journal article·2022-07

A direct-methane solid oxide fuel cell with a functionally engineered Ni–Fe metal support

Qihao Li, Xin Wang, Chenzhao Liu, Xinwei Yang, Cheng Li, Lichao Jia, Jian Li

Publisher page

Abstract

Reduced Ce 0.9Ni 0.1O 2-δ consists of Ni nanoparticles and Ni-doped CeO 2 (CNO), named (Ni@CNO) with Ni nanoparticles uniformly distributed on CNO substrate with high oxygen vacancy concentration and good water absorption capability. Thus Ni@CNO demonstrates moderate catalytic activity and high carbon deposition resistance during CH 4 steam-reforming. When it is infiltrated into Ni 0.9Fe 0.1 (NF) metallic support for metal-supported solid oxide fuel cells (MS-SOFCs), forming a continuous coating, Ni@CNO offers CH 4 steam-reforming activity additional to that of the NF support with increased H 2/CH 4 ratio (3.38 at 600 °C) in the reforming gas, enhanced carbon deposition resistance, and prolonged performance durability. With the Ni@CNO-infiltrated NF support (NFNC), Ni/Ce 0.9Gd 0.1O 2-δ (Ni-GDC) function anode, GDC electrolyte, and La 0.6Sr 0.4Co 0.2Fe 0.8O 3-δ/Ce 0.9Gd 0.1O 2-δ (LSCF-GDC) cathode, the MS-SOFC cell directly fueled by wet CH 4 (3 vol% H 2 O) exhibits a peak power density of 0.343 W cm −2 and the cell voltage durably maintains above 0.6 V at 400 mA cm −2 during a test of 280 h at 600 °C without noticeable carbon deposition in the support and the functional anode. Such performance is comparable to and higher than those reported, suggesting that NFNC is a promising option for direct-CH 4 MS-SOFCs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Recent developments in metal-supported solid oxide fuel cells
2. Degradation mechanisms of metal-supported solid oxide cells and countermeasures: a review10.3390/ma14113139 ↗
3. High performance of ceramic current collector fabricated at 550 degrees C through in-situ joining of reduced Mn1.5Co1.5O4 for metal-supported solid oxide fuel cells10.1016/j.ijhydene.2020.06.237 ↗
4. Progress in low-temperature solid oxide fuel cells with hydrocarbon fuels10.1016/j.cej.2020.126235 ↗
5. Direct-methane solid oxide fuel cells with an in situ formed Ni-Fe alloy composite catalyst layer over Ni-YSZ anodes10.1016/j.renene.2019.12.126 ↗
6. Efficient and stable conversion of oxygen-bearing low-concentration coal mine methane by the electrochemical catalysis of SOFC anode: from pollutant to clean energy10.1016/j.apcatb.2019.118413 ↗
7. Porous Cu-Ni-YSZ cermets using CH4 fuel for SOFC10.1016/j.ijhydene.2020.05.281 ↗
8. Electrochemical performance of a solid oxide fuel cell with an anode based on Cu–Ni/CeO2 for methane direct oxidation10.1016/j.jpowsour.2013.05.159 ↗
9. Electrochemical performance and carbon deposition resistance of M-BaZr0.1Ce0.7Y0.1Yb0.1O3-δ (M= Pd, Cu, Ni or NiCu) anodes for solid oxide fuel cells10.1038/srep07667 ↗
10. Enhanced electrochemical performance of BaZr0.1Ce0.7Y0.1Yb0.1O3−δ electrodes for hydrogen and methane oxidation in solid oxide fuel cells by Pd or Cu0.5Pd0.5 impregnation10.1016/j.jpowsour.2011.10.082 ↗
11. Carbon tolerant Ni–Au SOFC electrodes operating under internal steam reforming conditions10.1016/j.jcat.2008.07.011 ↗
12. Perovskite materials for highly efficient catalytic CH4 fuel reforming in solid oxide fuel cell10.1016/j.ijhydene.2021.05.021 ↗
13. Catalytic properties of the perovskite oxide La0.75Sr0.25Cr0.5Fe0.5O3-δ in relation to its potential as a solid oxide fuel cell anode material10.1021/cm049341s ↗
14. Direct CH4 fuel cell using Sr2FeMoO6 as an anode material10.1016/j.jpowsour.2011.03.053 ↗
15. Molybdenum doped Pr0.5Ba0.5MnO3-δ (Mo-PBMO) double perovskite as a potential solid oxide fuel cell anode material10.1016/j.jpowsour.2015.09.127 ↗
16. Exploring Ni(Mn1/3Cr2/3)2O4 spinel-based electrodes for solid oxide cells10.1039/C9TA11878K ↗
17. High performance and carbon-deposition resistance metal-supported solid oxide fuel cell with a nickel-manganese spinel modified anode
18. Dry reforming of methane: influence of process parameters-A review10.1016/j.rser.2015.02.026 ↗
19. Ni/CeO2 catalysts with high CO2 methanation activity and high CH4 selectivity at low temperatures10.1016/j.ijhydene.2011.12.122 ↗
20. A direct CH4 metal-supported solid oxide fuel cell with an engineered Ni/Gd-doped CeO2 anode containing Ni and MnO nanoparticles
21. A cost-effective process for fabrication of metal-supported solid oxide fuel cells10.1016/j.ijhydene.2010.02.106 ↗
22. Porous nickel-iron alloys as anode support for intermediate temperature solid oxide fuel cells: II. Cell performance and stability10.1016/j.ijhydene.2018.09.142 ↗
23. Methane on-cell reforming in nickel-iron alloy supported solid oxide fuel cells10.1016/j.jpowsour.2015.03.062 ↗
24. EXPGUI, a graphical user interface for GSAS10.1107/S0021889801002242 ↗
25. Reduction property and catalytic activity of Ce1-xNixO2 mixed oxide catalysts for CH4 oxidation10.1016/S0926-860X(02)00659-2 ↗
26. A Ce(Mn,Fe)O2 dense nanofilm as an improved active anode for metal-supported solid oxide fuel cells10.1039/c3ra40257f ↗
27. MnOx-CeO2 mixed oxide catalysts for complete oxidation of formaldehyde: effect of preparation method and calcination temperature10.1016/j.apcatb.2005.08.004 ↗
28. Catalytic combustion of volatile organic compounds on gold/cerium oxide catalysts10.1016/S0926-3373(02)00127-3 ↗
29. Promotional mechanisms of activity and SO2 tolerance of Co- or Ni-doped MnOx-CeO2 catalysts for SCR of NOx with NH3 at low temperature10.1016/j.cej.2017.02.042 ↗
30. Nano-socketed nickel particles with enhanced coking resistance grown in situ by redox exsolution10.1038/ncomms9120 ↗
31. Synergistically enhanced hydrogen evolution electrocatalysis by in situ exsolution of metallic nanoparticles on perovskites10.1039/C8TA02347F ↗
32. Design of a surface alloy catalyst for steam reforming10.1126/science.279.5358.1913 ↗
33. State-of-the-art catalysts for CH4 steam reforming at low temperature10.1016/j.ijhydene.2013.12.001 ↗
34. Morphology dependence of catalytic properties of Ni/CeO2 nanostructures for carbon dioxide reforming of methane10.1021/jp300543r ↗
35. Nanostructured Pt- and Ni-based catalysts for CO2-reforming of methane10.1016/j.jcat.2009.12.010 ↗
36. High-performance direct carbon dioxide-methane solid oxide fuel cell with a structure-engineered double-layer anode10.1016/j.jpowsour.2020.229199 ↗
37. A highly active CH4 catalyst correlated with solid oxide fuel cell anode performance10.1039/D0TA10672K ↗
38. Infiltrated Ni0.08Co0.02CeO2–‍x@Ni0.8Co0.2 catalysts for a finger-like anode in direct methane-fueled solid oxide fuel cells10.1021/acsami.0c17339 ↗
39. Degradation of metal-supported cells with Ni-YSZ or Ni-Ni3Sn-YSZ anodes operated with methane-based fuels
40. Performance and properties of suspension plasma sprayed metal-supported Cu-Co-Ni-SDC SOFC anodes in methane10.1002/fuce.201800113 ↗