Characteristics of interface between solid electrolyte and electrode in all-solid-state batteries prepared by spark plasma sintering
Source abstract
Abstract
Interface issues impede the development of all-solid-state lithium batteries (ASSLiBs). To resolve these issues, it is crucial to understand characteristics of electrode-electrolyte interface. Herein, all-solid-state symmetrical batteries and full batteries were prepared by spark plasma sintering (SPS) at 500 °C and 650 °C, using Li 1.5Al 0.5Ge 1.5(PO 4) 3 (LAGP) and LiFePO 4 (LFP) as solid electrolyte and electrode. The microstructures and electrochemical performances of the LFP/LAGP interface and LAGP/LFP interface (different sintering current directions) were investigated. The results showed that no interface layer was formed at the LFP/LAGP interface and LAGP/LFP interface at 500 °C; however, various interface layers were formed at 650 °C. At the 650-LFP/LAGP interface, an Al-poor layer and a Fe-rich Li-poor layer composed of Fe 2P 2O 7 were found, while at the 650-LAGP/LFP interface, an Al-rich Li-poor layer composed of AlPO 4 was found. The interfaces sintered at 500 °C had small impedance and were able to electrochemically cycle, while those sintered at 650 °C showed large impedance and were not able to electrochemically cycle. Furthermore, the 500-LAGP/LFP interface showed better cycle stability than the 500-LFP/LAGP interface. Thus, it is concluded that the sintering temperature and sintering current direction play important roles in the ASSLiBs preparation. The formation mechanism of the interface microstructures under the SPS was also discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Utmost limits of various solid electrolytes in all-solid-state lithium batteries: a critical review10.1016/j.rser.2019.04.035 ↗
2. Inorganic solid-state electrolytes for lithium batteries: mechanisms and properties governing ion conduction10.1021/acs.chemrev.5b00563 ↗
3. Recent progress of asymmetric solid-state electrolytes for lithium/sodium-metal batteries10.1016/j.enchem.2021.100058 ↗
4. Electrolyte/electrode interfaces in all-solid-state lithium batteries: a review10.1007/s41918-020-00092-1 ↗
5. Recent advances in the interface engineering of solid-state Li-ion batteries with artificial buffer layers: challenges, materials, construction, and characterization10.1039/C9EE00515C ↗
6. A review of challenges and issues concerning interfaces for all-solid-state batteries10.1016/j.ensm.2019.10.011 ↗
7. Monolithic all-phosphate solid-state lithium-ion battery with improved interfacial compatibility10.1021/acsami.8b05902 ↗
8. Interphase morphology between a solid-state electrolyte and lithium controls cell failure10.1021/acsenergylett.9b00093 ↗
9. Cu2ZnSnS4/graphene nanocomposites for ultrafast, long life all-solid-state lithium batteries using lithium metal anode10.1016/j.ensm.2016.02.004 ↗
10. High-performance all-solid-state lithium–sulfur batteries enabled by amorphous sulfur-coated reduced graphene oxide cathodes10.1002/aenm.201602923 ↗
11. Salt-based organic–inorganic nanocomposites: towards A stable lithium metal/Li10GeP2S12 solid electrolyte interface10.1002/anie.201807304 ↗
12. Constructing effective interfaces for Li1.5Al0.5Ge1.5(PO4)3 pellets to achieve roomerature hybrid solid-state lithium metal batteries10.1021/acsami.8b20413 ↗
13. Electrochemical nature of the cathode interface for a solid-state lithium-ion battery: interface between LiCoO2 and garnet-Li7La3Zr2O1210.1021/acs.chemmater.6b03870 ↗
14. Atomically intimate contact between solid electrolytes and electrodes for Li batteries10.1016/j.matt.2019.05.004 ↗
15. Excellent compatibility of solvate ionic liquids with sulfide solid electrolytes: toward favorable ionic contacts in bulk-type All-solid-state lithium-ion batteries10.1002/aenm.201500865 ↗
16. FeS2-Imbedded mixed conducting matrix as a solid battery cathode10.1002/aenm.201600495 ↗
17. Solution-processable glass LiI-Li4SnS4 superionic conductors for all-solid-state Li-ion batteries10.1002/adma.201505008 ↗
18. Sulfide solid electrolyte with favorable mechanical property for all-solid-state lithium battery10.1038/srep02261 ↗
19. A garnet structure-based all-solid-state Li battery without interface modification: resolving incompatibility issues on positive electrodes10.1039/C8SE00436F ↗
20. High-capacity Li-excess lithium nickel manganese oxide as a Co-free positive electrode material10.1016/j.materresbull.2020.111178 ↗
21. Structure, chemistry, and charge transfer resistance of the interface between Li7La3Zr2O12 electrolyte and LiCoO2 cathode10.1021/acs.chemmater.8b01713 ↗
22. High temperature electrode-electrolyte interface formation between LiMn1.5Ni0.5O4 and Li1.4Al0.4Ge1.6(PO4)310.1111/jace.15294 ↗
23. Effects of sintering temperature on interfacial structure and interfacial resistance for all-solid-state rechargeable lithium batteries10.1016/j.jpowsour.2016.06.068 ↗
24. Characterization of sputter-deposited LiCoO2 thin film grown on NASICON-type electrolyte for application in all-solid-state rechargeable lithium battery10.1021/acsami.6b15305 ↗
25. Compatibility study of oxide and olivine cathode materials with lithium aluminum titanium phosphate10.1007/s11581-017-2276-6 ↗
26. Study of Li4Ti5O12 interaction with solid lithium-containing electrolytes10.1134/S1070427216060100 ↗
27. Field-assisted sintering technology/spark plasma sintering: mechanisms, materials, and technology developments10.1002/adem.201300409 ↗
28. Recent development in reactive synthesis of nanostructured bulk materials by spark plasma sintering10.1016/j.ijrmhm.2013.01.017 ↗
29. Application of electric current-assisted sintering techniques for the processing of advanced materials10.1002/adem.202000051 ↗
30. Emerging applications of spark plasma sintering in all solid-state lithium-ion batteries and beyond10.1016/j.jpowsour.2018.04.054 ↗
31. Spark plasma sintered/synthesized dense and nanostructured materials for solid-state Li-ion batteries: overview and perspective10.1016/j.jpowsour.2013.09.010 ↗
32. A new approach to develop safe all-inorganic monolithic li-ion batteries10.1002/aenm.201000050 ↗
33. Delaizir · 2012 · 2140
34. Garnet related lithium ion conductor processed by spark plasma sintering for all solid state batteries10.1016/j.jpowsour.2013.10.089 ↗
35. An all-solid state NASICON sodium battery operating at 200°C10.1016/j.jpowsour.2013.09.051 ↗
36. Microstructure and ionic conductivity of Li1.5Al0.5Ge1.5(PO4)3 solid electrolyte prepared by spark plasma sintering10.1016/j.ceramint.2019.11.264 ↗
37. Origin of phase inhomogeneity in lithium iron phosphate during carbon coating10.1016/j.nanoen.2017.12.035 ↗
38. Effect of symbiotic compound Fe2P2O7 on electrochemical performance of LiFePO4/C cathode materials10.1016/j.jallcom.2015.04.234 ↗
39. Preparation of Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte via a sol-gel method using various Ti sources10.1080/21870764.2020.1793876 ↗
40. Li conductivity in Li1+xTi2-xAlx(PO4)3 (0.3≤ x≤ 0.7) ceramics prepared from sol-gel precursors10.1016/j.jallcom.2020.156051 ↗
41. ARC study of LiFePO4 with different morphologies prepared via three synthetic routes10.1149/2.0801607jes ↗
42. Combined quantitative microscopy on the microstructure and phase evolution in Li1.3Al0.3Ti1.7(PO4)3 ceramics10.1007/s40145-019-0354-0 ↗
43. Increase in grain boundary ionic conductivity of Li1.5Al 0.5Ge1.5(PO4)3 by adding excess lithium10.1016/j.ssi.2014.05.016 ↗
44. Thermal processing conditions for the synthesis of near theoretical density Li5La3Ta2O12 ceramics for ceramic dual-mode detectors10.1016/j.jallcom.2021.159714 ↗
45. High-capacity Li-excess lithium nickel manganese oxide as a Co-free positive electrode material10.1016/j.materresbull.2020.111178 ↗
46. A review of multi-physical fields induced phenomena and effects in spark plasma sintering: fundamentals and applications10.1016/j.matdes.2020.108662 ↗
47. Numerical modeling of heat transfer during spark plasma sintering of titanium carbide10.1016/j.ceramint.2019.11.262 ↗
48. Numerical simulation of heat transfer during spark plasma sintering of zirconium diboride10.1016/j.ceramint.2019.10.240 ↗
49. Kubanska · 2017 · 189