A mathematical model describing the surface evolution of Mg anode during discharge of aqueous Mg-air battery
Source abstract
Abstract
A numerical model is developed, aiming to understand and describe anode dissolution behavior and respective interface effects at an Mg-0.1Ca anode during discharge within an aqueous magnesium-air battery (MAB). In this model, the negative difference effect (NDE) that impairs the performance (e.g. utilization efficiency and capacity) of the anode is considered by adding a linear semi-empirical equation to calculate the total dissolution current density responsible for the dissolution of the Mg-0.1Ca anode. The proposed model is capable of predicting the effect of Mg(OH) 2 deposit on the discharge process by consideration of surface coverage, layer thickness, and deposit porosity. In addition, the model can track the pH changes within electrolyte nearby the anode surface during discharge processes. The simulation results representing the development of local pH and the thickness of the deposited layer are validated by corresponding experimental measurements and are in good agreement with the experimental findings.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced battery technologies research · Magnesium Alloys: Properties and Applications · Layered Double Hydroxides Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Critical review of energy storage systems10.1016/j.energy.2020.118987 ↗
2. Recovery processes of sustainable energy using different biomass and wastes10.1016/j.rser.2021.111483 ↗
3. Assessment of solar and wind resource synergy in Australia10.1016/j.apenergy.2016.12.135 ↗
4. Are travel surveys a good basis for EV models? Validation of simulated charging profiles against empirical data10.1016/j.apenergy.2020.115318 ↗
5. Optimal PV-EV sizing at solar powered workplace charging stations with smart charging schemes considering self-consumption and self-sufficiency balance
6. Review on Li–air batteries—opportunities, limitations and perspective10.1016/j.jpowsour.2010.09.031 ↗
7. Recent advances in zinc-air batteries10.1039/C4CS00015C ↗
8. Magnesium–air batteries: from principle to application10.1039/C3MH00059A ↗
9. Developments in electrode materials and electrolytes for aluminium–air batteries10.1016/j.jpowsour.2013.01.141 ↗
10. High performance cathode based on carbon fiber felt for magnesium-air fuel cells10.1016/j.ijhydene.2013.02.093 ↗
11. A comprehensive review on recent progress in aluminum–air batteries10.1016/j.gee.2017.06.006 ↗
12. Deng · 2020
13. Jayasayee · 2021 · 47
14. Corrosion mechanism and hydrogen evolution on Mg10.1016/j.cossms.2014.09.005 ↗
15. Aqueous electrochemistry of the magnesium surface: thermodynamic and kinetic profiles10.1016/j.corsci.2018.10.014 ↗
16. The negative difference effect of magnesium and of the AZ91 alloy in chloride and stannate-containing solutions10.1016/j.corsci.2010.03.010 ↗
17. Mg anode corrosion in aqueous electrolytes and implications for Mg-air batteries10.1149/2.0781606jes ↗
18. Mg-Ca binary alloys as anodes for primary Mg-air batteries10.1016/j.jpowsour.2018.05.090 ↗
19. Fundamentals and advances in magnesium alloy corrosion10.1016/j.pmatsci.2017.04.011 ↗
20. Effects of microstructure on discharge behavior of AZ91 alloy as anode for Mg–air battery10.2320/matertrans.MC201403 ↗
21. Effects of microstructure evolution on discharge properties of AZ31 alloy as anode for seawater battery10.1002/maco.202011598 ↗
22. Effects of external field treatment on the electrochemical behaviors and discharge performance of AZ80 anodes for Mg-air batteries10.1016/j.jmst.2019.07.043 ↗
23. Performance of Mg–14Li–1Al–0.1Ce as anode for Mg-air battery10.1016/j.jpowsour.2010.07.097 ↗
24. Effect of Al and Pb contents on the corrosion electrochemical properties and activation of Mg-Al-Pb alloy anode10.1149/2.1211702jes ↗
25. Electrochemical performance of Mg-3 Al modified with Ga, in and Sn as anodes for Mg-air battery10.1149/2.0371607jes ↗
26. Corrosion and discharge properties of Ca/Ge micro-alloyed Mg anodes for primary aqueous Mg batteries10.1016/j.corsci.2020.108958 ↗
27. Effect of phosphate and vanadate as electrolyte additives on the performance of Mg-air batteries10.1016/j.matchemphys.2018.07.037 ↗
28. Performance boost for primary magnesium cells using iron complexing agents as electrolyte additives10.1038/s41598-018-25789-8 ↗
29. Tailoring the Mg-air primary battery performance using strong complexing agents as electrolyte additives10.1016/j.jpowsour.2020.227880 ↗
30. Synergistic mixture of electrolyte additives: a route to a high-efficiency Mg–air battery10.1021/acs.jpclett.0c02174 ↗
31. Enhancement of discharge performance for aqueous Mg-air batteries in 2, 6-dihydroxybenzoate-containing electrolyte10.1016/j.cej.2021.132369 ↗
32. Indium chloride as an electrolyte additive for primary aqueous Mg batteries10.1016/j.electacta.2021.137916 ↗
33. Precipitation in aqueous lithium–oxygen batteries: a model-based analysis10.1039/c3ee24299d ↗
34. Advances in modeling and simulation of Li–air batteries10.1016/j.pecs.2017.06.001 ↗
35. A review of modeling and simulation techniques across the length scales for the solid oxide fuel cell10.1016/j.jpowsour.2011.10.010 ↗
36. Modeling and simulation of metal-air batteries
37. First‐principles study of magnesium peroxide nucleation for Mg‐air battery10.1002/asia.201801057 ↗
38. Simulation of electrochemical performance on electrode of Mg-Zn air cell10.4028/www.scientific.net/MSF.833.134 ↗
39. Uimonen · 2018 · 1
40. Theoretical limits to the anode potential in aqueous Mg–air batteries10.1021/acs.jpcc.5b05677 ↗
41. Model-based analysis of an integrated zinc-air flow battery/zinc electrolyzer system10.3389/fenrg.2019.00015 ↗
42. First principles investigation of zinc-anode dissolution in zinc-air batteries10.1039/c3cp50349f ↗
43. Microscopic properties of lithium, sodium, and magnesium battery anode materials related to possible dendrite growth10.1063/1.4901055 ↗
44. Communications: elementary oxygen electrode reactions in the aprotic Li-air battery10.1063/1.3298994 ↗
45. Designing aqueous organic electrolytes for zinc–air batteries: method, simulation, and validation10.1002/aenm.201903470 ↗
46. Understanding the discharge behavior of an ultra-high-purity Mg anode for Mg–air primary batteries10.1039/D1TA04320J ↗
47. Revealing the impact of second phase morphology on discharge properties of binary Mg-Ca anodes for primary Mg-air batteries10.1016/j.corsci.2019.03.050 ↗
48. Approaching “stainless magnesium” by Ca micro-alloying10.1039/D0MH01380C ↗
49. Ca/In micro alloying as a novel strategy to simultaneously enhance power and energy density of primary Mg-air batteries from anode aspect10.1016/j.jpowsour.2020.228528 ↗
50. Synergistic mixture of electrolyte additives: a route to a high-efficiency Mg-air battery10.1021/acs.jpclett.0c02174 ↗
51. High-energy and durable aqueous magnesium batteries: recent advances and perspectives10.1016/j.ensm.2021.09.008 ↗
52. The source of hydrogen evolved from a magnesium anode10.1016/j.elecom.2013.08.023 ↗
53. Evidence for enhanced catalytic activity of magnesium arising from anodic dissolution10.1016/j.electacta.2014.03.133 ↗
54. A novel approach to on-line measurement of gas evolution kinetics: application to the negative difference effect of Mg in chloride solution10.1016/j.electacta.2013.07.131 ↗
55. High rate oxygen reduction reaction during corrosion of ultra-high-purity magnesium
56. Magnesium alloys as anodes for neutral aqueous magnesium-air batteries10.1016/j.jma.2021.04.011 ↗
57. The role of long‐period stacking ordered phase on the discharge and electrochemical behaviors of magnesium anode Mg‐Zn‐Y for the primary Mg‐air battery10.1002/er.5595 ↗
58. Clarifying the decisive factors for utilization efficiency of Mg anodes for primary aqueous batteries10.1016/j.jpowsour.2019.227201 ↗
59. The difference effect and the chunk effect10.1149/1.2427579 ↗
60. Microstructural influence on corrosion behavior of MgZnGe alloy in NaCl solution10.1016/j.jallcom.2018.12.296 ↗
61. Parametric studies of the formation of calcareous deposits on cathodically protected steel in seawater10.1149/1.2220970 ↗
62. A mathematical model for modeling the formation of calcareous deposits on cathodically protected steel in seawater10.1016/j.electacta.2012.06.056 ↗
63. Galvanic corrosion of Ti6Al4V -AA2024 joints in aircraft environment: modelling and experimental validation10.1016/j.corsci.2019.04.036 ↗
64. Simulation of corrosion product deposit layer growth on bare magnesium galvanically coupled to aluminum10.1149/2.0071501jes ↗
65. Coupling physics in machine learning to investigate the solution behavior of binary Mg alloys
66. Effect of impurities on the enhanced catalytic activity for hydrogen evolution in high purity magnesium10.1016/j.electacta.2015.03.021 ↗
67. The corrosion of magnesium in aqueous solution containing chloride ions10.1016/0010-938X(77)90059-2 ↗
68. The role of the anion in the anodic dissolution of magnesium10.1149/1.2424019 ↗
69. Allen · 2001
70. Mg dissolution in phosphate and chloride electrolytes: insight into the mechanism of the negative difference effect10.5006/1459 ↗
71. Corrosion behaviour of die-cast AZ91D magnesium alloy in aqueous sulphate solutions10.1016/j.corsci.2009.09.020 ↗
72. Mathematical-modeling of the formation of calcareous deposits on cathodically protected steel in seawater10.1149/1.2056150 ↗
73. The anodic surface film and hydrogen evolution on Mg10.1016/j.corsci.2015.05.047 ↗
74. Utilization of chemical stability diagrams for improved understanding of electrochemical systems: evolution of solution chemistry towards equilibrium10.1038/s41529-017-0021-2 ↗