journal article·2021-11

Mitigating voltage decay of Li-Rich layer oxide cathode material via an ultrathin “lithium ion pump” heteroepitaxial surface modification

Jili Li, Junwei Zhao, Chunjuan Tang, Tiekun Jia, Jianhua Hou, Chuanbao Cao, Youqi Zhu

Publisher page

Abstract

Abstract Lithium-rich layered oxides are widely considered as the most promising candidate for high energy density cathode in lithium-ion batteries (LIBs) due to their extraordinary capacity. However, cycle instability, poor rate capability and voltage decay impede their practical applications, which are caused by oxygen release and phase transformation during cycling. In this work, an ultrathin spinel Li4Ti5O12 (LTO) coating acting alike a “lithium ion pump” is built on the surface of lithium-rich layered oxides Li1.2Ni0.2Mn0.6O2 (LLNMO) through solvothermal method. It is identified that spinel LTO and layered LLNMO phases display heteroepitaxial structure resulting in reduction of oxygen loss, phase transformation, capacity decline and voltage fading. The cathode with heteroepitaxial structure demonstrates an acceptable initial coulombic efficiency up to 87.7% (only 79.8% for LLNMO), highly competitive cycling stability (97.9% capacity retention at 0.1C after 100 cycles), minimal voltage decay of 1.22 mV cycle−1 and excellent rate capability (171.5 mAh g−1 at 10C). The supreme electrochemical performances suggest that epitaxial spinel LTO coating can effectively stabilize oxygen framework and the layered structure on the surface of lithium-rich layered oxides for modification of high-capacity cathode in next generation LIBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Precise surface engineering of cathode materials for improved stability of lithium-ion batteries
3. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
4. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
5. Electrochem. Layered cathode materials Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 for lithium-ion batteries10.1149/1.1407994 ↗
6. Identifying surface structural changes in layered Li-excess nickel manganese oxides in high voltage lithium ion batteries: a joint experimental and theoretical study10.1039/c1ee01131f ↗
7. An ultra-long-life lithium-rich Li1.2Mn0.6Ni0.2O2 cathode by three-in-one surface modification for lithium-ion batteries10.1002/anie.202000628 ↗
8. Cathode materials for next generation lithium ion batteries10.1016/j.nanoen.2013.05.013 ↗
9. High-capacity cathode material with high voltage for Li-ion batteries10.1002/adma.201705575 ↗
10. Direct visualization of the reversible O2−/O− redox process in Li-rich cathode materials
11. Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries10.1038/s41560-018-0097-0 ↗
12. A cation/anion co-doped Li1.12Na0.08Ni0.2Mn0.6O1.95F0.05 cathode for lithium ion batteries10.1016/j.nanoen.2019.01.080 ↗
13. Voltage decay and redox asymmetry mitigation by reversible cation migration in lithium-rich layered oxide electrodes10.1038/s41563-019-0572-4 ↗
14. Charge-compensation in 3d-transition-metal-oxide intercalation cathodes through the generation of localized electron holes on oxygen10.1038/nchem.2471 ↗
15. The intriguing question of anionic redox in high-energy density cathodes for Li-ion batteries10.1039/C5EE03048J ↗
16. Revealing grain boundary induced degradation mechanisms in Li-rich cathode materials10.1021/acs.nanolett.9b04620 ↗
17. Structural insights into the formation and voltage degradation of lithium- and manganese-rich layered oxides10.1038/s41467-019-13240-z ↗
18. Coupling between oxygen redox and cation migration explains unusual electrochemistry in lithium-rich layered oxides10.1038/s41467-017-02041-x ↗
19. Gas–solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries10.1038/ncomms12108 ↗
20. Non-topotactic reactions enable high rate capability in Li-rich cathode materials10.1038/s41560-021-00817-6 ↗
21. Zuo · Energy Environ. Sci. · 2020 · 13 · 445010.1039/D0EE01694B ↗
22. Utilizing oxygen redox in layered cathode materials from multiscale perspective10.1002/aenm.202003227 ↗
23. Origin of voltage decay in high-capacity layered oxide electrodes10.1038/nmat4137 ↗
24. Unraveling the voltage decay phenomenon in Li-rich layered oxide cathode of No oxygen activity10.1002/aenm.201902258 ↗
25. Suppressing voltage fading of Li-rich oxide cathode via building a well-protected and partially-protonated surface by polyacrylic acid binder for cycle-stable Li-ion batteries
26. Li-rich oxide cathode material with mosaic spinel grain and a surface coating for high performance Li-ion batteries10.1039/C4TA02947J ↗
27. Accurate control of initial Coulombic efficiency for Li-rich Mn based layered oxides by surface multicomponent integration10.1002/anie.202010531 ↗
28. Controlled atomic solubility in Mn-rich composite material to achieve superior electrochemical performance for Li-ion batteries
29. Structural and electrochemical study of Al2O3 and TiO2 coated Li1.2Ni0.13Mn0.54Co0.13O2 cathode material using ALD10.1002/aenm.201300269 ↗
30. Spinel/layered heterostructured cathode material for high-capacity and high-rate Li-ion batteries10.1002/adma.201300598 ↗
31. Design of surface protective layer of LiF/FeF3 nanoparticles in Li-rich cathode for high-capacity Li-ion batteries10.1016/j.nanoen.2015.04.013 ↗
32. Nanoscale surface modification of lithium-rich layered-oxide composite cathodes for suppressing voltage fade10.1002/anie.201506408 ↗
33. First-principles calculations, electrochemical and X-ray absorption studies of Li-Ni-PO4 surface-treated xLi2MnO3·(1−x)LiMO2 (M = Mn, Ni, Co) electrodes for Li-ion batteries10.1149/2.098202jes ↗
34. Thermal stability enhancement through structure modification on the microsized crystalline grain surface of lithium-rich layered oxides10.1021/acsami.9b21303 ↗
35. A new spinel-layered Li-rich microsphere as a high-rate cathode material for Li-ion batteries10.1002/aenm.201400062 ↗
36. Suppressing surface lattice oxygen release of Li-rich cathode materials via heterostructured spinel Li4Mn5O12 coating
37. Engineering hetero-epitaxial nanostructures with aligned Li-ion channels in Li-rich layered oxides for high-performance cathode application10.1016/j.nanoen.2017.03.051 ↗
38. Composite 'layered-layered-spinel' cathode structures for lithium-ion batteries10.1149/2.049301jes ↗
39. Lithium titanate epitaxial coating on spinel lithium manganese oxide surface for improving the performance of lithium storage capability10.1021/am504319y ↗
40. Facile design and synthesis of Li-rich nanoplates cathodes with habittuned crystal for lithium ion batteries10.1016/j.jpowsour.2016.09.150 ↗
41. Insight of a phase compatible surface coating for long-durable Li-rich layered oxide cathode10.1002/aenm.201901795 ↗
42. A brief review of catalytic cathode materials for Na-CO2 batteries10.3390/catal11050603 ↗
43. Faster activation and slower capacity/voltage fading: a bifunctional urea treatment on lithium-rich cathode materials10.1002/adfm.201909192 ↗
44. Lithium/oxygen incorporation and microstructural evolution during synthesis of Li-rich layered Li[Li0.2Ni0.2Mn0.6]O2 oxides