journal article·2022-02

Superior high-temperature rate performance of LiFePO4 cathode: The stabilizing effect of a multicomponent gel biopolymer binder

Ling Ding, Rita Leones, Toni Schmeida, Kornelius Nielsch, Daria Mikhailova

Publisher page

Abstract

A quasi-solid-state polymer gel binder (PGB) has been prepared and investigated for application in high-temperature lithium-ion batteries. The effects of binder on the aging behavior of LiFePO 4 (LFP) cathodes were investigated by electrochemical methods and post mortem analysis. Conventional binder polyvinylidene difluoride (PVDF) was used as a benchmark. At 60 °C, LFP/PGB half cells delivered a capacity of 98 mAh g −1 , which corresponds to 92% of the initial value 140 mA g −1 over 1000 cycles at 10C. These results were far superior to the ones obtained for LFP with PVDF which only exhibited a capacity of 58 mAh g −1. We showed that a significant degradation of LFP in the LFP/PVDF electrode accompanied by iron dissolution in the electrolyte and deposition on the anodic surface together with a strong swelling of PVDF in the electrolyte as well as some contact loss between the electrode and the current collector represent the main reasons for the capacity fading at 60 °C. In contrast, these effects were much less pronounced in the LFP/PGB electrode. Furthermore, thick LFP/PGB electrodes with 450 μm thickness, corresponding to a 4.5 mg cm −2 mass loading, showed a better cycling performance and more favorable electrochemical kinetics than the electrode incorporating PVDF.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. High mass loading additive-free LiFePO4 cathodes with 500 μm thickness for high areal capacity Li-ion batteries10.1016/j.jpowsour.2020.228033 ↗
2. Titanium niobium oxides (TiNb2O7): design, fabrication and application in energy storage devices
3. Development and challenges of LiFePO4 cathode material for lithium-ion batteries10.1039/C0EE00029A ↗
4. Cycling degradation of an automotive LiFePO4 lithium-ion battery10.1016/j.jpowsour.2010.08.070 ↗
5. Deterioration of lithium iron phosphate/graphite power batteries under high-rate discharge cycling10.1016/j.electacta.2015.06.096 ↗
6. A brief review on solid electrolyte interphase composition characterization technology for lithium metal batteries: challenges and perspectives10.1021/acs.jpcc.1c06277 ↗
7. High-temperature storage and cycling of C-LiFePO4/graphite Li-ion cells10.1016/j.elecom.2005.04.018 ↗
8. Aging of a commercial graphite/LiFePO4 cell10.1149/1.3614529 ↗
9. Fundamentals and challenges of lithium ion batteries at temperatures between -40 and 60 °C10.1002/aenm.201904152 ↗
10. Hyperbranched β-cyclodextrin polymer as an effective multidimensional binder for silicon anodes in lithium rechargeable batteries10.1021/nl404237j ↗
11. Chitosan, a new and environmental benign electrode binder for use with graphite anode in lithium-ion batteries10.1016/j.electacta.2013.05.009 ↗
12. Water-soluble binders for MCMB carbon anodes for lithium-ion batteries10.1016/j.jpowsour.2010.10.025 ↗
13. Influence of electrode preparation on the electrochemical performance of LiNi0.8Co0.15Al0.05O2 composite electrodes for lithium-ion batteries10.1016/j.jpowsour.2012.03.017 ↗
14. A comparative study of different binders and their effects on electrochemical properties of LiMn2O4 cathode in lithium ion batteries10.1016/j.jpowsour.2013.08.051 ↗
15. Binder effect on cycling performance of silicon/carbon composite anodes for lithium ion batteries10.1007/s10800-006-9191-2 ↗
16. Thermal stability studies of Li-ion cells and components10.1149/1.1392458 ↗
17. Permittivity, thermal conductivity and thermal stability of poly (vinylidene fluoride)/graphene nanocomposites10.1109/TDEI.2011.5739452 ↗
18. Application and modification of poly (vinylidene fluoride)(PVDF) membranes–a review10.1016/j.memsci.2014.03.055 ↗
19. Critical evaluation of thermal, optical and morphological properties of V, S and Dy doped-ZnO/PVDF/Functionalized-PMMA blended nanocomposites10.1007/s10904-018-0866-z ↗
20. Process induced electroactive β-polymorph in PVDF: effect on dielectric and ferroelectric properties10.1039/c4cp01004c ↗
21. Characterization of (PVDF+ LiFePO4) solid polymer electrolyte10.1007/s10800-007-9294-4 ↗
22. Just add tetrazole: 5-(2-Pyrrolo) tetrazoles are simple, highly potent anion recognition elements10.1039/c1cc15875a ↗
23. Cycle performance improvement of LiFePO4 cathode with polyacrylic acid as binder10.1016/j.electacta.2012.07.054 ↗
24. Study of poly (acrylonitrile-methyl methacrylate) as binder for graphite anode and LiMn2O4 cathode of Li-ion batteries10.1016/S0378-7753(02)00107-6 ↗
25. Co-crosslinked water-soluble biopolymers as a binder for high-voltage LiNi0.5Mn1.5O4|Graphite lithium-ion full cells10.1002/cssc.201903483 ↗
26. The effect of different binders on electrochemical properties of LiNi1/3Mn1/3Co1/3O2 cathode material in lithium ion batteries10.1016/j.jpowsour.2012.10.033 ↗
27. Water-soluble binder PAALi with terpene resin emulsion as tackifier for LiFePO4 cathode10.1002/app.46132 ↗
28. Enhanced high-temperature performances of LiFePO4 cathode with polyacrylic acid as binder10.1149/2.001206eel ↗
29. Enhanced electrochemical properties of LiFePO4 (LFP) cathode using the carboxymethyl cellulose lithium (CMC-Li) as novel binder in lithium-ion battery10.1016/j.carbpol.2014.05.027 ↗
30. Low cost, environmentally benign binders for lithium-ion batteries10.1149/1.3291976 ↗
31. Environment-friendly cathodes using biopolymer chitosan with enhanced electrochemical behavior for use in lithium ion batteries10.1021/am5084094 ↗
32. Carboxymethyl chitosan/conducting polymer as water-soluble composite binder for LiFePO4 cathode in lithium ion batteries10.1016/j.jpowsour.2016.10.041 ↗
33. Highly efficient multicomponent gel biopolymer binder enables ultrafast cycling and applicability in diverse battery formats10.1021/acsami.0c16635 ↗
34. Cycling degradation of an automotive LiFePO4 lithium-ion battery10.1016/j.jpowsour.2010.08.070 ↗
35. High-temperature storage and cycling of C-LiFePO4/graphite Li-ion cells, Electrochem
36. High loading and monodispersed Pt nanoparticles on multiwalled carbon nanotubes for high performance proton exchange membrane fuel cells10.1016/j.jpowsour.2007.11.036 ↗
37. Lithium-ion textile batteries with large areal mass loading10.1002/aenm.201100261 ↗
38. Nano-sized FeSe2 decorated rGO as a potential anode material with enhanced lithium-ion storage
39. A highly-efficient composite separator with strong ligand interaction for high-temperature lithium-ion batteries10.1002/celc.201800800 ↗
40. Electrospun PVdF-based fibrous polymer electrolytes for lithium ion polymer batteries10.1016/j.electacta.2004.07.014 ↗
41. Characterization of electrospun PVDF fiber-based polymer electrolytes10.1021/cm060223+ ↗
42. Microporous PVdF gel for lithium-ion batteries10.1016/S0378-7753(99)00154-8 ↗
43. Structure and performance of porous polymer electrolytes based on P (VDF-HFP) for lithium ion batteries10.1016/S0378-7753(01)00868-0 ↗
44. Highly conductive, lightweight, low-tortuosity carbon frameworks as ultrathick 3D current collectors10.1002/aenm.201700595 ↗
45. Cyanoethylated carboxymethyl chitosan as water soluble binder with enhanced adhesion capability and electrochemical performances for LiFePO4 cathode10.1016/j.electacta.2015.10.006 ↗
46. Flexible, high-wettability and fire‐resistant separators based on hydroxyapatite nanowires for advanced lithium‐ion batteries10.1002/adma.201703548 ↗
47. Impacts of different polymer binders on electrochemical properties of LiFePO4 cathode10.1016/j.apsusc.2013.05.149 ↗
48. 3D-Printed all-fiber Li-ion battery toward wearable energy storage10.1002/adfm.201703140 ↗
49. A trilayer separator with dual function for high performance lithium–sulfur batteries10.1016/j.jpowsour.2015.10.007 ↗
50. Study of LiFePO4 by cyclic voltammetry10.1149/1.2434687 ↗
51. Kinetic behavior of LiFePO4/C cathode material for lithium-ion batteries10.1016/j.electacta.2007.10.069 ↗
52. Helfferich · 2004
53. Cycle-life characterization of automotive lithium-ion batteries with LiNiO2 cathode10.1149/1.3126385 ↗
54. Enhanced high-temperature cycle performance of LiFePO4/carbon batteries by an ion-sieving metal coating on negative electrode10.1016/j.elecom.2008.09.022 ↗
55. Identify capacity fading mechanism in a commercial LiFePO4 cell10.1016/j.jpowsour.2009.05.036 ↗
56. Temperature dependent ageing mechanisms in Lithium-ion batteries–A Post-Mortem study10.1016/j.jpowsour.2014.03.112 ↗
57. A novel solid composite polymer electrolyte based on poly(ethylene oxide) segmented polysulfone copolymers for rechargeable lithium batteries10.1016/j.memsci.2012.09.038 ↗
58. Numerical simulation of the effect of the dissolution of LiMn2O4 particles on Li-ion battery performance10.1149/1.3516619 ↗
59. Study on polymer binders for high-capacity SiO negative electrode of Li-ion batteries10.1021/jp201691g ↗
60. Thermal runaway mechanism of lithium ion battery for electric vehicles: a review10.1016/j.ensm.2017.05.013 ↗
61. Ultrahigh-capacity and fire-resistant LiFePO4-based composite cathodes for advanced lithium-ion batteries10.1002/aenm.201802930 ↗
62. Water soluble binder, an electrochemical performance booster for electrode materials with high energy density10.1002/aenm.201701185 ↗
63. 1D building blocks-intermingled heteronanomats as a platform architecture for high-performance ultrahigh‐capacity lithium-ion battery cathodes10.1002/aenm.201501594 ↗
64. All-nanomat lithium-ion batteries: a new cell architecture platform for ultrahigh energy density and mechanical flexibility10.1002/aenm.201701099 ↗
65. Study of LiFePO4 by cyclic voltammetry10.1149/1.2434687 ↗
66. High-performance battery electrodes via magnetic templating10.1038/nenergy.2016.99 ↗
67. A comprehensive understanding of electrode thickness effects on the electrochemical performances of Li-ion battery cathodes10.1016/j.electacta.2012.03.161 ↗
68. Porous cathode optimization for lithium cells: ionic and electronic conductivity, capacity, and selection of materials10.1016/j.jpowsour.2009.11.044 ↗
69. Ultrahigh-capacity and fire-resistant LiFePO4-based composite cathodes for advanced lithium-ion batteries10.1002/aenm.201802930 ↗
70. Wood-inspired high-performance ultrathick bulk battery electrodes10.1002/adma.201706745 ↗
71. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗