Reduction of oxygen transport resistance in PEFC cathode through blending a high oxygen permeable polymer
Source abstract
Abstract
Polymer electrolyte fuel cells (PEFCs) have been commercialized as fuel cell vehicles, but high oxygen transport resistance (OTR) needs to be improved for the operation at high current density. OTR is deeply related to oxygen transport to the Pt catalyst through the proton conduction ionomer. In this study, reduction of OTR has simply demonstrated by mixing a high oxygen permeable polymer, poly[1-phenyl-2[p(trimethylsilyl)phenyl]acetylene] (PTMSDPA), and a commercial Nafion® ionomer. Although the resulting blend ionomers have lower proton conductivity than Nafion® itself, they have contributed to increase in PEFC performance in the higher current density region. With small addition of PTMSDPA like 2.5%, local OTR around the Pt catalyst (R Pt), is found to decrease as the amount of PTMSDA increases owing to high oxygen permeability of PTMSDPA. However, OTR inside the pore of the catalyst layer (R pore) rather keeps increasing because of a hydrophilic character of PTMSDPA, leading to oxygen blockage by trapped water. Therefore, only the small amount of addition like 2.5% of PTMSDPA results in the best, and R pore and R pt are significantly lowered compared those of Nafion® ionomer by 29% and 43%, respectively, suggesting that utilizing high oxygen permeable polymer is effective for reducing OTR in PEFC.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Larminie · 2003
2. Fuel cell systems for transportation: status and trends10.1016/j.jpowsour.2007.10.026 ↗
3. Toyota MIRAI fuel cell vehicle and progress toward a future hydrogen society10.1149/2.F03152if ↗
4. Current status of automotive fuel cells for sustainable transport10.1016/j.coelec.2019.04.021 ↗
5. New roads and challenges for fuel cells in heavy-duty transportation10.1038/s41560-021-00775-z ↗
6. Integration of a high oxygen permeability ionomer into polymer electrolyte membrane fuel cell cathodes for high efficiency and power density10.1016/j.jpowsour.2021.230821 ↗
7. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells10.1021/acs.jpclett.6b00216 ↗
8. Impact of platinum loading and catalyst layer structure on PEMFC performance10.1149/2.072308jes ↗
9. The impact of platinum loading on oxygen transport resistance10.1149/2.061212jes ↗
10. Dependence of optimum Nafion content in catalyst layer on platinum loading10.1016/j.jpowsour.2003.12.060 ↗
11. Enhancement of service life of polymer electrolyte fuel cells through application of nanodispersed ionomer10.1126/sciadv.aaw0870 ↗
12. Challenges in applying highly active Pt-based nanostructured catalysts for oxygen reduction reactions to fuel cell vehicles10.1038/s41565-020-00824-w ↗
13. Current status and future development of catalyst materials and catalyst layers for proton exchange membrane fuel cells: an industrial perspective10.1021/acsenergylett.6b00644 ↗
14. Nanostructured Pt-alloy electrocatalysts for PEM fuel cell oxygen reduction reaction10.1039/b912552c ↗
15. Engineering catalyst layers for next-generation polymer electrolyte fuel cells: a review of design, materials, and methods10.1002/aenm.202101025 ↗
16. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells10.1021/acs.jpclett.6b00216 ↗
17. Analysis of reactant gas transport in catalyst layers; effect of Pt-loadings10.1149/1.3210674 ↗
18. Analysis of oxygen dissolution rate from gas phase into nafion surface and development of an agglomerate model10.1149/1.3484642 ↗
19. The analysis of performance loss with low platinum loaded cathode catalyst layers10.1149/1.3496614 ↗
20. Highly permeable perfluorinated sulfonic acid ionomers for improved electrochemical devices: insights into structure-property relationships10.1021/jacs.9b09170 ↗
21. (Invited) Development of PFSA ionomers for the membrane and the electrodes10.1149/06403.0371ecst ↗
22. Analysis of oxygen-transport diffusion resistance in proton-exchange-membrane fuel cells10.1149/1.3546038 ↗
23. Influence of equivalent weight of ionomer on local oxygen transport resistance in cathode catalyst layers10.1149/2.040308jes ↗
24. Correlating cathode microstructure with PEFC performance using FIB-SEM and TEM10.1149/2.0581709jes ↗
25. The impact of short side chain ionomer on polymer electrolyte membrane fuel cell performance and durability10.1016/j.apenergy.2018.02.154 ↗
26. Effects of short-side-chain perfluorosulfonic acid ionomers as binders on the performance of low Pt loading fuel cell cathodes10.1016/j.jpowsour.2014.10.149 ↗
27. Ink solvent dependence of the ionomer distribution in the catalyst layer of a PEMFC10.1149/2.1251814jes ↗
28. Effects of both oxygen permeability and ion exchange capacity for cathode ionomers on the performance and durability of polymer electrolyte fuel cells10.1149/2.0071806jes ↗
29. The role of oxygen-permeable ionomer for polymer electrolyte fuel cells
30. Polymerization of silicon-containing diphenylacetylenes and high gas permeability of the product Polymers110.1021/ma00047a038 ↗
31. Synthesis and properties of F-containing poly(diphenylacetylene) membranes10.1021/ma051445g ↗
32. Molecular simulation and experimental study of substituted polyacetylenes: fractional free volume, cavity size distributions and diffusion coefficients10.1021/jp060234q ↗
33. Synthesis and properties of indan-based polyacetylenes that feature the highest gas permeability among all the existing polymers10.1021/ma801845g ↗
34. Suppression of radical attack in polymer electrolyte membranes using a vinyl polymer blend interlayer with low oxygen permeability10.1016/j.memsci.2022.120734 ↗
35. Measurement of oxygen gas transport resistance in cathode catalyst layers of PEFC10.1149/06123.0039ecst ↗
36. Analysis of reactant gas transport in a catalyst layer10.1149/1.2780966 ↗
37. About the interactions controlling nafion's viscoelastic properties and morphology10.1021/acs.macromol.5b01559 ↗
38. A review of polymer-nanocomposite electrolyte membranes for fuel cell application10.1016/j.jiec.2014.04.030 ↗
39. Proton conductivity of nafion 117 as measured by a four‐electrode AC impedance method10.1149/1.1836625 ↗
40. Modeling of conductive transport in proton-exchange membranes for fuel cells10.1149/1.1393890 ↗
41. Wettability of polyacetylene: surface energetics and determination of material properties10.1021/la00070a021 ↗
42. PEFC catalyst layers: effect of support microstructure on both distributions of Pt and ionomer and cell performance and durability10.1016/j.coelec.2020.02.019 ↗
43. A review of water flooding issues in the proton exchange membrane fuel cell10.1016/j.jpowsour.2007.12.068 ↗
44. Investigation of reducing concentration overvoltage toward development of low Pt-loading PEFC10.1149/1945-7111/abac28 ↗
45. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells10.1021/acs.jpclett.6b00216 ↗
46. Experimental analysis of oxygen transport resistance for different types of ionomer in PEFC catalyst10.1149/08613.0141ecst ↗