Facile synthesis of three-dimensional conducting scaffold with magnesiophilic decorations toward non-dendritic Mg-metal batteries
Source abstract
Abstract
Despite the substantial efforts aimed at suppressing metallic dendrite growth in Li-metal batteries, Mg-metal dendrite growth has thus far received relatively little attention, and the formation of Mg dendrites has recently been shown to be a critical limitation for the practical advancement of rechargeable Mg-ion batteries. The development of an appropriate anode to efficiently accommodate Mg deposits is thus key to overcome this limitation. Here, we report the unique design of Ag-decorated Cu foam (ACF) consisting of a porous Cu scaffold decorated with magnesiophilic Ag nanoparticles (NPs) on its surface through a facile one-step synthesis process. For the first time, we demonstrate the strong affinity of Ag atoms to the electrochemically deposited Mg; magnesiophilicity is then adopted to design an efficient anode host for Mg-metal batteries and suppress the Mg dendritic formation. As a result, the ACF exhibits a greatly decreased nucleation overpotential with a longer cycle life compared with those of conventional substrates. In the absence of magnesiophilic Ag nano-seeds, non-uniform and top-oriented Mg depositions are observed; in contrast, the ACF helps contribute to an even deposition of the electrochemically formed Mg over the entire active surface, resulting in improved electrochemical performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Challenges in the development of advanced Li-ion batteries: a review10.1039/c1ee01598b ↗
2. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
3. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
4. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
5. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
6. Li–O2 and Li–S batteries with high energy storage10.1038/nmat3191 ↗
7. Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries10.1039/c2ee21892e ↗
8. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
9. A cost and resource analysis of sodium-ion batteries10.1038/natrevmats.2018.13 ↗
10. Odyssey of multivalent cathode materials: open questions and future challenges10.1021/acs.chemrev.6b00614 ↗
11. An overview on anodes for magnesium batteries: challenges towards a promising storage solution for renewables10.3390/nano11030810 ↗
12. Recent progress and challenges in the optimization of electrode materials for rechargeable magnesium batteries10.1002/smll.202004108 ↗
13. Electrolyte roadblocks to a magnesium rechargeable battery10.1039/c2ee03029b ↗
14. Mg rechargeable batteries: an on-going challenge10.1039/c3ee40871j ↗
15. Quest for nonaqueous multivalent secondary batteries: magnesium and beyond10.1021/cr500049y ↗
16. High energy density rechargeable magnesium battery using earth-abundant and non-toxic elements10.1038/srep05622 ↗
17. The challenge of developing rechargeable magnesium batteries10.1557/mrs.2014.61 ↗
18. Principles and prospects of high-energy magnesium-ion batteries10.3184/003685015X14388749247375 ↗
19. Cathode materials for magnesium and magnesium-ion based batteries10.1016/j.ccr.2014.11.005 ↗
20. Microscopic properties of lithium, sodium, and magnesium battery anode materials related to possible dendrite growth10.1063/1.4901055 ↗
21. Self-diffusion barriers: possible descriptors for dendrite growth in batteries?10.1039/C8EE01448E ↗
22. Morphology evolution and dendrite growth in Li-and Mg-metal batteries: a potential dependent thermodynamic and kinetic multiscale ab initio study10.1016/j.electacta.2020.136493 ↗
23. Formation of magnesium dendrites during electrodeposition10.1021/acsenergylett.8b02470 ↗
24. Dendrite growth in Mg metal cells containing Mg(TFSI)2/glyme electrolytes10.1149/2.1471809jes ↗
25. Mapping mechanisms and growth regimes of magnesium electrodeposition at high current densities10.1039/C9MH01367A ↗
26. Operando visualization of morphological evolution in Mg metal anode: insight into dendrite suppression for stable Mg metal batteries10.1021/acsenergylett.1c02486 ↗
27. Solvation sheath reorganization enables divalent metal batteries with fast interfaicial charge transfer kinetics10.1126/science.abg3954 ↗
28. High-performance Mg-organic batteries based on hybird MgCl2-LiCl/THF electrolytes10.1016/j.ensm.2022.01.022 ↗
29. Rechargeable magnesium batteries enabled by conventional electrolytes with multifunctional organic chloride additives10.1016/j.ensm.2021.11.011 ↗
30. Highly reversible Mg metal anodes enabled by interfacial liquid metal engineering for high-energy Mg-S batteries10.1016/j.ensm.2022.03.046 ↗
31. Reversible Mg metal anode in converntioanl electrolyte enables by durable heterogeneous SEI with low surface diffusion barrier10.1016/j.ensm.2021.12.023 ↗
32. Gold-incorporated porous hollow carbon nanofiber for reversible magnesium-metal batteries10.1016/j.cej.2021.133968 ↗
33. Molten salt synthesis (MSS) of Cu2Mo6S8—new way for large-scale production of Chevrel phases10.1016/j.jssc.2006.02.032 ↗
34. Metallurgical approach to enhance the electrochemical activity of magnesium anodes for magnesium rechargeable batteries10.1039/D0CC05373B ↗
35. Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth10.1038/nenergy.2016.10 ↗
36. Kinetic and thermodynamic studies of Mg2+ and Li+ ion insertion into the Mo6S8 Chevrel phase10.1149/1.1758811 ↗