020.10.005 ↗
47. Promoting the cyclic and rate performance of nickel hydroxide with ZnO via electrodeposition for supercapacitor10.1016/j.jallcom.2022.164865 ↗
48. Recycling of spent alkaline Zn-Mn batteries directly: combination with TiO2 to construct a novel Z-scheme photocatalytic system10.1016/j.jhazmat.2020.123236 ↗
49. Ultrathin iron-cobalt oxide nanosheets with abundant oxygen vacancies for the oxygen evolution reaction10.1002/adma.201606793 ↗
50. Oxygen vacancies modulation Mn3O4 nanozyme with enhanced oxidase-mimicking performance for L-cysteine detection10.1016/j.snb.2021.129560 ↗
51. Defect engineering induced heterostructure of Zn-birnessite@spinel ZnMn2O4 nanocrystal for flexible asymmetric supercapacitor10.1016/j.cej.2021.133115 ↗
52. Synthetization and electrochemical performance of pomegranate-like ZnMn2O4 porous microspheres10.1016/j.jallcom.2020.154084 ↗
53. Cobalt-doped zinc manganese oxide porous nanocubes with controlled morphology as positive electrode for hybrid supercapacitors10.1016/j.cej.2018.12.152 ↗
54. Determining the role of oxygen vacancies in the photoelectrocatalytic performance of WO3 for water oxidation10.1039/C9SC06325K ↗
55. Films of WO3 plate-like arrays with oxygen vacancies proportionally controlled via rapid chemical reduction10.1016/j.ijhydene.2017.11.094 ↗
56. NiCo2O4 with oxygen vacancies as better performance electrode material for supercapacitor10.1016/j.cej.2017.10.128 ↗
57. Self-stacked multilayer FeOCl supported on a cellulose-derived carbon aerogel: a new and high-performance anode material for supercapacitors10.1039/C8TA12261J ↗
58. Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance10.1038/ncomms12122 ↗
59. One-step microwave synthesis of NiO/NiS@CNT nanocomposites for high-cycling-stability supercapacitors10.1016/j.jallcom.2019.07.213 ↗
60. MnO2-carbon nanotube composite for high-areal-density supercapacitors with high rate performance10.1016/j.jpowsour.2015.11.064 ↗
61. All-solid-state asymmetric supercapacitors based on ZnO quantum dots/carbon/CNT and porous N-doped carbon/CNT electrodes derived from a single ZIF-8/CNT template10.1039/C6TA03633C ↗
62. Rationally designed hierarchical ZnCo2O4/C core-shell nanowire arrays for high performance and stable supercapacitors10.1016/j.jallcom.2021.160037 ↗
63. High performance flexible asymmetric CNO-ZnO//ZnO supercapacitor with an operating voltage of 1.8 V in aqueous medium10.1016/j.apmt.2017.03.006 ↗
64. Co2+ induced phase transformation from δ- to α-MnO2 and their hierarchical α-MnO2@δ-MnO2 nanostructures for efficient asymmetric supercapacitors10.1039/C9TA01918A ↗
65. Morphology-controlled MnO2 modified silicon diatoms for high-performance asymmetric supercapacitors10.1039/C6TA11210B ↗